Microsoft 70-536-VB 덤프데모

ITExamDump는Microsoft 70-536-VB인증시험을 아주 쉽게 패스할 수 있도록 도와드리는 사이트입니다. ITExamDump의 엘리트한 전문가가 끈임 없는 노력으로 최고의Microsoft 70-536-VB자료를 만들었습니다. 이 자료로 여러분은 100%Microsoft의70-536-VB인증시험을 패스할 수 있으며, ITExamDump을 선택함으로 성공을 선택한 것입니다. ITExamDump가 제공하는 시험가이드로 효과적인 학습으로 많은 분들이 모두 인증시험을 패스하였습니다. 이건 모두 ITExamDump 인증시험덤프로 공부하였기 때문입니다. 그 중Microsoft 70-536-VB인증시험을 패스한 분들도 모두 ITExamDump인증시험덤프를 사용하였기 때문입니다.

Microsoft인증 70-536-VB시험을 패스하는 지름길은ITExamDump에서 연구제작한 Microsoft 인증70-536-VB시험대비 덤프를 마련하여 충분한 시험준비를 하는것입니다. 덤프는 Microsoft 인증70-536-VB시험의 모든 범위가 포함되어 있어 시험적중율이 높습니다. Microsoft 인증70-536-VB시험패는 바로 눈앞에 있습니다. 링크를 클릭하시고ITExamDump의Microsoft 인증70-536-VB시험대비 덤프를 장바구니에 담고 결제마친후 덤프를 받아 공부하는것입니다.

Microsoft인증 70-536-VB시험준비중이신 분들은Microsoft인증 70-536-VB시험통과가 많이 어렵다는것을 알고 있을것입니다. 학교공부하랴,회사다니랴 자격증공부까지 하려면 너무 많은 정력과 시간이 필요할것입니다. 그렇다고 자격증공부를 포기하면 자신의 위치를 찾기가 힘들것입니다. ITExamDump 덤프는 IT인증시험을 대비하여 제작된것이므로 시험적중율이 높아 다른 시험대비공부자료보다 많이 유용하기에 IT자격증을 취득하는데 좋은 동반자가 되어드릴수 있습니다. ITExamDump 덤프를 사용해보신 분들의 시험성적을 통계한 결과 시험통과율이 거의 100%에 가깝다는 놀라운 결과를 얻었습니다.

시험 번호/코드: 70-536-VB

시험 이름: Microsoft (TS:MS.NET Framework 2.0-Application Develop Foundation)

IT업계에 종사하고 계시나요? 최근 유행하는Microsoft인증 70-536-VB IT인증시험에 도전해볼 생각은 없으신지요? IT 인증자격증 취득 의향이 있으시면 저희. ITExamDump의 Microsoft인증 70-536-VB덤프로 시험을 준비하시면 100%시험통과 가능합니다. ITExamDump의 Microsoft인증 70-536-VB덤프는 착한 가격에 고품질을 지닌 최고,최신의 버전입니다. ITExamDump덤프로 가볼가요?

70-536-VB 덤프무료샘플다운로드하기: http://www.itexamdump.com/70-536-VB.html

NO.1 You are creating an application that retrieves values from a custom section of the application
configuration file. The custom section uses XML as shown in the following block.
You need to write a code segment to define a class named Role. You need to ensure that the Role class is
initialized with values that are retrieved from the custom section of the configuration file.
Which code segment should you use?
A. Public Class Role
Inherits ConfigurationElement
Friend _ElementName As String = "name"
<ConfigurationProperty("role")> _
Public ReadOnly Property Name() As String
Get
Return CType(Me("role"), String)
End Get
End Property
End Class
B. Public Class Role
Inherits ConfigurationElement
Friend _ElementName As String = "role"
<ConfigurationProperty("name", IsRequired:=True)> _
Public ReadOnly Property Name() As String
Get
Return CType(Me("name"), String)
End Get
End Property
End Class
C. Public Class Role
Inherits ConfigurationElement
Friend _ElementName As String = "role"
Private _name As String
<ConfigurationProperty("name")> _
Public ReadOnly Property Name() As String
Get
Return _name
End Get
End Property
End Class
D. Public Class Role
Inherits ConfigurationElement
Friend _ElementName As String = "name"
Private _name As String
<ConfigurationProperty("role", IsRequired:=True)> _
Public ReadOnly Property Name() As String
Get
Return _name
End Get
End Property
End Class
Answer: B

Microsoft인증   70-536-VB   70-536-VB   70-536-VB자격증   70-536-VB자격증   70-536-VB최신덤프

NO.2 You need to create a method to clear a Queue named q.
Which code segment should you use?
A. Dim e As Object
For Each e In q
q.Dequeue()
Next
B. Dim e As Object
For Each e In q
q.Enqueue(Nothing)
Next
C. q.Clear()
D. q.Dequeue()
Answer: C

Microsoft최신덤프   70-536-VB   70-536-VB   70-536-VB자료

NO.3 You are developing an application to perform mathematical calculations. You develop a class named
CalculationValues. You write a procedure named PerformCalculation that operates on an instance of the
class.
You need to ensure that the user interface of the application continues to respond while calculations are
being performed. You need to write a code segment that calls the PerformCalculation procedure to
achieve this goal.
Which code segment should you use?
A. Private Sub PerformCalculation()
...
End Sub
Private Sub DoWork()
Dim myValues As New CalculationValues()
Dim newThread As New Thread( _
New ThreadStart(AddressOf PerformCalculation))
newThread.Start(myValues)
End Sub
B. Private Sub PerformCalculation()
...
End Sub
Private Sub DoWork()
Dim myValues As New CalculationValues()
Dim delStart As New ThreadStart( _
AddressOf PerformCalculation)
Dim newThread As New Thread(delStart)
If newThread.IsAlive Then
newThread.Start(myValues)
End If
End Sub
C. Private Sub PerformCalculation ( _
ByVal values As CalculationValues)
...
End Sub
Private Sub DoWork()
Dim myValues As New CalculationValues()
Application.DoEvents()
PerformCalculation(myValues)
Application.DoEvents()
End Sub
D. Private Sub PerformCalculation ( _
ByVal values As Object)
...
End Sub
Private Sub DoWork()
Dim myValues As New CalculationValues()
Dim newThread As New Thread( _
New ParameterizedThreadStart( _
AddressOf PerformCalculation))
newThread.Start(myValues)
End Sub
Answer: D

Microsoft기출문제   70-536-VB   70-536-VB덤프   70-536-VB   70-536-VB덤프   70-536-VB

NO.4 You are creating an application that lists processes on remote computers. The application requires a
method that performs the following tasks:
Accept the remote computer name as a string parameter named strComputer.
Return an ArrayList object that contains the names of all processes that are running on that computer.
You need to write a code segment that retrieves the name of each process that is running on the remote
computer and adds the name to the ArrayList object.
Which code segment should you use?
A. Dim al As New ArrayList()
Dim procs As Process() = _
Process.GetProcessesByName(strComputer)
Dim proc As Process
For Each proc In procs
al.Add(proc)
Next
B. Dim al As New ArrayList()
Dim procs As Process() = Process.GetProcesses(strComputer)
Dim proc As Process
For Each proc In procs
al.Add(proc)
Next
C. Dim al As New ArrayList()
Dim procs As Process() = _
Process.GetProcessesByName(strComputer)
Dim proc As Process
For Each proc In procs
al.Add(proc.ProcessName)
Next
D. Dim al As New ArrayList()
Dim procs As Process() = Process.GetProcesses(strComputer)
Dim proc As Process
For Each proc In procs
al.Add(proc.ProcessName)
Next
Answer: D

Microsoft   70-536-VB   70-536-VB인증   70-536-VB덤프   70-536-VB인증

NO.5 You are developing an application that dynamically loads assemblies from an application directory.
You need to write a code segment that loads an assembly named Assembly1.dll into the current
application domain.
Which code segment should you use?
A. Dim domain As AppDomain = AppDomain.CurrentDomain
Dim myPath As String = _
Path.Combine(domain.BaseDirectory, "Assembly1.dll")
Dim asm As [Assembly] = [Assembly].LoadFrom(myPath)
B. Dim domain As AppDomain = AppDomain.CurrentDomain
Dim myPath As String = _
Path.Combine(domain.BaseDirectory, "Assembly1.dll")
Dim asm As [Assembly] = [Assembly].Load(myPath)
C. Dim domain As AppDomain = AppDomain.CurrentDomain
Dim myPath As String = _
Path.Combine(domain.DynamicDirectory, "Assembly1.dll")
Dim asm As [Assembly] = _
AppDomain.CurrentDomain.Load(myPath)
D. Dim domain As AppDomain = AppDomain.CurrentDomain
Dim asm As [Assembly] = domain.GetData("Assembly1.dll")
Answer: A

Microsoft덤프   70-536-VB자격증   70-536-VB자격증   70-536-VB   70-536-VB기출문제   70-536-VB

NO.6 You are writing a method that returns an ArrayList named al.
You need to ensure that changes to the ArrayList are performed in a thread-safe manner.
Which code segment should you use?
A. Dim al As ArrayList = New ArrayList()
SyncLock al.SyncRoot
Return al
End SyncLock
B. Dim al As ArrayList = New ArrayList()
SyncLock al.SyncRoot.GetType()
Return al
End SyncLock
C. Dim al As ArrayList = New ArrayList()
Monitor.Enter(al)
Monitor.Exit(al)
Return al
D. Dim al As ArrayList = New ArrayList()
Dim sync_al as ArrayList = ArrayList.Synchronized(al)
Return sync_al
Answer: D

Microsoft pdf   70-536-VB   70-536-VB   70-536-VB

NO.7 You develop a service application named PollingService that periodically calls long-running
procedures. These procedures are called from the DoWork method.
You use the following service application code:
When you attempt to start the service, you receive the following error message: Could not start the
PollingService service on the local computer. Error 1053: The service did not respond to the start or
control request in a timely fashion.
You need to modify the service application code so that the service starts properly.
What should you do?
A. Move the loop code into the constructor of the service class from the OnStart method.
B. Drag a timer component onto the design surface of the service. Move the calls to the long-running
procedure from the OnStart method into the Tick event procedure of the timer, set the Enabled property of
the timer to True, and call the Start method of the timer in the OnStart method.
C. Add a class-level System.Timers.Timer variable to the service class code. Move the call to the DoWork
method into the Elapsed event procedure of the timer, set the Enabled property of the timer to True, and
call the Start method of the timer in the OnStart method.
D. Move the loop code from the OnStart method into the DoWork method.
Answer: C

Microsoft자격증   70-536-VB최신덤프   70-536-VB최신덤프   70-536-VB

NO.8 You are creating an undo buffer that stores data modifications.
You need to ensure that the undo functionality undoes the most recent data modifications first. You also
need to ensure that the undo buffer permits the storage of strings only.
Which code segment should you use?
A. Dim undoBuffer As New Stack(Of String)
B. Dim undoBuffer As New Stack()
C. Dim undoBuffer As New Queue(Of String)
D. Dim undoBuffer As New Queue()
Answer: A

Microsoft   70-536-VB덤프   70-536-VB   70-536-VB인증

NO.9 You are testing a newly developed method named PersistToDB. This method accepts a parameter of
type EventLogEntry. This method does not return a value.
You need to create a code segment that helps you to test the method. The code segment must read
entries from the application log of local computers and then pass the entries on to the PersistToDB
method. The code block must pass only events of type Error or Warning from the source MySource to the
PersistToDB method.
Which code segment should you use?
A. Dim myLog As New EventLog("Application", ".")
For Each entry As EventLogEntry In myLog.Entries
If entry.Source = "MySource" Then
PersistToDB(entry)
End If
Next
B. Dim myLog as New EventLog("Application", ".")
myLog.Source = "MySource"
For Each entry As EventLogEntry In myLog.Entries
If entry.EntryType = (EventLogEntryType.Error And _
EventLogEntryType.Warning) Then
PersistToDB(entry)
End If
Next
C. Dim myLog as New EventLog("Application", ".")
For Each entry As EventLogEntry In myLog.Entries
If entry.Source = "MySource" Then
If (entry.EntryType = EventLogEntryType.Error) Or _
(entry.EntryType = EventLogEntryType.Warning) Then
PersistToDB(entry)
End If
End If
Next
D. Dim myLog as New EventLog("Application", ".")
myLog.Source = "MySource"
For Each entry As EventLogEntry In myLog.Entries
If (entry.EntryType = EventLogEntryType.Error) Or _
(entry.EntryType = EventLogEntryType.Warning) Then
PersistToDB(entry)
End If
Next
Answer: C

Microsoft시험문제   70-536-VB기출문제   70-536-VB dump   70-536-VB pdf   70-536-VB자료

NO.10 You are working on a debug build of an application.
You need to find the line of code that caused an exception to be thrown.
Which property of the Exception class should you use to achieve this goal?
A. Data
B. Message
C. StackTrace
D. Source
Answer: C

Microsoft시험문제   70-536-VB자료   70-536-VB최신덤프   70-536-VB덤프

NO.11 You develop a service application named FileService. You deploy the service application to multiple
servers on your network.
You implement the following code segment. (Line numbers are included for reference only.)
You need to develop a routine that will start FileService if it stops. The routine must start FileService on
the server identified by the serverName input parameter.
Which two lines of code should you add to the code segment? (Each correct answer presents part of the
solution. Choose two.)
A. Insert the following line of code between lines 03 and 04:
crtl.ServiceName = serverName
B. Insert the following line of code between lines 03 and 04:
crtl.MachineName = serverName
C. Insert the following line of code between lines 03 and 04:
crtl.Site.Name = serverName
D. Insert the following line of code between lines 04 and 05:
crtl.Continue()
E. Insert the following line of code between lines 04 and 05:
crtl.Start()
F. Insert the following line of code between lines 04 and 05:
crtl.ExecuteCommand(0)
Answer: BE

Microsoft dumps   70-536-VB   70-536-VB

NO.12 You are creating a class named Age.
You need to ensure that the Age class is written such that collections of Age objects can be sorted.
Which code segment should you use?
A. Public Class Age
Public Value As Integer
Public Function CompareTo(ByVal obj As Object) As Object
If TypeOf obj Is Age Then
Dim _age As Age = CType(obj, Age)
Return Value.CompareTo(obj)
End If
Throw New ArgumentException("object not an Age")
End Function
End Class
B. Public Class Age
Public Value As Integer
Public Function CompareTo(ByVal iValue As Integer) As Object
Try
Return Value.CompareTo(iValue)
Catch
Throw New ArgumentException ("object not an Age")
End Try
End Function
End Class
C. Public Class Age
Implements IComparable
Public Value As Integer
Public Function CompareTo(ByVal obj As Object) As Integer _
Implements IComparable.CompareTo
If TypeOf obj Is Age Then
Dim _age As Age = CType(obj, Age)
Return Value.CompareTo(_age.Value)
End If
Throw New ArgumentException("object not an Age")
End Function
End Class
D. Public Class Age
Implements IComparable
Public Value As Integer
Public Function CompareTo(ByVal obj As Object) As Integer _
Implements IComparable.CompareTo
Try
Return Value.CompareTo((CType(obj, Age)).Value)
Catch
Return -1
End Try
End Function
End Class
Answer: C

Microsoft   70-536-VB   70-536-VB   70-536-VB인증

NO.13 You need to write a multicast delegate that accepts a DateTime argument.
Which code segment should you use?
A. Public Delegate Function PowerDeviceOn( _
ByVal result As Boolean, _
ByVal autoPowerOff As?DateTime) _
As Integer
B. Public Delegate Function PowerDeviceOn( _
ByVal sender As Object, _
ByVal autoPowerOff As EventArgs) _
As Boolean
C. Public Delegate Sub PowerDeviceOn( _
ByVal autoPowerOff As DateTime)
D. Public Delegate Function PowerDeviceOn( _
ByVal autoPowerOff As DateTime) _
As Boolean
Answer: C

Microsoft   70-536-VB   70-536-VB최신덤프   70-536-VB기출문제   70-536-VB dumps

NO.14 You are developing an application to assist the user in conducting electronic surveys. The survey
consists of 25 true-or-false questions.
You need to perform the following tasks:
Which storage option should you choose?
A. Dim answers As New BitVector32(1)
B. Dim answers As New BitVector32(-1)
C. Dim answers As New BitArray(1)
D. Dim answers As New BitArray(-1)
Answer: B

Microsoft   70-536-VB dumps   70-536-VB   70-536-VB

NO.15 You are creating a class to compare a specially-formatted string. The default collation comparisons do
not apply.
You need to implement the IComparable(Of String) interface.
Which code segment should you use?
A. Public Class Person
Implements IComparable(Of String)
Public Function CompareTo(ByVal other As String) As _
Integer Implements IComparable(Of String).CompareTo
...
End Function
End Class
B. Public Class Person
Implements IComparable(Of String)
Public Function CompareTo(ByVal other As Object) As _
Integer Implements IComparable(Of String).CompareTo
...
End Function
End Class
C. Public Class Person
Implements IComparable(Of String)
Public Function CompareTo(ByVal other As String) _
As Boolean Implements IComparable(Of String).CompareTo
...
End Function
End Class
D. Public Class Person
Implements IComparable(Of String)
Public Function CompareTo(ByVal other As Object) _
As Boolean Implements IComparable(Of String).CompareTo
...
End Function
End Class
Answer: A

Microsoft   70-536-VB   70-536-VB

NO.16 You need to write a code segment that will create a common language runtime (CLR) unit of isolation
within an application.
Which code segment should you use?
A. Dim mySetup As AppDomainSetup = _
AppDomain.CurrentDomain.SetupInformation
mySetup.ShadowCopyFiles = "true"
B. Dim myProcess As System.Diagnostics.Process
myProcess = New System.Diagnostics.Process()
C. Dim domain As AppDomain
domain = AppDomain.CreateDomain("MyDomain")
D. Dim myComponent As System.ComponentModel.Component
myComponent = New System.ComponentModel.Component()
Answer: C

Microsoft   70-536-VB인증   70-536-VB시험문제   70-536-VB

NO.17 You are writing a custom dictionary. The custom-dictionary class is named MyDictionary.
You need to ensure that the dictionary is type safe.
Which code segment should you use?
A. Class MyDictionary
Implements Dictionary(Of String, String)
B. Class MyDictionary
Inherits HashTable
C. Class MyDictionary
Implements IDictionary
D. Class MyDictionary
...
End Class
Dim t As New Dictionary(Of String, String)
Dim dict As MyDictionary = CType(t, MyDictionary)
Answer: A

Microsoft   70-536-VB dump   70-536-VB인증

NO.18 You create a class library that is used by applications in three departments of your company. The
library contains a Department class with the following definition.
You need to write a code segment that creates a Department object instance by using the field values
retrieved from the application configuration file.
Which code segment should you use?
A. Public Class deptElement
Inherits ConfigurationElement
Protected Overrides Sub DeserializeElement( _
ByVal reader As XmlReader, _
ByVal serializeCollectionKey As Boolean)
Dim dept As Department = New Department()
dept.name = ConfigurationManager.AppSettings("name")
dept.manager = _
ConfigurationManager.AppSettings("manager")
End Sub
End Class
B. Public Class deptElement
Inherits ConfigurationElement
Protected Overrides Sub DeserializeElement( _
ByVal reader As XmlReader, _
ByVal serializeCollectionKey As Boolean)
Dim dept As Department = New Department()
dept.name = reader.GetAttribute("name")
dept.manager = reader.GetAttribute("manager")
End Sub
End Class
C. Public Class deptHandler
Implements IConfigurationSectionHandler
Public Function Create(ByVal parent As Object, _
ByVal configContext As Object, _
ByVal section As System.Xml.XmlNode) As Object _
Implements IConfigurationSectionHandler.Create
Dim dept As Department = new Department()
dept.name = section.SelectSingleNode("name").InnerText
dept.manager = _
section.SelectSingleNode("manager").InnerText
Return dept
End Function
End Class
D. Public Class deptHandler
Implements IConfigurationSectionHandler
Public Function Create(ByVal parent As Object, _
ByVal configContext As Object, _
ByVal section As System.Xml.XmlNode) As Object _
Implements IConfigurationSectionHandler.Create
Dim dept As Department = new Department()
dept.name = section.Attributes("name").Value
dept.manager = section.Attributes("manager").Value
Return dept
End Function
End Class
Answer: C

Microsoft시험문제   70-536-VB자료   70-536-VB   70-536-VB   70-536-VB

NO.19 You are developing a custom event handler to automatically print all open documents. The event
handler helps specify the number of copies to be printed.
You need to develop a custom event arguments class to pass as a parameter to the event handler.
Which code segment should you use?
A. Public Class PrintingArgs
Private _copies As Integer
Public Sub New(ByVal numberOfCopies As Integer)
Me._copies = numberOfCopies
End Sub
Public ReadOnly Property Copies() As Integer
Get
Return Me._copies
End Get
End Property
End Class
B. Public Class PrintingArgs
Inherits EventArgs
Private _copies As Integer
Public Sub New(ByVal numberOfCopies As Integer)
Me._copies = numberOfCopies
End Sub
Public ReadOnly Property Copies() As Integer
Get
Return Me._copies
End Get
End Property
End Class
C. Public Class PrintingArgs
Private eventArgs As EventArgs
Public Sub New(ByVal args As EventArgs)
Me.eventArgs = args
End Sub
Public ReadOnly Property Args() As EventArgs
Get
Return eventArgs
End Get
End Property
End Class
D. Public Class PrintingArgs
Inherits EventArgs
Private copies As Integer
End Class
Answer: B

Microsoft dump   70-536-VB기출문제   70-536-VB   70-536-VB   70-536-VB   70-536-VB pdf

NO.20 You write the following code.
You need to create an event that will invoke FaxDocs.
Which code segment should you use?
A. Public Shared Event Fax As FaxDocs
B. Public Shared Event FaxDocs As FaxArgs
C. Public Class FaxArgs
Inherits EventArgs
Private coverPageInfo As String
Public Sub New(ByVal coverInfo As String)
Me.coverPageInfo = coverInfo
End Sub
Public ReadOnly Property CoverPageInformation As String
Get
Return Me.coverPageInfo
End Get
End Property
End Class
D. Public Class FaxArgs
Inherits EventArgs
Private coverPageInfo As String
Public ReadOnly Property CoverPageInformation As String
Get
Return Me.coverPageInfo
End Get
End Property
End Class
Answer: A

Microsoft dumps   70-536-VB   70-536-VB dumps   70-536-VB덤프   70-536-VB최신덤프

지금 사회에 능력자들은 아주 많습니다.it인재들도 더욱더 많아지고 있습니다.많은 it인사들은 모두 관연 it인증시험에 참가하여 자격증취득을 합니다.자기만의 자리를 확실히 지키고 더 높은 자리에 오르자면 필요한 스펙이니까요.70-536-VB시험은Microsoft인증의 중요한 시험이고 또 많은 it인사들은Microsoft자격증을 취득하려고 노력하고 있습니다.