Cisco 642-242 덤프데모

ITExamDump의Cisco인증 642-242시험대비 덤프는 가격이 착한데 비하면 품질이 너무 좋은 시험전 공부자료입니다. 시험문제적중율이 높아 패스율이 100%에 이르고 있습니다.다른 IT자격증에 관심이 있는 분들은 온라인서비스에 문의하여 덤프유무와 적중율등을 확인할수 있습니다. Cisco인증 642-242덤프로 어려운 시험을 정복하여 IT업계 정상에 오릅시다.

Cisco인증642-242시험은 IT인증시험과목중 가장 인기있는 시험입니다. ITExamDump에서는Cisco인증642-242시험에 대비한 공부가이드를 발췌하여 IT인사들의 시험공부 고민을 덜어드립니다. ITExamDump에서 발췌한 Cisco인증642-242덤프는 실제시험의 모든 범위를 커버하고 있고 모든 시험유형이 포함되어 있어 시험준비 공부의 완벽한 선택입니다.

IT업계에 종사하고 계시나요? 최근 유행하는Cisco인증 642-242 IT인증시험에 도전해볼 생각은 없으신지요? IT 인증자격증 취득 의향이 있으시면 저희. ITExamDump의 Cisco인증 642-242덤프로 시험을 준비하시면 100%시험통과 가능합니다. ITExamDump의 Cisco인증 642-242덤프는 착한 가격에 고품질을 지닌 최고,최신의 버전입니다. ITExamDump덤프로 가볼가요?

Cisco인증 642-242시험은 멋진 IT전문가로 거듭나는 길에서 반드시 넘어야할 높은 산입니다. Cisco인증 642-242시험문제패스가 어렵다한들ITExamDump덤프만 있으면 패스도 간단한 일로 변경됩니다. ITExamDump의Cisco인증 642-242덤프는 100%시험패스율을 보장합니다. Cisco인증 642-242시험문제가 업데이트되면Cisco인증 642-242덤프도 바로 업데이트하여 무료 업데이트서비스를 제공해드리기에 덤프유효기간을 연장해는것으로 됩니다.

ITExamDump는 우수한 IT인증시험 공부가이드를 제공하는 전문 사이트인데 업계에서 높은 인지도를 가지고 있습니다. ITExamDump에서는 IT인증시험에 대비한 모든 덤프자료를 제공해드립니다. Cisco인증 642-242시험을 준비하고 계시는 분들은ITExamDump의Cisco인증 642-242덤프로 시험준비를 해보세요. 놀라운 고득점으로 시험패스를 도와드릴것입니다.시험에서 불합격하면 덤프비용 전액환불을 약속드립니다.

ITExamDump의 Cisco인증642-242시험대비덤프는 실제시험문제 출제경향을 충분히 연구하여 제작한 완벽한 결과물입니다.실제시험문제가 바뀌면 덤프를 제일 빠른 시일내에 업데이트하도록 하기에 한번 구매하시면 1년동안 항상 가장 최신의Cisco인증642-242시험덤프자료를 제공받을수 있습니다.

시험 번호/코드: 642-242

시험 이름: Cisco (Unified Contact Center Enterprise Implementation(UCCEI))

Cisco 인증 642-242시험대비덤프를 찾고 계시다면ITExamDump가 제일 좋은 선택입니다.저희ITExamDump에서는 여라가지 IT자격증시험에 대비하여 모든 과목의 시험대비 자료를 발췌하였습니다. ITExamDump에서 시험대비덤프자료를 구입하시면 시험불합격시 덤프비용환불신청이 가능하고 덤프 1년 무료 업데이트서비스도 가능합니다. ITExamDump를 선택하시면 후회하지 않을것입니다.

642-242 덤프무료샘플다운로드하기: http://www.itexamdump.com/642-242.html

NO.1 Which of the following is not recommended to reside on the C: drive partition of any Cisco Unified ICM
Server?
A. Microsoft SQL Server log files
B. Core Unified ICM software
C. Microsoft SQL Server
D. Unified ICM Historical Data Server Database
Answer: D

Cisco시험문제   642-242   642-242인증   642-242인증

NO.2 What is the correct order of steps to install a new Cisco Unified IP Phone for a Unified Contact Center
Enterprise agent in Unified Communications Manager 5.x?
A. add device and device type, select model, enter the MAC address, and assign to device pool
B. add peripheral and peripheral type, select model, and assign to device pool
C. add phone, select model, enter the MAC address, and assign to device pool
D. add agent, select model, enter the MAC address, and assign to device pool
Answer:A

Cisco   642-242   642-242 dumps   642-242

NO.3 In the Cisco Unified Contact Center Enterprise solution, the same object is configured in multiple
components. Choose the correct set of matching terms that fill in the missing object names in each
component.
A. 1 = CTI route point 2 = JTAPI call control group 3 = DNIS (temporary label)
B. 1 = CTI route point 2 = Dialog control group 3 = DNIS (temporary label)
C. 1 = CTI port 2 = JTAPI call control group 3 = CTI route point
D. 1 = CTI route point 2 = JTAPI call control group 3 = None
Answer:A

Cisco덤프   642-242 dump   642-242 dump   642-242   642-242

NO.4 A Cisco Unified Contact Center Enterprise routing script can send calls directly to a pre-defined label
or extension on a Cisco Unified Communications Manager IP Phone. What is the impact of that sort of
routing on the system?
A. The Cisco Unified Contact Center Enterprise solution will automatically take the call back based on the
ring-no-answer settings for the agent group associated with the call if no one answers within the timeout
parameter.
B. The Cisco Unified Contact Center Enterprise solution cannot send calls outside the defined range of
agent extensions / device targets in the system.
C. The Cisco Unified Contact Center Enterprise solution loses track of the call and reports it as
"transferred out".
D. The Cisco Unified Contact Center Enterprise solution does not lose track of the call if the call is
transferred to a monitored or agent extension / device target in the system.
Answer: C

Cisco   642-242   642-242시험문제   642-242최신덤프

NO.5 In the Cisco Unified Contact Center Enterprise solution, when a CTI Server on a Peripheral Gateway
fails, which of the following will not occur?
A. CTI OS Server disconnects all active agent CTI OS desktop clients from failed server.
B. CTI OS Agent Desktop clients attempt to automatically connect to another CTI OS Server.
C. CTI OS Agent Desktop clients display an "Offline" message.
D. Both CTI OS Servers perform a graceful shutdown to reset CTI OS Agent Desktop client connections.
Answer: D

Cisco   642-242   642-242덤프

NO.6 In a Cisco Unified ICM routing script, what is the best way to assign a sales call a higher priority in the
system?
A. At the beginning of the Sales routing script, use the Queue Priority node to set the priority of all calls
hitting that script to 1.
B. In the Queue to Skill Group node, set the call priority to 1 for any Sales skill group queue nodes.
C. In the Queue to Skill Group node, set the call priority to 10 for any Sales skill group queue nodes.
D. Use a Queue Priority node for support and other non-sales calls with priority 1.
Answer: B

Cisco   642-242   642-242 dump   642-242덤프   642-242

NO.7 In the Cisco Unified Contact Center Enterprise solution, if the Cisco Unified Communications Manager
subscriber for the Cisco voice gateway is down, how will incoming calls be treated?
A. The call will get a "fast busy" and be terminated by the gateway.
B. The voice gateway will reroute the call to a secondary CTI route point.
C. The voice gateway will use the alternative/backup subscriber in the cluster for call control.
D. The voice gateway will route around the subscriber to an IP IVR port.
Answer: C

Cisco기출문제   642-242시험문제   642-242 pdf

NO.8 Media termination points in Cisco Unified Communications Manager provide media services such as
call hold and call transfer for a call routed to an H.323 endpoint. To configure an MTP resource, which two
items must be configured? (Choose two.)
A. MTP type
B. MAC address
C. media routing domain
D. device pool
E. location
Answer:AD

Cisco   642-242인증   642-242

NO.9 When configuring a Cisco Unified Communications Manager dial plan to allow for dialing 911 or placing
other emergency calls, where should Urgent Priority be checked off in?
A. route pattern
B. route list
C. route group
D. calling search space
Answer:A

Cisco   642-242시험문제   642-242자료   642-242 pdf

NO.10 When setting up the Cisco Unified IP IVR 4.1(x) to communicate with Cisco Unified Communications
Manager, how do you configure the IP IVR to communicate with more than one Cisco Unified
Communications Manager server in the cluster?
A. On the JTAPI Provider Configuration web page, there are two fields to input the IP addresses or host
names of the Cisco Unified Communications Manager servers.
B. On the JTAPI Provider Configuration web page, you can enter only one Cisco Unified Communications
Manager server for the JTAPI provider.
C. On the JTAPI Provider Configuration web page, list the IP addresses or host names of the Cisco
Unified Communications Manager servers separated by a comma.
D. On the JTAPI Provider Configuration web page, enter the IP address or host name of the publisher and
when you synchronize the configuration, the IP IVR will automatically configure the available Cisco
Unified Communications Manager servers.
Answer: C

Cisco   642-242덤프   642-242인증   642-242자격증

NO.11 In the Cisco Unified Communications Manager 4.1(x), what is the first step to create a new CTI route
point to be associated with a JTAPI user?
A. Create the CTI route point device and assign a directory number.
B. Using device association, map the CTI route point directory number to the JTAPI user.
C. Create a calling search space that includes the JTAPI user and CTI route point directory number.
D. Create a new directory number and associate it to the JTAPI user.
Answer:A

Cisco   642-242   642-242   642-242최신덤프   642-242 dump

NO.12 The Cisco Unified Contact Center Enterprise can queue calls at different queue priorities. In this
sample script, at what priority will the call be queued?
A. Three (3) ?As set in the Queue Priority node.
B. Five (5) ?The default for the Queue to Skill Group node, unless it was set otherwise.
C. None, as queue priority only is used when more than one skill group is used in the Queue to Skill.
D. It depends, as each call hitting the script will reset the priority for all calls when the Queue Priority node
is executed.
Answer: B

Cisco자격증   642-242   642-242자격증   642-242덤프   642-242시험문제   642-242 dumps

NO.13 In the Cisco Unified Contact Center Enterprise, a Dialed Number Plan can be created to make it
easier for agents to perform transfers. Which of the following dialed numbers are invalid for agents to dial
from the plan?
A. SALES
B. 3%45
C. 3333
D. TEC123
Answer: B

Cisco최신덤프   642-242   642-242   642-242   642-242기출문제

NO.14 In the Cisco Unified Contact Center Enterprise solution, if an agent is in a Reserved state, which of the
following actions can the agent take?
A. Log off.
B. Change state to Not Ready.
C. Answer the call being sent to them.
D. Enter wrap-up data from the prior call.
Answer: C

Cisco   642-242시험문제   642-242 dumps   642-242자격증

NO.15 In the Cisco Unified Contact Center Enterprise solution, how are CTI route points and CTI ports created
in the Unified IP IVR 4.0(x)?
A. CTI route points and CTI ports are created and associated to the IP IVR user in Cisco Unified
Communications Manager Administration prior to configuring the CTI route points in the IP IVR in the
CRS Administration menu.
B. CTI route points and CTI ports are created from the CRS Administration menu. The CRS
Administration will automatically create and associate the CTI route points and CTI ports in Unified
Communications Manager.
C. CTI route points and CTI ports are created from the CRS Administration first and then the CTI route
points and CTI ports are associated to the correct user using Unified Communications Manager
Administration manually.
D. CTI route points and CTI ports can either be created from the CRS Administration menu or from the
Cisco Unified Communications Manager Administration as long as the CTI route points and CTI ports are
associated to the correct IP IVR user profile.
Answer: B

Cisco최신덤프   642-242시험문제   642-242   642-242자료   642-242

ITExamDump의 도움으로 여러분은 많은 시간과 돈을 들이지 않으셔도 혹은 여러학원등을 다니시지 않으셔도 우리 덤프로 안전하게 시험을 통과하실 수 있습니다.Cisco 642-242시험자료는 우리 ITExamDump에서 실제시험에 의하여 만들어진 것입니다. 지금까지의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는Cisco 642-242시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다.