여러분은 아직도EMC E20-818인증시험의 난이도에 대하여 고민 중입니까? 아직도EMC E20-818시험 때문에 밤잠도 제대로 이루지 못하면서 시험공부를 하고 있습니까? 빨리빨리ITExamDump를 선택하여 주세요. 그럼 빠른 시일내에 많은 공을 들이지 않고 여러분으 꿈을 이룰수 있습니다.
ITExamDump는 여러분의 꿈을 이루어줄 뿐만 아니라 일년무료 업뎃서비스도 따릅니다. ITExamDump에서 제공하는 덤프로 여러분은 1000%시험을 패스하실수 있고EMC E20-818자격증을 취득하실 수 있습니다.지금 바로 사이트에서EMC E20-818덤프데모 즉 덤프의 일부 문제와 답을 다운 받으셔서 체험하실 수 있습니다.
시험 번호/코드: E20-818
시험 이름: EMC (Symmetrix Solutions Expert Exam for Implementation Engineers)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 161 문항
업데이트: 2014-03-03
요즘 같은 인재가 많아지는 사회에도 많은 업계에서는 아직도 관련인재가 부족하다고 합니다.it업계에서도 이러한 상황입니다.EMC E20-818시험은 it인증을 받을 수 있는 좋은 시험입니다. 그리고ITExamDump는EMC E20-818덤프를 제공하는 사이트입니다.
요즘같이 시간인즉 금이라는 시대에, 우리 ITExamDump선택으로EMC E20-818인증시험응시는 아주 좋은 딜입니다. 우리는 100%시험패스를 보장하고 또 일년무료 업데이트서비스를 제공합니다. 그리고 시험에서 떨어지셨다고 하시면 우리는 덤프비용전액 환불을 약속 드립니다.
비스를 제공해드려 아무런 걱정없이 시험에 도전하도록 힘이 되어드립니다. ITExamDump덤프를 사용하여 시험에서 통과하신 분이 전해주신 희소식이 ITExamDump 덤프품질을 증명해드립니다.
EMC인증 E20-818시험은 등록하였는데 시험준비는 아직이라구요? EMC인증 E20-818시험일이 다가오고 있는데 공부를 하지 않아 두려워 하고 계시는 분들은 이 글을 보는 순간 시험패스에 자신을 가지게 될것입니다. 시험준비 시간이 적다고 하여 패스할수 없는건 아닙니다. ITExamDump의EMC인증 E20-818덤프와의 근사한 만남이EMC인증 E20-818패스에 화이팅을 불러드립니다. 덤프에 있는 문제만 공부하면 되기에 시험일이 며칠뒤라도 시험패스는 문제없습니다. 더는 공부하지 않은 자신을 원망하지 마시고 결단성있게ITExamDump의EMC인증 E20-818덤프로 시험패스에 고고싱하세요.
E20-818 덤프무료샘플다운로드하기: http://www.itexamdump.com/E20-818.html
NO.1 A customer is running Concurrent SRDF/Star. The disaster recovery (DR) plan allows for the workload
to be switched to either the synchronous site or the asynchronous site. In addition, part of their DR plan is
to enable SRDF/Star protection once the workload site comes back online.
Which advice should be given to the customer?
A.If production fails over to the synchronous site, it is possible to run in a Star-protected configuration after
the return of the original workload site.
B.If production fails over to either the asynchronous site or synchronous site, it is not possible to run in a
Star-protected configuration from either site after the return of the original workload site.
C.If production fails over to either the asynchronous site or synchronous site, it is possible to run in a
Star-protected configuration from either site after the return of the original workload site.
D.If production fails over to the asynchronous site, it is possible to run in a Star-protected configuration
after the return of the original workload site.
Answer:A
EMC E20-818 E20-818 E20-818
NO.2 A customer wants to provide remote disaster recovery (DR) for several critical mailbox servers in their
Microsoft Exchange Server 2007 environment. Local recoverability is provided by creating replicas of their
critical databases.
The customer's DR site is located 20 km away. They have already provisioned the necessary failover host
on the DR site, as well as the required Active Directory infrastructure needed to support a failover.
However, they want to minimize the total number of database copies required to provide basic failover
capabilities for the Exchange server.
Which solution would you recommend to provide remote point-of-failure recovery with the fewest local
and remote database copies?
A.R1-R2-BCV
B.Mixed Mirroring
C.STD-R1BCV-R2-BRBCV
D.STD-R1BCV-R2
Answer:A
EMC기출문제 E20-818최신덤프 E20-818자격증 E20-818시험문제
NO.3 A customer wants to use TimeFinder/Exchange Integration Module (TF/EIM) to create daily local
replicas of a critical Microsoft Exchange 2007 mailbox server. Using Terminal Services, they connect
remotely to the backup server and execute the following command:
exbackup2007 -v -vss -s [servername\] -preestablish
The command runs up until the point where TF/EIM attempts to mount the volumes, then it fails. Why is
the process unable to complete?
A.Exbackup is not supported using a terminal session
B.Correct VSS Provider was not installed
C."copyonly" switch must be specified the first time a backup is run
D.Exbackup does not have the permissions needed to run on the backup host
Answer:A
EMC E20-818 E20-818
NO.4 A customer has three data centers that are used to run SRDF/AR multi-hop on Symmetrix DMX-4
arrays.
Production is located at Site A
Secondary site is located at Site B
Tertiary site is located at Site C
In the event of a Site A failure, the customer wants to be able to fail over to Site C while retaining the
ability to have remote data protection. Which solution will offer the best RPO and RTO for this customer?
A.Cascaded SRDF
B.Latest version of SRDF/AR
C.Concurrent SRDF
D.SRDF/EDP
Answer:A
EMC E20-818 E20-818 E20-818 E20-818
NO.5 A new Cascaded SRDF customer is running in SRDF/A mode from the source (R1) site to the
disk-based secondary (R21) site. In this scenario, which SRDF mode is permitted between the R21 and
the R2 sites?
A.Adaptive Copy Disk
B.Adaptive Copy Write Pending
C.Synchronous
D.Asynchronous
Answer:A
EMC dumps E20-818덤프 E20-818
NO.6 A customer has been creating replicas of several Microsoft Exchange mailbox servers using Replication
Manager. They have recently added a new Exchange Server 2007 mailbox host to the environment.
In addition, the customer has created a scheduled job to create replicas of five storage groups in
consecutive order. Since doing so, they notice that the newly added replica jobs seem to take a very long
time to complete.
What is the source of the problem?
A.NTFS volumes containing the databases were not formatted with the correct cluster size
B.Replication Manager job should have been configured to create the replicas simultaneously
C.Latest Replication Manager Client Service Pack was not installed on the Exchange server
D.Exchange management utilities were not installed on the Replication Manager mount host
Answer:A
EMC dumps E20-818 E20-818 E20-818
NO.7 A customer is planning an SRDF/Star configuration as shown in the exhibit. The customer wants to
switch production to the synchronous target in the event of a workload site fault.
In addition to the Base and SRDF Solutions Enabler licenses, which licenses are recommended at the
synchronous target?
A.TimeFinder/Clone and TimeFinder/CG
B.TimeFinder/Mirror and TimeFinder/Clone
C.TimeFinder/Snap and TimeFinder/CG
D.TimeFinder/Snap and TimeFinder/Mirror
Answer:A
EMC E20-818인증 E20-818 E20-818
NO.8 A customer is migrating their Microsoft Exchange 2007 server from a NAS back end to a new
Symmetrix V-Max SE array. As illustrated in the exhibit, perfmon was used to create a log view of an
average day's activity against the database LUN of the busiest datastore in the Exchange environment.
This will serve as the performance benchmark for all other database LUNs. There are an additional four
mailbox databases on this server.
How many RAID 1-protected 15k rpm spindles are required to satisfy the performance needs of the
customer for all the mailbox databases on this server?
A.10
B.26
C.38
D.50
Answer:D
EMC E20-818기출문제 E20-818자격증 E20-818자료 E20-818자격증 E20-818
NO.9 An Microsoft Exchange administrator has recently encountered an issue with one of the databases in
their Exchange 2007 environment. The decision was made to perform a partial restore of only the single
database.
Based on EMC and Microsoft best practice, what are the proper ordered steps needed to complete this
task?
A.1) Dismount all databases in the storage group. 2) Restore the database replica. 3) Remove the .chk
file from the system path folder. 4) Remount all databases in the storage group.
B.1) Remove the .chk file from the system path folder. 2) Dismount all databases in the storage group. 3)
Restore the database replica. 4) Remount all databases in the storage group.
C.1) Dismount all databases in the storage group. 2) Remove the .chk file from the system path folder. 3)
Restore the database replica. 4) Remount all databases in the storage group.
D.1) Dismount all databases in the storage group. 2) Remove the .chk file from the system path folder. 3)
Remount all databases in the storage group. 4) Restore the database replica.
Answer:A
EMC시험문제 E20-818 E20-818시험문제 E20-818
NO.10 A customer's SQL database has been experiencing performance degradation every time a particular
query is run. When designing the storage layout, all user databases were properly sized according to
EMC best practices.
Which storage configuration could be the source of the problem?
A.Tempdb and user databases are sharing spindles
B.MDF and LDF files are not sharing spindles
C.RAID 5 protection has been used for Tempdb
D.Data files are spread over striped metavolumes
Answer:A
EMC덤프 E20-818 E20-818자격증 E20-818기출문제
NO.11 A composite group spanning two Symmetrix arrays is set up to run SRDF/Star using Cascaded SRDF
as illustrated in the exhibit. What is one of the necessary conditions before the SRDF daemon at Site A
will perform an MSC cycle switch?
A.Transmit delta sets from Site B to Site C have finished
B.SDDF bitmaps have been swapped at Site A
C.Invalid track count between Sites A and C is less than 30000
D.SYMCLI_STAR_ALLOW_CASCADED_CONFIGURATION option must be enabled in the option file
Answer:A
EMC E20-818 E20-818자료 E20-818
NO.12 A Microsoft SQL Server database administrator wants to execute backups using Solutions Enabler SRM
functionality. Which ODBC variable(s) needs to be set to enable the symioctl and symrdb command set?
A.SYMCLI_RDB "CONNECT" and "TYPE" environment variables
B.SYMCLI_RDB "NAME" and "TYPE" environment variables
C.Only the SYMCLI_RDB "Connect" to the database "username/password"
D.Only the SYMCLI_RDB "TYPE" variable to "sqlserver"
Answer:A
EMC최신덤프 E20-818 E20-818 E20-818 dump
NO.13 Refer to the Exhibit.You have been asked to configure a Cascaded SRDF solution at a customer site.
The production site will be at Site A, the synchronous target will be at Site B, and the asynchronous target
at Site C.
Which kind of RDF devices will be needed at each site?
A.R1 at Site A, R21 at Site B, and R2 at Site C
B.R11 at Site A, R21 at Site B, and R22 at Site C
C.R11 at Site A, R21 at Site B, and R2 at Site C
D.R1 at Site A, R2 at Site B, and R21 at Site C
Answer:A
EMC E20-818기출문제 E20-818최신덤프 E20-818최신덤프
NO.14 Click the Calculator icon in the upper left-hand corner.
A customer is migrating their SQL server from a NAS back end to a new RAID 1-protected Symmetrix
V-Max SE array. Perfmon was used to create a log view of an average day's activity against the database
LUN as represented in the exhibit. Unfortunately the database's data file and transaction log are located
on the same LUN. The database administrator has informed you that this database typically processes 25
GB worth of transactions over the course of their 12-hour business day.
Which discount in IOPS should be taken before determining the number of spindles required for the data
file LUN?
A.75
B.152
C.176
D.365
Answer:A
EMC E20-818시험문제 E20-818
NO.15 As reflected in the exhibit, a customer has a Cascaded SRDF/Star environment. Site B fails and they
undertake a reconfiguration to provide remote data protection between Sites A and C.
What is used to determine the invalid tracks that must be moved from Site A to Site C?
A.Inclusive OR of two SDDF bitmaps at Site A
B.Inclusive OR of two SDDF bitmaps at Site A and a bitmap at Site C
C.Inclusive OR of two SDDF bitmaps at Site B
D.Inclusive OR of two SDDF bitmaps at Site C
Answer:A
EMC dumps E20-818 E20-818
NO.16 Group Name Services (GNS) is enabled in an SRDF/Star solution. What is a benefit of GNS in a
SRDF/Star environment?
A.Facilitates management of SRDF/Star when there are multiple management hosts at each location
B.Distributes the Star internal definition file to the Symmetrix arrays at both target locations
C.Propagates the composite group definitions over SRDF links
D.Restarts the SRDF daemon in the event it stops unexpectedly
Answer:A
EMC E20-818자료 E20-818최신덤프 E20-818
NO.17 An SRDF/Star solution has been proposed. The customer is slow to accept the solution because they
are concerned about the reliability of the RDF daemon.
How would you address the customer's concern?
A.RDF daemons will be deployed on multiple management stations at the workload site. The RDF
daemons will cooperate with each other.
B.RDF daemon process runs on the Symmetrix array and has built-in redundancy.
C.RDF daemon process runs on the Symmetrix array. If the workload site RDF daemon fails, the RDF
daemon from one of the other sites will take over.
D.RDF daemons will be deployed on one management station at each of the three sites. If the workload
site RDF daemon fails, one of the RDF daemons from the other two sites will take over.
Answer:A
EMC pdf E20-818 dumps E20-818 pdf
NO.18 In the event of a physical disk spindle failure, how would a customer with Microsoft SQL Server
maximize availability?
A.Logs should be on RAID 1 volumes with data volumes on separate RAID 6 volumes
B.Logs should be on RAID 1 volumes with data volumes on separate RAID 5 volumes
C.Logs and data files should be on separate RAID 5 volumes
D.Logs and data files should be on separate RAID 1-protected volumes
Answer:A
EMC E20-818 E20-818 pdf E20-818
NO.19 A customer has implemented Microsoft Exchange Server 2007 in an SRDF environment with replicas
being taken at the disaster recovery (DR) site. During testing of this solution, they have failed over
Exchange operations to the DR site. The Exchange mailbox server appears to come online, but user
mailboxes are inaccessible. The Exchange Management Console shows all mailboxes marked with a
small red "x" over the mailbox icons.
Which course of action will resolve this issue?
A.Ensure the Exchange mailbox server at the DR site can communicate with an Active Directory Domain
Controller
B.Recover the database from the BCV copies available at the DR site
C.Ensure that the World Wide Web service on the Exchange server at the DR site has started
successfully
D.Recover the database from the remote BCV copies available at the primary site
Answer:A
EMC E20-818 E20-818 E20-818
NO.20 A customer wants to use Replication Manager to replicate and mount, at the file group level, a Microsoft
SQL Server database. What must be done before creating a Replication Manager file group replication
job?
A.Ensure no other data files are on the same volume with the selected file group
B.Copy the log files along with the file group data files
C.Use the recover database option when mounting a file group
D.Create a TimeFinder device group that contains only the file group data files
Answer:A
EMC자격증 E20-818 dump E20-818 pdf E20-818
ITexamdump의 300-208덤프의 VCE테스트프로그램과 156-315.13덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 1Z0-536시험에 대비한 고품질 덤프와 BCP-340시험 최신버전덤프를 제공해드립니다. 최고품질 70-331시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기