ITExamDump의 HP인증 HP0-Y16덤프를 구매하시면 1년동안 무료 업데이트서비스버전을 받을수 있습니다. 시험문제가 변경되면 업데이트 하도록 최선을 다하기에ITExamDump의 HP인증 HP0-Y16덤프의 유효기간을 연장시켜드리는 셈입니다.퍼펙트한 구매후는 서비스는ITExamDump의 HP인증 HP0-Y16덤프를 구매하시면 받을수 있습니다.
HP인증 HP0-Y16시험패스는 IT업계종사자들이 승진 혹은 연봉협상 혹은 이직 등 보든 면에서 날개를 가해준것과 같습니다.IT업계는 HP인증 HP0-Y16시험을 패스한 전문가를 필요로 하고 있습니다. ITExamDump의HP인증 HP0-Y16덤프로 시험을 패스하고 자격증을 취득하여 더욱더 큰 무대로 진출해보세요.
시험 번호/코드: HP0-Y16
시험 이름: HP (ProCurve Network Immunity Solutions)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 88 문항
업데이트: 2014-03-05
ITExamDump의HP HP0-Y16인증시험의 자료 메뉴에는HP HP0-Y16인증시험실기와HP HP0-Y16인증시험 문제집으로 나누어져 있습니다.우리 사이트에서 관련된 학습가이드를 만나보실 수 있습니다. 우리 ITExamDump의HP HP0-Y16인증시험자료를 자세히 보시면 제일 알맞고 보장도가 높으며 또한 제일 전면적인 것을 느끼게 될 것입니다.
ITExamDump를 선택함으로, ITExamDump는 여러분HP인증HP0-Y16시험을 패스할 수 있도록 보장하고,만약 시험실패시 ITExamDump에서는 덤프비용전액환불을 약속합니다.
ITExamDump는IT업계전문가들이 그들의 노하우와 몇 년간의 경험 등으로 자료의 정확도를 높여 응시자들의 요구를 만족시켜 드립니다. 우리는 꼭 한번에HP HP0-Y16시험을 패스할 수 있도록 도와드릴 것입니다. 여러분은HP HP0-Y16시험자료 구매로 제일 정확하고 또 최신시험버전의 문제와 답을 사용할 수 있습니다. Pass4Tes의 인증시험적중 율은 아주 높습니다. 때문에 많은 IT인증시험준비중인분들에세 많은 편리를 드릴수 있습니다.100%정확도 100%신뢰.여러분은 마음편히 응시하시면 됩니다.
여러분은 우리. ITExamDump의HP HP0-Y16시험자료 즉 덤프의 문제와 답만 있으시면HP HP0-Y16인증시험을 아주 간단하게 패스하실 수 있습니다.그리고 관련 업계에서 여러분의 지위상승은 자연적 이로 이루어집니다. ITExamDump의 덤프를 장바구니에 넣으세요. 그리고 ITExamDump에서는 무료로 24시간 온라인상담이 있습니다.
HP0-Y16 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-Y16.html
NO.1 Which events can be signs of an unauthorized port scan? (Select two.)
A. Port Anomaly
B. DNS Tunneling
C. TCP/UDP Fanout
D. UDP Protocol Anomaly
E. TCP Protocol Anomaly
Answer: CE
HP HP0-Y16인증 HP0-Y16 HP0-Y16덤프 HP0-Y16기출문제
NO.2 What might indicate that the sensitivity for IP fanout has been set too high?
A. IP Fanout events appear in the Events tab for almost every switch.
B. Although you do not see IP Fanout events, the IP Fanout alert triggers.
C. IP Fanout events appear in the Events tab for one switch but not others.
D. There are no IP Fanout events for days although you have configured an IP Fanout alert.
Answer: A
HP덤프 HP0-Y16자격증 HP0-Y16기출문제 HP0-Y16
NO.3 Which misconfiguration on PCM+ causes ProCurve NIM to fail to detect any anomalies in traffic?
A. the wrong sFlow version
B. an incorrect operator password
C. an incorrect manager password
D. an incorrect SNMP community name
Answer: D
HP HP0-Y16인증 HP0-Y16 dumps
NO.4 What must you do to configure a Port Rate Limit action?
A. Set the rate limit as a percentage.
B. Set the rate limit as a QoS priority value.
C. Set the rate limit as an absolute value in Kbps.
D. Enable the limit, leaving the rate to be determined by the switch configuration.
Answer: A
HP HP0-Y16 HP0-Y16 dump
NO.5 What is a feature of anomaly-based threat detection but not signature-based threat detection?
A. detecting worms
B. detecting DoS attacks
C. detecting protocol anomalies
D. detecting undocumented attacks
Answer: D
HP HP0-Y16자격증 HP0-Y16덤프 HP0-Y16덤프 HP0-Y16
NO.6 A network already has an Intrusion Prevention System (IPS) that is installed between a group of
servers and the rest of the network. Which benefits does ProCurve NIM add in a NIM + IPS deployment?
(Select two.)
A. deep packet inspection
B. signature-based detection
C. remediation of infected endpoints
D. protection for other resources throughout the network
E. applies actions closer to the point of origin of the attack
Answer: DE
HP HP0-Y16 HP0-Y16덤프 HP0-Y16 HP0-Y16 pdf
NO.7 Click the Exhibit button.
Given the information shown in the exhibit, what do you know about alerts on the 10.1.1.1 device over the
last five hours? (Note: The orange color corresponds with Major severity.)
A. The device has received only Major alerts.
B. The majority of alerts on the device are Major alerts.
C. The highest severity for an alert on this device is Major.
D. The most recent alert received on the device was a Major alert.
Answer: C
HP HP0-Y16 HP0-Y16 pdf HP0-Y16 dumps
NO.8 Which statement is true about the role that events play in ProCurve NIM?
A. When a particular event occurs, ProCurve NIM executes the corresponding alert.
B. When a particular event occurs, ProCurve NIM executes the corresponding policy.
C. When a particular number of events occur within a set time window, ProCurve NIM triggers the
corresponding alert.
D. When a particular number of events occur within a set time window, ProCurve NIM triggers the
corresponding policy.
Answer: C
HP HP0-Y16자료 HP0-Y16자격증 HP0-Y16자격증 HP0-Y16
NO.9 How does ProCurve NIM determine the severity level for a security alert?
A. from the violation count for the associated event
B. from the event, and the severity cannot be overridden
C. from the event, unless overridden by the alert configuration
D. from the event for trap events and from the alert configuration for other events
Answer: C
HP HP0-Y16 dump HP0-Y16기출문제
NO.10 Which statement is true about setting up an action for dynamic remote mirroring?
A. You should configure the mirror source before configuring the action.
B. You should configure the mirror destination before configuring the action.
C. You configure both the mirror source and destination as part of configuring the action.
D. You should configure both the mirror source and destination before configuring the action.
Answer: B
HP자료 HP0-Y16인증 HP0-Y16최신덤프 HP0-Y16자료 HP0-Y16최신덤프
NO.11 Your company's regulatory compliance group has asked you for a record of changes to the Policy
Manager policies. Which report should you generate?
A. Security Audit
B. Actions by Policy
C. Executed Policies
D. Automation (Policy) History
Answer: C
HP dump HP0-Y16 HP0-Y16
NO.12 How does a ProCurve Network Immunity Solution protect a network?
A. It deals with threats from authorized users.
B. It stops unauthorized users from connecting.
C. It customizes users' rights based on their identity.
D. It filters Web content and email while searching for viruses.
Answer: A
HP인증 HP0-Y16자료 HP0-Y16
NO.13 What should you do to set up your network infrastructure for remote mirroring?
A. Enable jumbo frames.
B. Enable frame fragmentation.
C. Raise the maximum transmit unit (MTU).
D. Reserve uplink ports for the mirroring session.
Answer: A
HP HP0-Y16기출문제 HP0-Y16 HP0-Y16 dumps HP0-Y16 HP0-Y16자격증
NO.14 Which alert can be triggered by SNMP traps sent by ProCurve switches?
A. default External
B. default IP Fanout
C. default IP Spoofing
D. default Virus Throttle
E. default ProCurve SNMP
Answer: D
HP덤프 HP0-Y16 dump HP0-Y16 dump HP0-Y16 HP0-Y16 HP0-Y16 pdf
NO.15 How do you configure PCM+ to generate periodic reports?
A. Select the Reports button in the global toolbar.
B. Enable the periodic reports setting in PCM+ Preferences.
C. Configure the schedule in the appropriate Reports Wizard.
D. Create policies with schedule-driven alerts and report actions.
Answer: D
HP HP0-Y16최신덤프 HP0-Y16시험문제 HP0-Y16덤프 HP0-Y16
NO.16 Which tab is added to PCM+ when you install ProCurve NIM?
A. Policy Events
B. Security Audit
C. Event Browser
D. Security Activity
Answer: D
HP HP0-Y16 HP0-Y16 dumps
NO.17 Click the Exhibit button.
What are reasons to configure the policy settings shown in the exhibit? (Select two.)
A. You want the policy to respond to threats from offenders within this group.
B. You want ProCurve NIM to apply the policy for threats detected in this group.
C. You have set the policy to a source group, so you must set the target group to match.
D. You want to enable dynamic local port mirroring on set ports, which compose this group.
E. The policy action is MAC Lockout, and you want to lock the offender out of the entire group.
Answer: DE
HP덤프 HP0-Y16 dumps HP0-Y16
NO.18 Which threat mitigation action is supported on ProCurve wireless devices?
A. Port Disable
B. MAC Lockout
C. Port Rate Limit
D. Quarantine VLAN
Answer: B
HP인증 HP0-Y16덤프 HP0-Y16자료 HP0-Y16 pdf
NO.19 What is the intended purpose of the default traffic sampling action of ProCurve NIM?
A. to prevent ProCurve NIM from triggering false positives
B. to help PCM+/NIM periodically begin to monitor new ports
C. to send traffic for increased analysis to an Intrusion Detection System (IDS)
D. to allow ProCurve NIM to take immediate action against the most probable threats
Answer: B
HP HP0-Y16자료 HP0-Y16 HP0-Y16 HP0-Y16
NO.20 Click the Exhibit button.
Which port in the exhibit should you select in PCM+ and configure as the mirror destination?
A. 1
B. A6
C. X0
D. B16
E. 25-48
Answer: B
HP덤프 HP0-Y16 HP0-Y16기출문제 HP0-Y16시험문제 HP0-Y16 pdf
NO.21 Click the Exhibit button.
You are configuring a Quarantine VLAN action.
Which area in the exhibit displays settings that allow ProCurve NIM to always place the offender in the
Quarantine VLAN?
A. a
B. b
C. c
D. d
Answer: D
HP시험문제 HP0-Y16 pdf HP0-Y16 HP0-Y16 HP0-Y16인증
NO.22 Which action can help you troubleshoot a policy in realtime from PCM?
A. Port Mirror
B. Notify (Email)
C. Message Dialog
D. Traffic Sampling
Answer: C
HP자격증 HP0-Y16 HP0-Y16 HP0-Y16
NO.23 You want to set up different external alerts based on the specific type of threat. Which settings can
help you accomplish this task? (Select two.)
A. Trap ID
B. Severity
C. Description
D. Anomaly ID
E. Violation Count
Answer: AC
HP자격증 HP0-Y16 HP0-Y16자격증 HP0-Y16덤프
NO.24 From which NBAD event should you often exclude your servers?
A. DNS Tunneling
B. TCP/UDP Fanout
C. Protocol Anomaly
D. Packet Size Deviation
Answer: B
HP덤프 HP0-Y16인증 HP0-Y16 HP0-Y16 HP0-Y16 HP0-Y16기출문제
NO.25 ProCurve NIM was registering few TCP/UDP Fanout events. You have raised the sensitivity, and
many false positive TCP/UDP Fanout events are now triggered throughout the network. What should you
do next? (Select two.)
A. Lower the sensitivity to the previous level.
B. Remove the TCP/UDP alert from all policies.
C. Plan and create a Policy Manager policy to deal with false positive events.
D. Exclude the devices triggering the false positive events from the TCP/UDP fanout.
Answer: AD
HP시험문제 HP0-Y16 dumps HP0-Y16인증 HP0-Y16덤프 HP0-Y16
NO.26 By default, which NBAD event will trigger traffic sampling on a port?
A. Duplicate IP
B. Virus Throttle
C. Protocol Anomaly
D. Packet Size Deviation
Answer: D
HP자료 HP0-Y16 HP0-Y16자격증
NO.27 You want to display and print a list of all events related to the Policy Manager. What should you do?
A. From the Reports menu, select the Policy Events report.
B. In Interconnect Devices, click the Events tab; filter for Policy Manager; click the Print button.
C. From the Reports menu, select the Events report; filter for Policy Manager in the Report Wizard.
D. In Network Management Home, click the Events tab; filter for Policy Manager; click the Print button.
Answer: D
HP HP0-Y16시험문제 HP0-Y16덤프 HP0-Y16시험문제 HP0-Y16시험문제
NO.28 When should the unified NIM + IDS deployment option be used?
A. to take immediate action to protect key resources and also track threats to the source
B. to add threat protection to the features of ProCurve NIM, which include only threat detection
C. to allow ProCurve NIM to mirror suspicious traffic to an external device for additional analysis
D. to protect against threats from wireless devices, which ProCurve NIM is not able to do on its own
Answer: C
HP HP0-Y16 HP0-Y16 pdf
NO.29 What is a reason to create a custom group for a server zone and set that group as the source for a NIM
policy?
A. Servers handle more mission-critical traffic, so you set less drastic actions.
B. Servers trigger more false positives, so you set the NBAD sensitivities lower.
C. Threats are targeted to servers at all times, so you set the policy to any time.
D. Threats that are targeted to servers are more serious, so you set harsher actions.
Answer: A
HP HP0-Y16 HP0-Y16최신덤프
NO.30 Which features are provided in a ProCurve NIM standalone deployment? (Select two.)
A. threat mitigation without the aid of PCM+
B. resetting of TCP sessions when threats are detected
C. signature-based detection of worms and other attacks
D. applying mitigation actions near the source of the threat
E. application of different policies based on the threat's place of origin
Answer: DE
HP인증 HP0-Y16기출문제 HP0-Y16최신덤프 HP0-Y16 pdf
ITexamdump의 1z0-460덤프의 VCE테스트프로그램과 C_TBIT44_731덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 MSC-331시험에 대비한 고품질 덤프와 70-561시험 최신버전덤프를 제공해드립니다. 최고품질 VCAC510시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기