Microsoft 자격증 070-561 시험덤프

IT업계 종사자라면 누구나 Microsoft 인증070-561시험을 패스하고 싶어하리라고 믿습니다. 많은 분들이 이렇게 좋은 인증시험은 아주 어렵다고 생각합니다. 네 맞습니다. 패스할 확율은 아주 낮습니다. 노력하지 않고야 당연히 불가능한 일이 아니겠습니까? Microsoft 인증070-561 시험은 기초 지식 그리고 능숙한 전업지식이 필요 합니다. ITExamDump는 여러분들한테Microsoft 인증070-561시험을 쉽게 빨리 패스할 수 있도록 도와주는 사이트입니다. ITExamDump의Microsoft 인증070-561시험관련 자료로 여러분은 짧은 시간내에 간단하게 시험을 패스할수 있습니다. 시간도 절약하고 돈도 적게 들이는 이런 제안은 여러분들한테 딱 좋은 해결책이라고 봅니다.

빨리 ITExamDump 덤프를 장바구니에 넣으시죠. 그러면 100프로 자신감으로 응시하셔서 한번에 안전하게 패스하실 수 있습니다. 단 한번으로Microsoft 070-561인증시험을 패스한다…… 여러분은 절대 후회할 일 없습니다.

시험 번호/코드: 070-561

시험 이름: Microsoft (TS: MS .NET Framework 3.5, ADO.NET Application Development)

네트워크 전성기에 있는 지금 인터넷에서Microsoft 인증070-561시험자료를 많이 검색할수 있습니다. 하지만 왜ITExamDump덤프자료만을 믿어야 할가요? ITExamDump덤프자료는 실제시험문제의 모든 유형에 근거하여 예상문제를 묶어둔 문제은행입니다.시험적중율이 거의 100%에 달하여Microsoft 인증070-561시험을 한방에 통과하도록 도와드립니다.

ITExamDump의 Microsoft인증 070-561덤프를 구매하여 공부한지 일주일만에 바로 시험을 보았는데 고득점으로 시험을 패스했습니다.이는ITExamDump의 Microsoft인증 070-561덤프를 구매한 분이 전해온 희소식입니다. 다른 자료 필요없이 단지 저희Microsoft인증 070-561덤프로 이렇게 어려운 시험을 일주일만에 패스하고 자격증을 취득할수 있습니다.덤프가격도 다른 사이트보다 만만하여 부담없이 덤프마련이 가능합니다.구매전 무료샘플을 다운받아 보시면 믿음을 느낄것입니다.

Microsoft인증 070-561 시험은 최근 제일 인기있는 인증시험입니다. IT업계에 종사하시는 분들은 자격증취득으로 자신의 가치를 업그레이드할수 있습니다. Microsoft인증 070-561 시험은 유용한 IT자격증을 취득할수 있는 시험중의 한과목입니다. ITExamDump에서 제공해드리는Microsoft인증 070-561 덤프는 여러분들이 한방에 시험에서 통과하도록 도와드립니다. 덤프를 공부하는 과정은 IT지식을 더 많이 배워가는 과정입니다. 시험대비뿐만아니라 많은 지식을 배워드릴수 있는 덤프를ITExamDump에서 제공해드립니다. ITExamDump덤프는 선택하시면 성공을 선택한것입니다.

ITExamDump의 Microsoft인증 070-561덤프를 구매하시면 1년동안 무료 업데이트서비스버전을 받을수 있습니다. 시험문제가 변경되면 업데이트 하도록 최선을 다하기에ITExamDump의 Microsoft인증 070-561덤프의 유효기간을 연장시켜드리는 셈입니다.퍼펙트한 구매후는 서비스는ITExamDump의 Microsoft인증 070-561덤프를 구매하시면 받을수 있습니다.

070-561 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-561.html

NO.1 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment.
string queryString = "Select Name, Age from dbo.Table_1";
SqlCommand command = new SqlCommand(queryString, (SqlConnection)connection));
You need to get the value that is contained in the first column of the first row of the result set returned by
the query.
Which code segment should you use?
A. var value = command.ExecuteScalar();
string requiredValue = value.ToString();
B. var value = command.ExecuteNonQuery();
string requiredValue = value.ToString();
C. var value = command.ExecuteReader(CommandBehavior.SingleRow);
string requiredValue = value[0].ToString();
D. var value = command.ExecuteReader(CommandBehavior.SingleRow);
string requiredValue = value[1].ToString();
Answer: A

Microsoft자료   070-561   070-561자격증   070-561기출문제   070-561기출문제

NO.2 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You need to separate the security-related exceptions from the other exceptions for database operations at
run time.
Which code segment should you use?
A. Catch ex As System.Security.SecurityException
'Handle all database security related exceptions.
End Try
B. Catch ex As System.Data.SqlClient.SqlException
For i As Integer = 0 To ex.Errors.Count - 1
If ex.Errors(i).[Class].ToString() = "14" Then
'Handle all database security related exceptions.
Else
'Handle other exceptions
End If
Next
End Try
C. Catch ex As System.Data.SqlClient.SqlException
For i As Integer = 0 To ex.Errors.Count - 1
If ex.Errors(i).Number = 14 Then
'Handle all database security related exceptions.
Else
'Handle other exceptions
End If
Next
End Try
D. Catch ex As System.Data.SqlClient.SqlException
For i As Integer = 0 To ex.Errors.Count - 1
If ex.Errors(i).Message.Contains("Security") Then
'Handle all database security related exceptions.
Else
'Handle other exceptions
End If
Next
End Try
Answer: B

Microsoft   070-561   070-561   070-561

NO.3 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment.
Dim queryString As String = "Select Name, Age from dbo.Table_1"
Dim command As New _SqlCommand(queryString, DirectCast(connection, SqlConnection))
You need to get the value that is contained in the first column of the first row of the result set returned by
the query.
Which code segment should you use?
A. Dim value As Object = command.ExecuteScalar()
Dim requiredValue As String = value.ToString()
B. Dim value As Integer = command.ExecuteNonQuery()
Dim requiredValue As String = value.ToString()
C. Dim value As SqlDataReader = _command.ExecuteReader(CommandBehavior.SingleRow)
Dim requiredValue As String = value(0).ToString()
D. Dim value As SqlDataReader = _command.ExecuteReader(CommandBehavior.SingleRow)
Dim requiredValue As String = value(1).ToString()
Answer: A

Microsoft   070-561   070-561인증   070-561시험문제   070-561

NO.4 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application uses Microsoft SQL Server 2005.
You write the following code segment. (Line numbers are included for reference only.)
01 String myConnString = "User
02 ID=<username>;password=<strong password>;Initial
03 Catalog=pubs;Data Source=myServer";
04 SqlConnection myConnection = new
05 SqlConnection(myConnString);
06 SqlCommand myCommand = new SqlCommand();
07 DbDataReader myReader;
08 myCommand.CommandType =
09 CommandType.Text;
10 myCommand.Connection = myConnection;
11 myCommand.CommandText = "Select * from Table1;
Select * from Table2;";
12 int RecordCount = 0;
13 try
14 {
15 myConnection.Open();
16
17 }
18 catch (Exception ex)
19 {
20 }
21 finally

NO.5 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a DataSet object named orderDS. The object contains a table named Order as
shown in the following exhibit.
The application uses a SqlDataAdapter object named daOrder to populate the Order table.
You write the following code segment. (Line numbers are included for reference only.)
01 private void FillOrderTable(int pageIndex) {
02 int pageSize = 5;
03
04 }
You need to fill the Order table with the next set of 5 records for each increase in the pageIndex value.
Which code segment should you insert at line 03?
A. string sql = "SELECT SalesOrderID, CustomerID, OrderDate FROM Sales.SalesOrderHeader";
daOrder.SelectCommand.CommandText = sql;
daOrder.Fill(orderDS, pageIndex, pageSize, "Order");
B. int startRecord = (pageIndex - 1) * pageSize;
string sql = "SELECT SalesOrderID, CustomerID, OrderDate FROM Sales.SalesOrderHeader";
daOrder.SelectCommand.CommandText = sql;
daOrder.Fill(orderDS, startRecord, pageSize, "Order");
C. string sql = string.Format("SELECT TOP {0} SalesOrderID, CustomerID,
OrderDate FROM Sales.SalesOrderHeader WHERE SalesOrderID > {1}", pageSize, pageIndex);
daOrder.SelectCommand.CommandText = sql;
daOrder.Fill(orderDS, "Order");
D. int startRecord = (pageIndex - 1) * pageSize;
string sql = string.Format("SELECT TOP {0} SalesOrderID, CustomerID,
OrderDate FROM Sales.SalesOrderHeader WHERE SalesOrderID > {1}",
pageSize, startRecord);
daOrder.SelectCommand.CommandText = sql;
daOrder.Fill(orderDS, "Order");
Answer: B

Microsoft자료   070-561   070-561인증   070-561자격증   070-561

NO.6 {

NO.7 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application has a DataTable object named OrderDetailTable. The object has the following columns:
ID
OrderID
ProductID
Quantity
LineTotal
The OrderDetailTable object is populated with data provided by a business partner. Some of the records
contain a null value in the LineTotal field and 0 in the Quantity field.
You write the following code segment. (Line numbers are included for reference only.)
01 Dim col As New DataColumn("UnitPrice", GetType(Decimal))
02
03 OrderDetailTable.Columns.Add(col)
You need to add a DataColumn named UnitPrice to the OrderDetailTable object.
Which line of code should you insert at line 02?
A. col.Expression = "LineTotal/Quantity"
B. col.Expression = "LineTotal/ISNULL(Quantity, 1)"
C. col.Expression = "LineTotal.Value/ISNULL(Quantity.Value, 1)"
D. col.Expression = "iif(Quantity > 0, LineTotal/Quantity, 0)"
Answer: D

Microsoft최신덤프   070-561 dump   070-561   070-561   070-561

NO.8 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment.
string query = "Select EmpNo, EmpName from dbo.Table_1;
select Name,Age from dbo.Table_2";
SqlCommand command = new SqlCommand(query, connection);
SqlDataReader reader = command.ExecuteReader();
You need to ensure that the application reads all the rows returned by the code segment.
Which code segment should you use?
A. while (reader.NextResult())
{
Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
reader.Read();
}
B. while (reader.Read())
{
Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
reader.NextResult();
}
C. while (reader.Read())
{
Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
}
reader.NextResult();
while (reader.Read())
{
Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
}
D. while (reader.NextResult())
{
Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
}
reader.Read();
while (reader.NextResult())
{
Console.WriteLine(String.Format("{0}, {1}",reader[0], reader[1]));
}
Answer: C

Microsoft   070-561   070-561기출문제

NO.9 myConnection.Close();

NO.10 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a SqlDataAdapter object named daOrder. The SelectCommand property of the
daOrder object is set.
You write the following code segment. (Line numbers are included for reference only.)
01 Private Sub ModifyDataAdapter()
02
03 End Sub
You need to ensure that the daOrder object can also handle updates.
Which code segment should you insert at line 02?
A. Dim cb As New SqlCommandBuilder(daOrder)
cb.RefreshSchema()
B. Dim cb As New SqlCommandBuilder(daOrder)
cb.SetAllValues = True
C. Dim cb As New SqlCommandBuilder(daOrder)
daOrder.DeleteCommand = cb.GetDeleteCommand()
daOrder.InsertCommand = cb.GetInsertCommand()
daOrder.UpdateCommand = cb.GetUpdateCommand()
D. Dim cb As New SqlCommandBuilder(daOrder)
cb.RefreshSchema()
cb.GetDeleteCommand()
cb.GetInsertCommand()
cb.GetUpdateCommand()
Answer: C

Microsoft pdf   070-561   070-561자료   070-561   070-561

NO.11 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The application throws an exception when the SQL Connection object is used.
You need to handle the exception.
Which code segment should you use?
A. try
{
if(null!=conn)
conn.Close();
// code for the query
}
catch (Exception ex)
{
// handle exception
}
finally
{
if(null==conn)
conn.Open();
}
B. try
{
conn.Close();
// code for the query
}
catch (Exception ex)
{
// handle exception
}
finally
{
if(null!=conn)
conn.Open();
}
C. try
{
conn.Open();
// code for the query
}
catch (Exception ex)
{
// handle exception
}
finally
{
if(null!=conn)
conn.Close();
}
D. try
{
conn.Open();
// code for the query
}
catch (Exception ex)
{
// handle exception
}
finally
{
if(null==conn)
conn.Close();
}
Answer: C

Microsoft자료   070-561   070-561   070-561최신덤프   070-561 pdf

NO.12 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a TextBox control named txtProductID. The application will return a list of active
products that have the ProductID field equal to the txtProductID.Text property.
You write the following code segment. (Line numbers are included for reference only.)
01 private DataSet GetProducts(SqlConnection cn) {
02 SqlCommand cmd = new SqlCommand();
03 cmd.Connection = cn;
04 SqlDataAdapter da = new SqlDataAdapter(cmd);
05 DataSet ds = new DataSet();
06
07 da.Fill(ds);
08 return ds;
09 }
You need to populate the DataSet object with product records while avoiding possible SQL injection
attacks.
Which code segment should you insert at line 06?
A. cmd.CommandText = string.Format("sp_sqlexec 'SELECT ProductID,
Name FROM Product WHERE ProductID={0} AND IsActive=1'", txtProductID.Text);
B. cmd.CommandText = string.Format("SELECT ProductID, Name FROM
Product WHERE ProductID={0} AND IsActive=1", txtProductID.Text);
cmd.Prepare();
C. cmd.CommandText = string.Format("SELECT ProductID, Name FROM
Product WHERE ProductID={0} AND IsActive=1", txtProductID.Text);
cmd.CommandType = CommandType.TableDirect;
D. cmd.CommandText = "SELECT ProductID, Name FROM Product WHERE
ProductID=@productID AND IsActive=1";
cmd.Parameters.AddWithValue("@productID", txtProductID.Text);
Answer: D

Microsoft   070-561   070-561시험문제   070-561최신덤프   070-561

NO.13 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a DataSet object named OrderDS that has the Order and OrderDetail tables as
shown in the following exhibit.
You write the following code segment. (Line numbers are included for reference only.)
01 private void GetOrders(SqlDataConnection cn) {
02 SqlCommand cmd = cn.CreateCommand();
03 cmd.CommandText = "Select * from [Order];
Select * from [OrderDetail];";
04 SqlDataAdapter da = new SqlDataAdapter(cmd);
05
06 }
You need to ensure that the Order and the OrderDetail tables are populated.
Which code segment should you insert at line 05?
A. da.Fill(OrderDS);
B. da.Fill(OrderDS.Order);
da.Fill(OrderDS.OrderDetail);
C. da.TableMappings.AddRange(new DataTableMapping[] {
new DataTableMapping("Table", "Order"),
new DataTableMapping("Table1", "OrderDetail")});
da.Fill(OrderDS);
D. DataTableMapping mapOrder = new DataTableMapping();
mapOrder.DataSetTable = "Order";
DataTableMapping mapOrderDetail = new DataTableMapping();
mapOrder.DataSetTable = "OrderDetail";
da.TableMappings.AddRange(new DataTableMapping[]
{ mapOrder, mapOrderDetail });
Da.Fill(OrderDS);
Answer: C

Microsoft자료   070-561   070-561   070-561자격증

NO.14 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The connection string of the application is defined in the following manner.
"Server=Prod;Database=WingtipToys;Integrated
Security=SSPI;Asynchronous Processing=true"
The application contains the following code segment. (Line numbers are included for reference only.)
01 protected void UpdateData(SqlCommand cmd) {
02 cmd.Connection.Open();
03
04 lblResult.Text = "Updating ...";
05 }
The cmd object takes a long time to execute.
You need to ensure that the application continues to execute while cmd is executing.
What should you do?
A. Insert the following code segment at line 03.
cmd.BeginExecuteNonQuery(new AsyncCallback(UpdateComplete), cmd);
Add the following code segment.
private void UpdateComplete (IAsyncResult ar) {
int count = (int)ar.AsyncState;
LogResults(count);
}
B. Insert the following code segment at line 03.
cmd.BeginExecuteNonQuery(new AsyncCallback(UpdateComplete), cmd);
Add the following code segment.
private void UpdateComplete (IAsyncResult ar) {
SqlCommand cmd = (SqlCommand)ar.AsyncState;
int count = cmd.EndExecuteNonQuery(ar);
LogResults(count);
}
C. Insert the following code segment at line 03.
cmd.StatementCompleted += new
StatementCompletedEventHandler(UpdateComplete);
cmd.ExecuteNonQuery();
Add the following code segment.
private void UpdateComplete (object sender, StatementCompletedEventArgs e) {
int count = e.RecordCount;
LogResults(count);
}
D. Insert the following code segment at line 03.
SqlNotificationRequest notification = new
SqlNotificationRequest("UpdateComplete", "", 10000);
cmd.Notification = notification;
cmd.ExecuteNonQuery();
Add the following code segment.
private void UpdateComplete(SqlNotificationRequest notice) {
int count = int.Parse(notice.UserData);
LogResults(count);
}
Answer: B

Microsoft인증   070-561   070-561자격증   070-561기출문제   070-561기출문제

NO.15 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a TextBox control named txtProductID. The application will return a list of active
products that have the ProductID field equal to the txtProductID.Text property.
You write the following code segment. (Line numbers are included for reference only.)
01 Private Function GetProducts(ByVal cn _
As SqlConnection) As DataSet
02 Dim cmd As New SqlCommand()
03 cmd.Connection = cn
04 Dim da As New SqlDataAdapter(cmd)
05 Dim ds As New DataSet()
06
07 da.Fill(ds)
08 Return ds
09 End Function
You need to populate the DataSet object with product records while avoiding possible SQL injection
attacks.
Which code segment should you insert at line 06?
A. cmd.CommandText = _
String.Format("sp_sqlexec 'SELECT ProductID, " + _
"Name FROM Product WHERE ProductID={0} AND IsActive=1'", _
txtProductID.Text)
B. cmd.CommandText = _
String.Format("SELECT ProductID, " + _
"Name FROM Product WHERE ProductID={0} AND IsActive=1", _
txtProductID.Text)
cmd.Prepare()
C. cmd.CommandText = _
String.Format("SELECT ProductID, " + _
"Name FROM Product WHERE ProductID={0} AND IsActive=1", _
txtProductID.Text)
cmd.CommandType = CommandType.TableDirect
D. cmd.CommandText = "SELECT ProductID, " + _
"Name FROM Product WHERE ProductID=@productID AND IsActive=1"
cmd.Parameters.AddWithValue("@productID", txtProductID.Text)
Answer: D

Microsoft   070-561   070-561시험문제   070-561

NO.16 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The application throws an exception when the SQL Connection object is used.
You need to handle the exception.
Which code segment should you use?
A. Try
If conn IsNot Nothing Then
conn.Close()
' code for the query
End If
Catch ex As Exception
' handle exception
Finally
If conn Is Nothing Then
conn.Open()
End If
End Try
B. Try
' code for the query
conn.Close()
Catch ex As Exception
' handle exception
Finally
If conn IsNot Nothing Then
conn.Open()
End If
End Try
C. Try
' code for the query
conn.Open()
Catch ex As Exception
' handle exception
Finally
If conn IsNot Nothing Then
conn.Close()
End If
End Try
D. Try
' code for the query
conn.Open()
Catch ex As Exception
' handle exception
Finally
If conn Is Nothing Then
conn.Close()
End If
End Try
Answer: C

Microsoft자료   070-561덤프   070-561 pdf   070-561자료

NO.17 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a SqlDataAdapter object named daOrder. The SelectCommand property of the
daOrder object is set.
You write the following code segment. (Line numbers are included for reference only.)
01 private void ModifyDataAdapter() {
02
03 }
You need to ensure that the daOrder object can also handle updates.
Which code segment should you insert at line 02?
A. SqlCommandBuilder cb = new SqlCommandBuilder(daOrder);
cb.RefreshSchema();
B. SqlCommandBuilder cb = new SqlCommandBuilder(daOrder);
cb.SetAllValues = true;
C. SqlCommandBuilder cb = new SqlCommandBuilder(daOrder);
daOrder.DeleteCommand = cb.GetDeleteCommand();
daOrder.InsertCommand = cb.GetInsertCommand();
daOrder.UpdateCommand = cb.GetUpdateCommand();
D. SqlCommandBuilder cb = new SqlCommandBuilder(daOrder);
cb.RefreshSchema();
cb.GetDeleteCommand();
cb.GetInsertCommand();
cb.GetUpdateCommand();
Answer: C

Microsoft   070-561   070-561   070-561자격증   070-561기출문제

NO.18 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a DataSet object named OrderDS that has the Order and OrderDetail tables as
shown in the following exhibit.
You write the following code segment. (Line numbers are included for reference only.)
01 Private Sub GetOrders(ByVal cn As SqlConnection)
02 Dim cmd As SqlCommand = cn.CreateCommand()
03 cmd.CommandText = "Select * from [Order]; " + _
"Select * from [OrderDetail];"
04 Dim da As New SqlDataAdapter(cmd)
05
06 End Sub
You need to ensure that the Order and the OrderDetail tables are populated.
Which code segment should you insert at line 05?
A. da.Fill(OrderDS)
B. da.Fill(OrderDS.Order)
da.Fill(OrderDS.OrderDetail)
C. da.TableMappings.AddRange(New DataTableMapping() _
{New DataTableMapping("Table", "Order"), _
New DataTableMapping("Table1", "OrderDetail")})
da.Fill(OrderDS)
D. Dim mapOrder As New DataTableMapping()
mapOrder.DataSetTable = "Order"
Dim mapOrderDetail As New DataTableMapping()
mapOrder.DataSetTable = "OrderDetail"
da.TableMappings.AddRange(New DataTableMapping() _
{mapOrder, mapOrderDetail})
da.Fill(OrderDS)
Answer: C

Microsoft pdf   070-561   070-561 pdf   070-561덤프   070-561기출문제

NO.19 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The application analyzes large amounts of transaction data that are stored in a different database.
You write the following code segment. (Line numbers are included for reference only.)
01 Using connection As New SqlConnection(sourceConnectionString)
02 Using connection2 As _
New SqlConnection(destinationConnectionString)
03 Using command As New SqlCommand()
04 connection.Open()
05 connection2.Open()
06 Using reader As SqlDataReader = command.ExecuteReader()
07 Using bulkCopy As New SqlBulkCopy(connection2)
08
09 End Using
10 End Using
11 End Using
12 End Using
13 End Using
You need to copy the transaction data to the database of the application.
Which code segment should you insert at line 08?
A. reader.Read()
bulkCopy.WriteToServer(reader)
B. bulkCopy.DestinationTableName = "Transactions"
bulkCopy.WriteToServer(reader)
C. bulkCopy.DestinationTableName = "Transactions"
AddHandler bulkCopy.SqlRowsCopied, _
AddressOf bulkCopy_SqlRowsCopied
D. While reader.Read()
bulkCopy.WriteToServer(reader)
End While
Answer: B

Microsoft인증   070-561   070-561기출문제

NO.20 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment. (Line numbers are included for reference only.)
01 using (SqlConnection connection = new
SqlConnection(connectionString)) {
02 SqlCommand cmd = new SqlCommand(queryString, connection);
03 connection.Open();
04
05 while (sdrdr.Read()){
06 // use the data in the reader
07 }
08 }
You need to ensure that the memory is used efficiently when retrieving BLOBs from the database.
Which code segment should you insert at line 04?
A. SqlDataReader sdrdr = cmd.ExecuteReader();
B. SqlDataReader sdrdr = cmd.ExecuteReader(CommandBehavior.Default);
C. SqlDataReader sdrdr = cmd.ExecuteReader(CommandBehavior.SchemaOnly);
D. SqlDataReader sdrdr = cmd.ExecuteReader(CommandBehavior.SequentialAccess);
Answer: D

Microsoft시험문제   070-561   070-561자격증

NO.21 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
You need to ensure that the application can connect to any type of database.
What should you do?
A. Set the database driver name in the connection string of the application, and then create the
connection object in the following manner.
DbConnection connection = new OdbcConnection(connectionString);
B. Set the database provider name in the connection string of the application, and then create the
connection object in the following manner.
DbConnection connection = new OleDbConnection(connectionString);
C. Create the connection object in the following manner.
DbProviderFactory factory = DbProviderFactories.GetFactory("System.Data.Odbc");
DbConnection connection = factory.CreateConnection();
D. Create the connection object in the following manner.
DbProviderFactory factory = DbProviderFactories.GetFactory(databaseProviderName);
DbConnection connection = factory.CreateConnection();
Answer: D

Microsoft최신덤프   070-561   070-561   070-561

NO.22 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment. (Line numbers are included for reference only.)
01 Using connection As New SqlConnection(connectionString)
02 Dim cmd As New SqlCommand(queryString, connection)
03 connection.Open()
04
05 While sdrdr.Read()
06 ' use the data in the reader
07 End While
08 End Using
You need to ensure that the memory is used efficiently when retrieving BLOBs from the database.
Which code segment should you insert at line 04?
A. Dim sdrdr As SqlDataReader = _ cmd.ExecuteReader()
B. Dim sdrdr As SqlDataReader = _ cmd.ExecuteReader(CommandBehavior.[Default])
C. Dim sdrdr As SqlDataReader = _ cmd.ExecuteReader(CommandBehavior.SchemaOnly)
D. Dim sdrdr As SqlDataReader = _ cmd.ExecuteReader(CommandBehavior.SequentialAccess)
Answer: D

Microsoft인증   070-561인증   070-561최신덤프   070-561   070-561자료

NO.23 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The connection string of the application is defined in the following manner.
"Server=Prod;Database=WingtipToys;Integrated
Security=SSPI;Asynchronous Processing=true"
The application contains the following code segment. (Line numbers are included for reference only.)
01 Protected Sub UpdateData(ByVal cmd As SqlCommand)
02 cmd.Connection.Open()
03
04 lblResult.Text = "Updating ..."
05 End Sub
The cmd object takes a long time to execute.
You need to ensure that the application continues to execute while cmd is executing.
What should you do?
A. Insert the following code segment at line 03.
cmd.BeginExecuteNonQuery(New AsyncCallback( _
AddressOf UpdateComplete), cmd)
Add the following code segment.
Private Sub UpdateComplete (ByVal ar As IAsyncResult)
Dim count As Integer = CInt(ar.AsyncState)
LogResults(count)
End Sub
B. Insert the following code segment at line 03.
cmd.BeginExecuteNonQuery(New AsyncCallback( _
AddressOf UpdateComplete), cmd)
Add the following code segment.
Private Sub UpdateComplete(ByVal ar As IAsyncResult)
Dim cmd As SqlCommand = DirectCast(ar.AsyncState, SqlCommand)
Dim count As Integer = cmd.EndExecuteNonQuery(ar)
LogResults(count)
End Sub
C. Insert the following code segment at line 03.
AddHandler cmd.StatementCompleted, AddressOf UpdateComplete
cmd.ExecuteNonQuery()
Add the following code segment.
Private Sub UpdateComplete(ByVal sender As Object, _
ByVal e As StatementCompletedEventArgs)
Dim count As Integer = e.RecordCount
LogResults(count)
End Sub
D. Insert the following code segment at line 03.
Dim notification As New _
SqlNotificationRequest("UpdateComplete ", "", 10000)
cmd.Notification = notification
cmd.ExecuteNonQuery()
Add the following code segment.
Private Sub UpdateComplete (ByVal notice As SqlNotificationRequest)
Dim count As Integer = Integer.Parse(notice.UserData)
LogResults(count)
End Sub
Answer: B

Microsoft   070-561   070-561   070-561   070-561

NO.24 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
You need to ensure that the application can connect to any type of database.
What should you do?
A. Set the database driver name in the connection string of the application, and then create the
connection object in the following manner.
Dim connection As DbConnection = _ New OdbcConnection(connectionString)
B. Set the database provider name in the connection string of the application, and then create the
connection object in the following manner.
Dim connection As DbConnection = _ New OleDbConnection(connectionString)
C. Create the connection object in the following manner.
Dim factory As DbProviderFactory = _ DbProviderFactories.GetFactory("System.Data.Odbc")
Dim connection As DbConnection = _ factory.CreateConnection()
D. Create the connection object in the following manner.
Dim factory As DbProviderFactory = _ DbProviderFactories.GetFactory(databaseProviderName)
Dim connection As DbConnection = factory.CreateConnection()
Answer: D

Microsoft덤프   070-561   070-561인증   070-561

NO.25 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application has a DataTable object named OrderDetailTable. The object has the following columns:
ID
OrderID
ProductID
Quantity
LineTotal
The OrderDetailTable object is populated with data provided by a business partner. Some of the records
contain a null value in the LineTotal field and 0 in the Quantity field.
You write the following code segment. (Line numbers are included for reference only.)
01 DataColumn col = new DataColumn("UnitPrice", typeof(decimal));
02
03 OrderDetailTable.Columns.Add(col);
You need to add a DataColumn named UnitPrice to the OrderDetailTable object.
Which line of code should you insert at line 02?
A. col.Expression = "LineTotal/Quantity";
B. col.Expression = "LineTotal/ISNULL(Quantity, 1)";
C. col.Expression = "LineTotal.Value/ISNULL(Quantity.Value,1)";
D. col.Expression = "iif(Quantity > 0, LineTotal/Quantity, 0)";
Answer: D

Microsoft dump   070-561   070-561

NO.26 }
You need to compute the total number of records processed by the Select queries in the RecordCount
variable.
Which code segment should you insert at line 16?
A. myReader = myCommand.ExecuteReader();
RecordCount = myReader.RecordsAffected;
B. while (myReader.Read())
{
//Write logic to process data for the first result.
}
RecordCount = myReader.RecordsAffected;
C. while (myReader.HasRows)
{
while (myReader.Read())
{
//Write logic to process data for the second result.
RecordCount = RecordCount + 1;
myReader.NextResult();
}
}
D. while (myReader.HasRows)
{
while (myReader.Read())
{
//Write logic to process data for the second result.
RecordCount = RecordCount + 1;
}
myReader.NextResult();
}
Answer: D

Microsoft   070-561 pdf   070-561 dump   070-561
22. You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application uses Microsoft SQL Server 2005.
You write the following code segment. (Line numbers are included for reference only.)
01 Dim myConnString As String = _
02 "User ID=<username>;password=<strong password>;" + _
03 "Initial Catalog=pubs;Data Source=myServer"
04 Dim myConnection As New SqlConnection(myConnString)
05 Dim myCommand As New SqlCommand()
06 Dim myReader As DbDataReader
07 myCommand.CommandType = CommandType.Text
08 myCommand.Connection = myConnection
09 myCommand.CommandText = _
10 "Select * from Table1;Select * from Table2;"
11 Dim RecordCount As Integer = 0
12 Try
13 myConnection.Open()
14
15 Catch ex As Exception
16 Finally
17 myConnection.Close()
18 End Try
You need to compute the total number of records processed by the Select queries in the RecordCount
variable.
Which code segment should you insert at line 14?
A. myReader = myCommand.ExecuteReader()
RecordCount = myReader.RecordsAffected
B. While myReader.Read()
'Write logic to process data for the first result.
End While
RecordCount = myReader.RecordsAffected
C. While myReader.HasRows
While myReader.Read()
'Write logic to process data for the second result.
RecordCount = RecordCount + 1
myReader.NextResult()
End While
End While
D. While myReader.HasRows
While myReader.Read()
'Write logic to process data for the second result.
RecordCount = RecordCount + 1
End While
myReader.NextResult()
End While
Answer: D

Microsoft   070-561   070-561자료   070-561인증   070-561시험문제
23. You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application uses data from a Microsoft SQL Server 2005 database table. A Web page of the
application contains a GridView server control.
You write the following code segment. (Line numbers are included for reference only.)
01 private void LoadGrid()
02 {
03 using (SqlCommand command = new SqlCommand())
04 {
05 command.Connection = connection;
06 command.CommandText = "SELECT * FROM Customers";
07 connection.Open();
08
09 }
10 }
You need to retrieve the data from the database table and bind the data to the DataSource property of the
GridView server control.
Which code segment should you insert at line 08?
A. SqlDataReader rdr = command.ExecuteReader();
connection.Close();
GridView1.DataSource = rdr;
GridView1.DataBind();
B. SqlDataReader rdr = command.ExecuteReader();
GridView1.DataSource = rdr.Read();
GridView1.DataBind();
connection.Close();
C. SqlDataReader rdr = command.ExecuteReader();
Object[] values = new Object[rdr.FieldCount];
GridView1.DataSource = rdr.GetValues(values);
GridView1.DataBind();
connection.Close();
D. DataTable dt = new DataTable();
using (SqlDataReader reader = command.ExecuteReader())
{
dt.Load(reader);
}
connection.Close();
GridView1.DataSource = dt;
GridView1.DataBind();
Answer: D

Microsoft   070-561   070-561   070-561
24. You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application uses data from a Microsoft SQL Server 2005 database table. A Web page of the
application contains a GridView server control.
You write the following code segment. (Line numbers are included for reference only.)
01 Private Sub LoadGrid()
02 Using command As New SqlCommand()
03 command.Connection = connection
04 command.CommandText = "SELECT * FROM Customers"
05 connection.Open()
06
07 End Using
08 End Sub
You need to retrieve the data from the database table and bind the data to the DataSource property of the
GridView server control.
Which code segment should you insert at line 06?
A. Dim rdr As SqlDataReader = command.ExecuteReader()
connection.Close()
GridView1.DataSource = rdr
GridView1.DataBind()
B. Dim rdr As SqlDataReader = command.ExecuteReader()
GridView1.DataSource = rdr.Read()
GridView1.DataBind()
connection.Close()
C. Dim rdr As SqlDataReader = command.ExecuteReader()
Dim values As Object() = New Object(rdr.FieldCount - 1) {}
GridView1.DataSource = rdr.GetValues(values)
GridView1.DataBind()
D. Dim dt As New DataTable()
Using reader As SqlDataReader = command.ExecuteReader()
dt.Load(reader)
End Using
connection.Close()
GridView1.DataSource = dt
GridView1.DataBind()
Answer: D

Microsoft시험문제   070-561인증   070-561덤프   070-561 pdf

NO.27 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You need to separate the security-related exceptions from the other exceptions for database operations at
run time.
Which code segment should you use?
A. catch (System.Security.SecurityException ex)
{
//Handle all database security related exceptions.
}
B. catch (System.Data.SqlClient.SqlException ex)
{
for (int i = 0; i < ex.Errors.Count; i++){
if (ex.Errors[i].Class.ToString() == "14") {
//Handle all database security related exceptions.
}
else{
//Handle other exceptions
}
}
}
C. catch (System.Data.SqlClient.SqlException ex)
{
for (int i = 0; i < ex.Errors.Count; i++){
if (ex.Errors[i].Number == 14){
//Handle all database security related exceptions.
}
else{
//Handle other exceptions
}
}
}
D. catch (System.Data.SqlClient.SqlException ex)
{
for (int i = 0; i < ex.Errors.Count; i++){
if (ex.Errors[i].Message.Contains("Security")){
//Handle all database security related exceptions.
}
else{
//Handle other exceptions
}
}
}
Answer: B

Microsoft시험문제   070-561 pdf   070-561 dump

NO.28 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET.
The application contains a DataSet object named orderDS. The object contains a table named Order as
shown in the following exhibit.
The application uses a SqlDataAdapter object named daOrder to populate the Order table.
You write the following code segment. (Line numbers are included for reference only.)
01 Private Sub FillOrderTable(ByVal pageIndex As Integer)
02 Dim pageSize As Integer = 5
03
04 End Sub
You need to fill the Order table with the next set of 5 records for each increase in the pageIndex value.
Which code segment should you insert at line 03?
A. Dim sql As String = "SELECT SalesOrderID, CustomerID, " + _
"OrderDate FROM Sales.SalesOrderHeader"
daOrder.SelectCommand.CommandText = sql
daOrder.Fill(orderDS, pageIndex, pageSize, "Order")
B. Dim startRecord As Integer = (pageIndex - 1) * pageSize
Dim sql As String = "SELECT SalesOrderID, CustomerID, " + _
"OrderDate FROM Sales.SalesOrderHeader"
daOrder.SelectCommand.CommandText = sql
daOrder.Fill(orderDS, startRecord, pageSize, "Order")
C. Dim sql As String = _
String.Format("SELECT TOP {0} SalesOrderID, " + _
"CustomerID, OrderDate FROM Sales.SalesOrderHeader " + _
"WHERE SalesOrderID > {1}", pageSize, pageIndex)
daOrder.SelectCommand.CommandText = sql
daOrder.Fill(orderDS, "Order")
D. Dim startRecord As Integer = (pageIndex - 1) * pageSize
Dim sql As String = _
String.Format("SELECT TOP {0} SalesOrderID, " + _
"CustomerID, OrderDate FROM Sales.SalesOrderHeader " + _
"WHERE SalesOrderID > {1}", pageSize, startRecord)
daOrder.SelectCommand.CommandText = sql
daOrder.Fill(orderDS, "Order")
Answer: B

Microsoft   070-561 dump   070-561   070-561자료

NO.29 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
The application analyzes large amounts of transaction data that are stored in a different database.
You write the following code segment. (Line numbers are included for reference only.)
01 using (SqlConnection connection = new
SqlConnection(sourceConnectionString))
02 using (SqlConnection connection2 = new
SqlConnection(destinationConnectionString))
03 using (SqlCommand command = new SqlCommand())
04 {
05 connection.Open();
06 connection2.Open();
07 using (SqlDataReader reader = command.ExecuteReader())
08 {
09 using (SqlBulkCopy bulkCopy = new
SqlBulkCopy(connection2))
10 {
11
12 }
13 }
14 }
You need to copy the transaction data to the database of the application.
Which code segment should you insert at line 11?
A. reader.Read()
bulkCopy.WriteToServer(reader);
B. bulkCopy.DestinationTableName = "Transactions";
bulkCopy.WriteToServer(reader);
C. bulkCopy.DestinationTableName = "Transactions";
bulkCopy.SqlRowsCopied += new
SqlRowsCopiedEventHandler(bulkCopy_SqlRowsCopied);
D. while (reader.Read())
{
bulkCopy.WriteToServer(reader);
}
Answer: B

Microsoft기출문제   070-561   070-561   070-561

NO.30 You create an application by using the Microsoft .NET Framework 3.5 and Microsoft ADO.NET. The
application connects to a Microsoft SQL Server 2005 database.
You write the following code segment.
Dim query As String = _ "Select EmpNo, EmpName from dbo.Table_1; " + _ "select Name,Age from
dbo.Table_2"
Dim command As New SqlCommand(query, connection)
Dim reader As SqlDataReader = command.ExecuteReader()
You need to ensure that the application reads all the rows returned by the code segment.
Which code segment should you use?
A. While reader.NextResult()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
reader.Read()
End While
B. While reader.Read()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
reader.NextResult()
End While
C. While reader.Read()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
End While
reader.NextResult()
while reader.Read()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
End While
D. While reader.NextResult()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
End While
reader.Read()
while reader.NextResult()
Console.WriteLine([String].Format("{0}, {1}", reader(0), reader(1)))
End While
Answer: C

Microsoft자료   070-561   070-561기출문제   070-561 pdf   070-561 dump

IT인증시험덤프자료를 제공해드리는 사이트는 너무나도 많습니다. 그중에서 대부분 분들이ITExamDump제품에 많은 관심과 사랑을 주고 계시는데 그 원인은 무엇일가요?바로ITExamDump에서 제공해드리는 덤프자료 품질이 제일 좋고 업데이트가 제일 빠르고 가격이 제일 저렴하고 구매후 서비스가 제일 훌륭하다는 점에 있습니다. ITExamDump 표 Microsoft인증070-561덤프를 공부하시면 시험보는데 자신감이 생기고 시험불합격에 대한 우려도 줄어들것입니다.