ITExamDump에서 출시한 IBM 인증 000-027시험덤프는ITExamDump의 엘리트한 IT전문가들이 IT인증실제시험문제를 연구하여 제작한 최신버전 덤프입니다. 덤프는 실제시험의 모든 범위를 커버하고 있어 시험통과율이 거의 100%에 달합니다. 제일 빠른 시간내에 덤프에 있는 문제만 잘 이해하고 기억하신다면 시험패스는 문제없습니다.
인재가 넘치는 IT업계에서 자기의 자리를 지켜나가려면 학력보다 능력이 더욱 중요합니다.고객님의 능력을 증명해주는 수단은 국제적으로 승인받은 IT인증자격증이 아니겠습니까? IBM인증 000-027시험이 어렵다고 하여 두려워 하지 마세요. IT자격증을 취득하려는 분들의 곁에는ITExamDump가 있습니다. ITExamDump의IBM인증 000-027시험준비를 하시고 시험패스하여 자격증을 취득하세요. 국제승인 자격증이라 고객님의 경쟁율을 업그레이드 시켜드립니다.
시험 번호/코드: 000-027
시험 이름: IBM (IBM Maximo Asset Management V6.2 Implementation )
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 137 문항
업데이트: 2013-12-29
수많은IBM인증 000-027시험공부자료중에서ITExamDump의IBM인증 000-027덤프가 가장 출중한 원인은 무엇일가요? ITExamDump의IBM인증 000-027덤프는 실제시험문제의 출제방향을 연구하여 IT전문가로 되어있는 덤프제작팀이 만든 최신버전 덤프입니다. ITExamDump의IBM인증 000-027덤프가 있으면 힘든IBM인증 000-027시험이 쉬어져서 자격증을 제일 빠른 시간내에 취득할수 있습니다.제일 어려운 시험을 제일 간단한 방법으로 패스하는 방법은ITExamDump의IBM인증 000-027덤프로 시험준비 공부를 하는것입니다.
IBM 인증 000-027시험대비덤프를 찾고 계시다면ITExamDump가 제일 좋은 선택입니다.저희ITExamDump에서는 여라가지 IT자격증시험에 대비하여 모든 과목의 시험대비 자료를 발췌하였습니다. ITExamDump에서 시험대비덤프자료를 구입하시면 시험불합격시 덤프비용환불신청이 가능하고 덤프 1년 무료 업데이트서비스도 가능합니다. ITExamDump를 선택하시면 후회하지 않을것입니다.
ITExamDump의 IBM인증 000-027시험덤프는 실제시험의 기출문제와 예상문제를 묶어둔 공부자료로서 시험문제커버율이 상당히 높습니다.IT업계에 계속 종사하려는 IT인사들은 부단히 유력한 자격증을 취득하고 자신의 자리를 보존해야 합니다. ITExamDump의 IBM인증 000-027시험덤프로 어려운 IBM인증 000-027시험을 쉽게 패스해보세요. IT자격증 취득이 여느때보다 여느일보다 쉬워져 자격증을 많이 따는 꿈을 실현해드립니다.
우선 우리ITExamDump 사이트에서IBM 000-027관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다.체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump에서 제공하는IBM 000-027덤프로 시험 준비하시면 편안하게 시험을 패스하실 수 있습니다.
ITExamDump의 경험이 풍부한 전문가들이IBM 000-027인증시험관련자료들을 계획적으로 페펙트하게 만들었습니다.IBM 000-027인증시험응시에는 딱 좋은 자료들입니다. ITExamDump는 최고의 덤프만 제공합니다. 응시 전IBM 000-027인증시험덤프로 최고의 시험대비준비를 하시기 바랍니다.
000-027 덤프무료샘플다운로드하기: http://www.itexamdump.com/000-027.html
NO.1 Where are the receipt of Services and Materials processed in IBM Maximo Asset Management V6.2
(IMAM)?
A. The Receipt of Services and Materials are processed in the Receiving application.
B. Services are rendered and Materials are received in the Purchase Order application.
C. Receipts of Services and Materials are systematically processed in IMAM transitionally.
D. Services are rendered and Materials are received using the Issues and Transfer application.
Answer: A
IBM 000-027인증 000-027 000-027
NO.2 At which level do Commodity Codes exist within IBM Maximo Asset Management V6.2?
A. Set level
B. Site level
C. System level
D. Organization level
Answer: A
IBM 000-027 000-027
NO.3 Through which action are Currency Codes created?
A. select New Row in Currency Codes application
B. select Action Currency Codes in the Database Configuration application
C. select an Organization in the Currency Codes application and add a new row
D. select the Base Currency lookup in the Organizations application and add a new row
Answer: A
IBM 000-027 000-027기출문제 000-027자격증 000-027
NO.4 What must be done in order to automatically close the purchase requisition (PR) after one or more
purchase orders (PO) have been created?
A. All PR lines must be assigned to a PO.
B. The PR must be in the Approved status.
C. The PR must enter the workflow process.
D. All manual company input fields must be completed.
Answer: A
IBM 000-027 000-027자격증 000-027 pdf
NO.5 What should be done to add lines from a Purchase Request (PR) to a Requests for Quotation (RFQ)?
A. Hyperlink to the PR tab and add each line.
B. Go to the Vendors tab in the RFQ application and click Create PO.
C. Go to the Quotation tab in the RFQ application and select RFQ lines.
D. Select Action in the RFQ application and click Copy PR line item to RFQ.
Answer: D
IBM 000-027자격증 000-027
NO.6 Which menu option must be used to grant a user the authority to add or remove users to one or more
Security Groups?
A. Security Controls
B. Database Access
C. Set Security Profile
D. Authorize Group Reassignment
Answer: D
IBM dump 000-027시험문제 000-027덤프
NO.7 Based on which two conditions can master Preventive Maintenance (PM) schedules be created?
(Choose two.)
A. elapsed time since the target start date or completion date of previous work generated by PM
B. difference between completion date of previous work and system date is equal to Lead Time
C. elapsed time since the target start date or completion date of the latest work orders for the asset
D. metered equipment usage since the target start date or completion date of previous work generated by
PM
E. metered equipment usage since the target start date or completion date of the latest work order for the
asset
Answer: AD
IBM시험문제 000-027 000-027
NO.8 With which level in IBM Maximo Asset Management V6.2 are Purchase Contracts associated?
A. Set Level
B. System Level
C. Database Level
D. Organization Level
Answer: D
IBM 000-027최신덤프 000-027
NO.9 What must be created before populating the Tools application?
A. Item Sets
B. Item Master Owner
C. Vendors for the Items
D. Storeroom assignment
Answer: A
IBM 000-027 000-027
NO.10 Which statement is true about item records and inventory management?
A. With IBM Maximo Asset Management V6.2 (IMAM), item records are created in the Item Master
application, and storeroom records are created in the Storerooms application, but inventory is
managed in the Inventory application.
B. With IMAM, item records are created in the Storerooms application, and storeroom records are created
in the Inventory application, but inventory is managed in the Inventory application.
C. With IMAM, item records are created in the Inventory application, and storeroom records are created in
the Item Master application, and inventory is managed in the Item Master application.
D. With IMAM, item records are created in the Inventory application, and storeroom records are created in
the Storerooms application, but inventory is managed in the Item Master application.
Answer: A
IBM인증 000-027 000-027 000-027인증
NO.11 What should be done if a company decides to stop doing business with a vendor?
A. Notify buyers using Workflow.
B. Delete the Company Master record.
C. Set the Company record status to DISQUAL.
D. Check the Disqualified Vendor check box on the Company record.
Answer: D
IBM 000-027 000-027 000-027
NO.12 In a routing type workflow process, on which nodes does IBM Maximo Asset Management V6.2 use the
information specified to deliver the record to individuals?
A. Condition and Task
B. Manual Input and Task
C. Interaction and Manual Input
D. Manual Input and Subprocess
Answer: B
IBM시험문제 000-027 000-027 000-027
NO.13 Can an item balance ever be allowed to be negative?
A. never
B. always
C. depends on which item
D. depends on if it is allowed in the Inventory Default settings
Answer: D
IBM 000-027덤프 000-027
NO.14 Which two applications can be used to view actual costs for labor, materials, services, and tools?
(Choose two.)
A. Labor Reporting
B. Quick Reporting
C. Work Order Tracking
D. Assignment Manager
E. Work Order Management
Answer: BC
IBM 000-027 dump 000-027 dumps 000-027자격증 000-027 000-027자료
NO.15 Company XYZ receives an invoice from one of its vendors. How is this processed in IBM Maximo
Asset Management V6.2 (IMAM)?
A. When an invoice is received by the company, the user will access the Invoices application, enter the
receipt information, approve, and then route to Accounts Payable.
B. All invoices are routed by IMAM to the Accounts Payable department for matching against existing
purchase requisitions (PR). Once the PR is confirmed with the proper approvals, the
Accounts Payable department will process payment.
C. When an invoice is received by company XYZ, the user will access the Invoices application, enter the
Vendors Invoice information by creating a new record, match the Vendor Invoice to the
Purchase Order (PO), approve, and then route to Accounts Payable.
D. When an invoice is received by the company XYZ, the user will go to the PO application, access the
PO Line tab, and insure that the receipt box has a Y. If the Y is showed, the invoice will be
closed, but if the Y is missing, the invoice will be routed back to the vendor for verification.
Answer: C
IBM 000-027 000-027
NO.16 What is the use of work assets on safety plans?
A. The work asset determines to which assets and locations a safety plan can be applied.
B. Only safety plans with associated work assets can be used in combination with job plans.
C. The safety plan can only be applied to work orders with the same asset or location associated.
D. The work assets combined with the work on a job plan dictate which safety information is required.
Answer: D
IBM 000-027 000-027
NO.17 Other than through the Purchase Orders application, how can Purchase Orders be created in IBM
Maximo Asset Management V6.2?
A. from an approved Lease, Rental, Master, or Purchase contract
B. from a Purchase Requisitions Create PO action, create the approved Purchase Order
C. from a Purchase Requisition, a Request for Quotation, a Master Contract, or a reorder process
D. from a Purchase Requisition, a Request for Quotation, a Purchase Contract, or a reorder process
Answer: D
IBM 000-027자료 000-027 000-027 000-027기출문제
NO.18 In IBM Maximo Asset Management V6.2, what does the Purchase Orders applications Distribute
Costs action do?
A. Distribute the line item cost among all lines.
B. Distribute the line item cost among all direct issue lines.
C. Distribute the line item cost among multiple GL accounts.
D. Distribute the purchase order cost among multiple GL accounts.
Answer: C
IBM기출문제 000-027 000-027최신덤프 000-027인증 000-027 dump
NO.19 How can Service Items be reordered?
A. The IBM Maximo Asset Management V6.2 (IMAM) administrator can use the Reorder Items action in
the Inventory application to reorder all the Service Items required.
B. The IMAM administrator can create a purchase order (PO) for all the Service Items required and use
the Issue on Receipt check box for PO Lines related to Service Items.
C. The IMAM administrator can use the Reorder Direct Issue Items and Services action in the Service
Item application to reorder all items or services and are issued without being received into
inventory.
D. The IMAM administrator can use the Reorder Direct Issue Items and Services action in the Service
Item application to reorder items or services that are listed on approved work orders and
are issued without being received into inventory.
Answer: D
IBM 000-027 pdf 000-027 dumps 000-027 pdf
NO.20 Which statement is true about items that have been assembled into a kit?
A. Only rotating items can be part of a kit.
B. Kits can be assembled from lotted items.
C. Kits can be assembled from items in different storerooms.
D. Items that have been assembled into kits do not appear in item balances.
Answer: D
IBM 000-027자료 000-027 000-027기출문제 000-027
NO.21 What is the maximum value (as a percentage of total cost) that an item identified as condition-coded
can have?
A. 25%
B. 50%
C. 75%
D. 100%
Answer: D
IBM인증 000-027 000-027 000-027 000-027
NO.22 What must be assigned to establish an asset as Rotating?
A. Spare parts
B. Rotating Item
C. Classification
D. Operating Location
Answer: B
IBM 000-027시험문제 000-027자료 000-027 000-027
NO.23 A work order has been created to perform corrective maintenance on a defective generator. All
required information has been provided in the work order, but required materials are not in stock and
have to be ordered. What is the status of the work order, after a maintenance manager has approved the
work order?
A. Approved (APPR)
B. Waiting on Materials (WMATL)
C. Waiting to be Scheduled (WSCH)
D. Waiting on Plant Condition (WPCOND)
Answer: B
IBM 000-027 000-027 000-027 000-027
NO.24 The IBM Maximo Asset Management V6.2 administrator creates a new Start Center with updated Key
Performance Indicators. Which application must be used to associate the Start Center to users?
A. Users
B. People
C. Organizations
D. Security Groups
Answer: D
IBM 000-027 000-027 pdf 000-027최신덤프
NO.25 What is used to execute a task at a particular time against any application on a user-defined schedule
with user-defined parameters?
A. Sets
B. Workflow
C. Cron Task
D. Notification
Answer: C
IBM dump 000-027자격증 000-027 000-027
NO.26 Which status will prevent an invoice from being cancelled?
A. Hold
B. Entered
C. Approved
D. Waiting for Approval
Answer: C
IBM 000-027 000-027 dump 000-027 dump
NO.27 Which two applications can be used by a user to report emergency work, if the user at least wants to
report downtime, classify the request, and report actuals? (Choose two.)
A. Job Plan
B. Quick Reporting
C. Labor Reporting
D. Work Order Tracking
E. Assignment Manager
Answer: BD
IBM최신덤프 000-027 dump 000-027인증 000-027
NO.28 What does the ABC designation include for inventory items?
A. Quantity reserved in stock
B. Quantity expired for a particular Lot
C. Count Frequency in number of days
D. Activity Based Costing in capital dollars
Answer: C
IBM dumps 000-027 000-027 dump 000-027
NO.29 In order to use the item records at the site level, to what must the item be added?
A. Asset
B. Location
C. Storeroom
D. Rotating Asset
Answer: C
IBM 000-027 000-027
NO.30 The Client has requested that once Terms and Conditions (Ts Cs) are attached to another record, the
Ts Cs should be unchangeable. How is this appropriately accomplished?
A. In the Contracts application, delete the Ts Cs from the record and enter a new row.
B. In the application using the specific Ts Cs, rename the Ts Cs and approve the record.
C. In the Terms and Conditions Application, uncheck the Editable box on the newly created term.
D. In the Terms and Conditions Application, change the status of the newly created term to Approved.
Answer: C
IBM덤프 000-027최신덤프 000-027
ITexamdump의 VCAW510덤프의 VCE테스트프로그램과 VCP510-DT덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 650-304시험에 대비한 고품질 덤프와 000-303시험 최신버전덤프를 제공해드립니다. 최고품질 JN0-533시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기