ITExamDump의 LSI인증 L50-502덤프를 선택하여LSI인증 L50-502시험공부를 하는건 제일 현명한 선택입니다. 시험에서 떨어지면 덤프비용 전액을 환불처리해드리고LSI인증 L50-502시험이 바뀌면 덤프도 업데이트하여 고객님께 최신버전을 발송해드립니다. LSI인증 L50-502덤프뿐만아니라 IT인증시험에 관한 모든 덤프를 제공해드립니다.
ITExamDump의LSI인증L50-502자료는 제일 적중률 높고 전면적인 덤프임으로 여러분은 100%한번에 응시로 패스하실 수 있습니다. 그리고 우리는 덤프를 구매 시 일년무료 업뎃을 제공합니다. 여러분은 먼저 우리 ITExamDump사이트에서 제공되는LSI인증L50-502시험덤프의 일부분인 데모 즉 문제와 답을 다운받으셔서 체험해보실 수 잇습니다.
시험 번호/코드: L50-502
시험 이름: LSI (LSI SVM5 Solutions Architect)
ITExamDump는 여러분이 빠른 시일 내에LSI L50-502인증시험을 효과적으로 터득할 수 있는 사이트입니다.LSI L50-502덤프는 보장하는 덤프입니다. 만약 시험에서 떨어지셨다고 하면 우리는 무조건 덤프전액 환불을 약속 드립니다. 우리ITExamDump 사이트에서LSI L50-502관련자료의 일부분 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump의LSI L50-502덤프로 자신 있는 시험준비를 하세요.
ITExamDump의 LSI인증 L50-502덤프를 구매하시면 1년동안 무료 업데이트서비스버전을 받을수 있습니다. 시험문제가 변경되면 업데이트 하도록 최선을 다하기에ITExamDump의 LSI인증 L50-502덤프의 유효기간을 연장시켜드리는 셈입니다.퍼펙트한 구매후는 서비스는ITExamDump의 LSI인증 L50-502덤프를 구매하시면 받을수 있습니다.
LSI L50-502인증시험패스에는 많은 방법이 있습니다. 먼저 많은 시간을 투자하고 신경을 써서 전문적으로 과련 지식을 터득한다거나; 아니면 적은 시간투자와 적은 돈을 들여 ITExamDump의 인증시험덤프를 구매하는 방법 등이 있습니다.
L50-502 덤프무료샘플다운로드하기: http://www.itexamdump.com/L50-502.html
NO.1 A customer has an AIX high availability cluster multiprocessing (HACMP) environment and would like to
use SVM to provide additional storage to the cluster. Which consideration must be met to access the new
volumes?
A. The AIX light agent must be installed on all nodes.
B. The new volumes must be imported into a volume group.
C. The LSI failover driver must be installed on all nodes.
D. The MPIO driver must be disabled on all nodes.
Answer: A
LSI덤프 L50-502 L50-502덤프
NO.2 A customer would like to implement SVM into their current storage environment and has asked you to
provide a detailed overview of both the SVM and DPM architectures. Where would you suggest that they
locate the required information?
A. Host Compatibility Matrix
B. Deployment Guide for SVM 4
C. SVM User Guide
D. Configuration Knowledge Base for SVM 5
Answer: C
LSI L50-502자격증 L50-502
NO.3 Your customer is looking for a high availability solution for company-critical data with an RPO of 0.
Periodically the customer would like to verify the integrity of replicated data. You configure two SVM
domains on two sites and use synchronous multiMirror between the two sites. What are two methods to
verify the data? (Choose two.)
A. Create a PiT on the synchronous multiMirror group, create a view on the second synchronous mirror
job PiT and assign it to a host.
B. Use multiCopy for one of the synchronous multiMirror jobs and then assign the destination volume to a
host.
C. Create a PiT on the second synchronous multiMirror job, create a view for that PiT and assign it to a
host.
D. Create a PiT on the first synchronous multiMirror job, create a view for that PiT and assign it to a host.
Answer: A,C
LSI L50-502 L50-502 L50-502
NO.4 Your customer has recently begun using hourly PiTs for rapid application recovery. The desire is to
implement a data retention plan where each hourly PiT is kept on disk until 8:00 PM. Four weeks?worth
the customer would like to keep a daily snapshot copy of the data for seven days. Also the customer
wants to keep four weeks worth of weekly views on a secondary, low cost array. The solution should
minimize disk utilization on the primary array. Which three tasks would you implement to accomplish this
goal? (Choose three.)
A. Create a multiCopy of the application data and keep seven copies.
B. Create a View on the most recent PiT each night at 8:00 PM and retain for seven days.
C. Create a multiCopy of the Sunday View to the second array and keep four copies.
D. Purge PiTs on the source volume at 8:00 PM to keep seven PiTs.
E. Use multiMigrate to move the Sunday View to the second array and keep four copies.
Answer: B,C,D
LSI L50-502 L50-502 L50-502 dump L50-502
NO.5 Your customer would like to consolidate multiple storage arrays which are currently under-utilized. The
SAN is not currently managed by SVM. The customer desires the minimal impact to their applications.
Which two statements describe the process to consolidate the arrays under SVM? (Choose two.)
A. Import existing LUNs into SVM pools.
B. Use multiMigrate to move the volumes to the desired array.
C. Use asynchronous mirror to move the volumes to the desired array.
D. Use multiMigrate to move the volumes to the desired array and remove SVM.
Answer: A,B
LSI최신덤프 L50-502기출문제 L50-502 L50-502
NO.6 You are deploying ESX servers with SVM. You have followed the recommended best practice and
have designed your front-end SAN to have redundant fabrics and allowed for both HBA initiator ports to
see both DPMs. You have created SVM volumes and have presented them to your ESX servers. After
performing an HBA rescan from an ESX server, how many paths should be available to each LUN?
A. 2
B. 4
C. 8
D. 16
Answer: B
LSI L50-502 L50-502 L50-502
NO.7 You have a disaster recovery scenario where newly created SVM Views will be presented to an ESX
server or ESX cluster at a secondary site. To avoid importing the views as new volumes, which ESX
advanced setting should be enabled?
A. port retry
B. resignature
C. device reset
D. LUN reset
Answer: B
LSI자격증 L50-502 dumps L50-502 L50-502기출문제
NO.8 A customer has an environment that includes existing VMware disks that must be imported into SVM.
VMware marks a signature on the volumes which identifies the controller WWNN and LUN ID. Which
statement describes what you need to take into account when migrating the VMware disks under SVM
control?
A. VMware will not resignature automatically.
B. VMware will present the same LUN ID after importing.
C. VMware will modify the DPM WWNN to match the array WWNN.
D. VMware resignaturing must be set correctly.
Answer: D
LSI dumps L50-502덤프 L50-502자료 L50-502
NO.9 You are implementing zoning for an SVM 5 environment. Which rule should you observe when zoning
servers with DPMs?
A. There should be no more than four paths per DPM to any one server.
B. There should be no more than two paths per DPM to any one server.
C. All servers and DPM front-end ports should reside in the same zone.
D. The servers should be zoned directly with the storage controllers.
Answer: B
LSI L50-502자격증 L50-502덤프
NO.10 You are trying to determine the optimal solution to meet the data recovery needs of a customer. What
will provide your customer with the smallest recovery time objective and array failure protection?
A. asynchronous multiMirror
B. multiView
C. multiCopy
D. synchronous multiMirror
Answer: D
LSI L50-502 L50-502 dump
NO.11 A financial institution has an Oracle application that is critical to its business. Which three factors will
enable you to assess how to provide high availability and recovery? (Choose three.)
A. application recovery time objective
B. application recovery point objective
C. distance between data centers
D. number of network adapters
E. distance between servers
Answer: A,B,C
LSI자료 L50-502시험문제 L50-502 pdf L50-502 L50-502 dump
NO.12 A retailer with a SQL database must pull statistics from a production database but would like to do so
without interfering with production work. The statistics are required by three different departments. Which
two methods could be used to do this? (Choose two.)
A. Use multiMigrate on the database volume with one job and assign the destination volume to the three
hosts.
B. Use multiMirror asynchronous on the database volume with three jobs and assign the jobs to the three
hosts.
C. Use multiView on the database volume to create a PiT; create three views for that PiT and assign it to
the three hosts.
D. Use multiCopy on the database volume with three jobs and assign each destination volume to the
three hosts.
Answer: C,D
LSI시험문제 L50-502 L50-502기출문제 L50-502
NO.13 Which storage arrays can be migrated under SVM 5 control.?
A. SAS storage array
B. iSCSI storage array
C. FC storage array
D. Infiniband storage array
Answer: C
LSI L50-502 dump L50-502
NO.14 A customer is using SVM to provide five volumes to a Windows 2008 server. These volumes have
been converted to dynamic disks and striped using the OS. Which consideration should be met if the
customer would like to use PiTs and views to access this data from another server?
A. The data cannot be accessed from another host.
B. multiMigrate should be used to migrate the data to a single volume.
C. A consistency group should be defined for the five volumes.
D. The standard agent must be used to access the view.
Answer: C
LSI L50-502인증 L50-502덤프 L50-502 L50-502최신덤프
NO.15 Your customer wants to run backups at any time of the day, using snapshots of production data, leaving
production systems fully online and available during backups. Which SVM application would be used to
achieve their online backup requirement?
A. multiMigrate
B. multiMirror
C. multiView
D. SVM volume management
Answer: C
LSI pdf L50-502 L50-502 L50-502 dump L50-502 dump
LSI인증L50-502시험은 국제적으로 승인해주는 IT인증시험의 한과목입니다. 근 몇년간 IT인사들에게 최고의 인기를 누리고 있는 과목으로서 그 난이도 또한 높습니다. 자격증을 취득하여 직장에서 혹은 IT업계에서 자시만의 위치를 찾으련다면 자격증 취득이 필수입니다. LSI인증L50-502시험을 패스하고 싶은 분들은ITExamDump제품으로 가보세요.
댓글 없음:
댓글 쓰기