ITExamDump의 제품을 구매하시면 우리는 일년무료업데이트 서비스를 제공함으로 여러분을 인증시험을 패스하게 도와줍니다. 만약 인증시험내용이 변경이 되면 우리는 바로 여러분들에게 알려드립니다.그리고 최신버전이 있다면 바로 여러분들한테 보내드립니다. ITExamDump는 한번에EMC E20-361인증시험을 패스를 보장합니다.
ITExamDump의 경험이 풍부한 전문가들이EMC E20-361인증시험관련자료들을 계획적으로 페펙트하게 만들었습니다.EMC E20-361인증시험응시에는 딱 좋은 자료들입니다. ITExamDump는 최고의 덤프만 제공합니다. 응시 전EMC E20-361인증시험덤프로 최고의 시험대비준비를 하시기 바랍니다.
우리 ITExamDump 에는 최신의EMC E20-361학습가이드가 있습니다. ITExamDump의 부지런한 IT전문가들이 자기만의 지식과 끊임없는 노력과 경험으로 최고의EMC E20-361합습자료로EMC E20-361인증시험을 응시하실 수 있습니다.EMC E20-361인증시험은 IT업계에서의 비중은 아주 큽니다. 시험신청하시는분들도 많아지고 또 많은 분들이 우리ITExamDump의EMC E20-361자료로 시험을 패스했습니다. 이미 패스한 분들의 리뷰로 우리ITExamDump의 제품의 중요함과 정확함을 증명하였습니다.
저희는 수많은 IT자격증시험에 도전해보려 하는 IT인사들께 편리를 가져다 드리기 위해 EMC E20-361실제시험 출제유형에 근거하여 가장 퍼펙트한 시험공부가이드를 출시하였습니다. 많은 사이트에서 판매하고 있는 시험자료보다 출중한ITExamDump의 EMC E20-361덤프는 실제시험의 거의 모든 문제를 적중하여 고득점으로 시험에서 한방에 패스하도록 해드립니다. EMC E20-361시험은ITExamDump제품으로 간편하게 도전해보시면 후회없을 것입니다.
시험 번호/코드: E20-361
시험 이름: EMC (Network Attached Storage (NAS) Implementation Exam)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 319 문항
업데이트: 2013-09-28
E20-361 덤프무료샘플다운로드하기: http://www.itexamdump.com/E20-361.html
NO.1 ile systems created for iSCSI LUNs should be large enough to accommodate which objects?
A.iSCSI LUNs and NFS
B.iSCSI LUNs and snaps
C.iSCSI LUNs
D.iSCSI LUNs and CIFS
Answer:B
EMC인증 E20-361 E20-361 E20-361
NO.2 You have decided to use the Automatic SavVol Extension. For a Celerra of 200 GB a SavVol with 20
GB is created.
What is the size of the next Automatic SavVol Extension when HWM is reached?
A.20 GB
B.20 MB
C.64 MB
D.64 GB
Answer:A
EMC시험문제 E20-361 E20-361인증 E20-361
NO.3 Which Celerra Data Mover file controls both the services used for name resolution and the order in
which they are used?
A.nsswitch.conf
B.nslookup.conf
C.hosts.conf
D.resolv.conf
Answer:A
EMC dumps E20-361 E20-361 dump
NO.4 A user needs to test new software with existing data stored on a Celerra file system that has
checkpoints. The Celerra administrator is asked to mount a SnapSure checkpoint from the file system to a
different Data Mover.
Can the administrator fulfill this request? Why or why not?
A.Yes, but only if the checkpoint is mounted read-only
B.Yes, but the checkpoint cannot be restored to the PFS
C.No, because the checkpoint relies on the PFS
D.No, because a writeable snap is required for testing
Answer:C
EMC E20-361인증 E20-361 dumps
NO.5 You have moved a VDM from one Data Mover to another. Now the users cannot access the data. What
could cause this condition?
A.Interface names are different to the source VDM.
B.The IP address on the target Data Mover is set before the move.
C.Target Data Mover sees all file systems of the source VDM.
D.You keep the same IP addresses.
Answer:A
EMC pdf E20-361 E20-361 dumps
NO.6 You just created a new file system and exported it as an NFS export. You are informed that someone
deleted the .etc configuration directory.
What would be the best way to prevent this in the future?
A.Remove write permission on the .etc directory.
B.Export a subdirectory of the root file system.
C.Educate users about deleting system directories.
D.Set the hidden attribute on the root directory.
Answer:B
EMC자료 E20-361 E20-361 E20-361 dump
NO.7 You are implementing a Celerra CIFS solution. When discussing the mapping method choices, the site
administrator asks you to explain the significance of the user mapping method for CIFS users.
How do you respond to the site administrator?
A.CIFS servers that join the Windows domain are assigned domain SIDs. The mapping method is used to
uniquely identify the CIFS servers in the Windows AD domain to UNIX NFS servicers in the NIS domain.
B.Celerra has a UxFS-based file system that requires UNIX style UIDs and GIDs for file and directory
permissions. Windows users and groups are identified with SIDs. The mapping method correlates UNIX
UIDs and GIDs to Windows SIDs for uniquely identifying users.
C.Celerra has a UxFS-based file system that stores UNIX style UIDs and GIDs and Windows SIDs for file
and directory permissions. The mapping method correlates the SIDs for local group permissions on the
CIFS server shares.
D.Stand-alone CIFS servers require a manual SID assignment when configured on a Celerra. When
users from the Windows domain access the Celerra the mapping method correlates the stand-alone CIFS
server SID with the Windows user SIDs.
Answer:B
EMC E20-361 E20-361 E20-361 dumps
NO.8 Which component of SnapSure identifies changed data blocks in the production file system?
A.Bitmap
B.Blockmap
C.Superblock
D.Inode
Answer:A
EMC E20-361 E20-361시험문제 E20-361
NO.9 How does the Control Station access disk partitions on the back-end storage?
A.FC
B.NBS
C.iFCP
D.iSCSI
Answer:B
EMC dump E20-361 E20-361최신덤프 E20-361
NO.10 What is the default result of joining a CIFS server to a Windows Active Directory domain?
A.The CIFS server shares are dynamically updated in DNS.
B.The CIFS server interface is dynamically assigned from Active Directory.
C.The "EMC Celerra" container is created in Active Directory.
D.The CIFS server is added to the Active Directory Computers container.
Answer:C
EMC인증 E20-361 E20-361최신덤프
NO.11 Which describes how a Usermapper client resolves a Windows SID to UNIX UID/GID?
A.Uses the resolution order defined in the Data Mover nsswitch.conf file
B.Broadcasts over the internal Celerra network for secmap cache on server_2
C.Uses the ntxmap.conf file first, then the Data Mover secmap cache
D.Broadcasts over the internal Celerra network for a primary or secondary Usermapper service
Answer:D
EMC시험문제 E20-361 E20-361 E20-361 E20-361자료
NO.12 The storage administrator would like to know if more AV servers are necessary for optimal
performance and protection.
Which tool can the system administrator use to analyze current utilization of the antivirus environment?
A.CAVA Calculator
B.NAS Support Matrix
C.CAVA Sizing Tool
D.Celerra Monitor
Answer:C
EMC E20-361자료 E20-361 E20-361 E20-361 pdf
NO.13 File systems created for iSCSI LUNs should be large enough to accommodate which objects?
A.iSCSI LUNs and NFS
B.iSCSI LUNs and snaps
C.iSCSI LUNs and CIFS
D.iSCSI LUNs
Answer:B
EMC E20-361기출문제 E20-361 E20-361 E20-361
NO.14 An administrator wants to present several CIFS shares to users through one file server. The shares are
stored on many physical machines. What can be used with the Celerra to achieve this goal?
A.Celerra global CIFS server
B.Default CIFS server
C.Distributed File System
D.Virtual Data Mover
Answer:C
EMC덤프 E20-361최신덤프 E20-361 E20-361자격증 E20-361인증
NO.15 How is Kerberos used within the Active Directory?
A.For user authentication
B.Provides encryption of stored user passwords
C.For time synchronization
D.Provides Dynamic DNS updates
Answer:A
EMC기출문제 E20-361기출문제 E20-361 E20-361 E20-361기출문제
NO.16 What application provides integration between the Celerra and the iSCSI host for replicating an iSCSI
LUN?
A.Replication Manager
B.Unisphere Manager
C.Navisphere Manager
D.Celerra Manager
Answer:D
EMC최신덤프 E20-361기출문제 E20-361 dump
NO.17 You are implementing a CIFS solution and will possibly be using Virtual Data Movers. Which CIFS
dynamic configuration information is contained within the Virtual Data Mover?
A.Virus checker configuration
B.CIFS startup configuration
C.DFS root ID information
D.Share information
Answer:D
EMC자료 E20-361 E20-361 E20-361 dump E20-361
NO.18 Which Celerra feature stores Windows SIDs correlated to UIDs and GIDs?
A.ntxmap
B.NASDB
C.secmap
D.SavVol
Answer:C
EMC자격증 E20-361자료 E20-361자격증 E20-361인증 E20-361최신덤프 E20-361자료
NO.19 A Celerra file system has a SnapSure schedule enabled for daily checkpoints. By using the Microsoft
Shadow Copy Client, a user can see previous versions of a certain file up to a certain date in the past, but
nothing else after that.
What could be the cause of this issue?
A.Checkpoints are currently being used by an application.
B.All of the checkpoints have been refreshed.
C.There have been no changes to the file.
D.The SavVol has reached a full state.
Answer:D
EMC dumps E20-361 E20-361
NO.20 Which statement describes Celerra gateway Fibre Channel connectivity between the blades and the
back-end storage?
A.CLARiiON back-end storage can only be connected to blades via direct connection.
B.Symmetrix back-end storage can only be connected to blades via direct
C.Symmetrix back-end storage can only be connected to blades via switched fabric.
D.CLARiiON back-end storage can only be connected to blades via switched fabric.
Answer:C
EMC자료 E20-361 E20-361자료 E20-361
ITexamdump의 700-505덤프의 VCE테스트프로그램과 MB3-700덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 HP5-K01D시험에 대비한 고품질 덤프와 70-332시험 최신버전덤프를 제공해드립니다. 최고품질 FCNSA.v5시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기