2014년 3월 6일 목요일

HP HP0-Y18 덤프자료

ITExamDump의 HP인증 HP0-Y18시험덤프자료는 IT인사들의 많은 찬양을 받아왔습니다.이는ITExamDump의 HP인증 HP0-Y18덤프가 신뢰성을 다시 한번 인증해주는것입니다. HP인증 HP0-Y18시험덤프의 인기는 이 시험과목이 얼마나 중요한지를 증명해줍니다. ITExamDump의 HP인증 HP0-Y18덤프로 이 중요한 IT인증시험을 준비하시면 우수한 성적으로 시험을 통과하여 인정받는 IT전문가로 될것입니다.

ITExamDump의 도움으로 여러분은 많은 시간과 돈을 들이지 않으셔도 혹은 여러학원등을 다니시지 않으셔도 우리 덤프로 안전하게 시험을 통과하실 수 있습니다.HP HP0-Y18시험자료는 우리 ITExamDump에서 실제시험에 의하여 만들어진 것입니다. 지금까지의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는HP HP0-Y18시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다.

시험 번호/코드: HP0-Y18
시험 이름: HP (ProCurve Secure Mobility Solutions)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 104 문항
업데이트: 2014-03-05

만약ITExamDump선택여부에 대하여 망설이게 된다면 여러분은 우선 우리ITExamDump 사이트에서 제공하는HP HP0-Y18관련자료의 일부분 문제와 답 등 샘플을 무료로 다운받아 체험해볼 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. 우리ITExamDump는 여러분이 안전하게HP HP0-Y18시험을 패스할 수 있는 최고의 선택입니다. ITExamDump을 선택함으로써 여러분은 성공도 선택한것이라고 볼수 있습니다.

HP인증 HP0-Y18시험은 IT인증시험중 가장 인기있는 시험입니다. HP인증 HP0-Y18시험패스는 모든 IT인사들의 로망입니다. ITExamDump의 완벽한 HP인증 HP0-Y18덤프로 시험준비하여 고득점으로 자격증을 따보세요.

요즘 같은 인재가 많아지는 사회에도 많은 업계에서는 아직도 관련인재가 부족하다고 합니다.it업계에서도 이러한 상황입니다.HP HP0-Y18시험은 it인증을 받을 수 있는 좋은 시험입니다. 그리고ITExamDump는HP HP0-Y18덤프를 제공하는 사이트입니다.

요즘같이 시간인즉 금이라는 시대에 시간도 절약하고 빠른 시일 내에 학습할 수 있는 ITExamDump의 덤프를 추천합니다. 귀중한 시간절약은 물론이고 한번에HP HP0-Y18인증시험을 패스함으로 여러분의 발전공간을 넓혀줍니다.

IT업계에 종사하고 계시나요? 최근 유행하는HP인증 HP0-Y18 IT인증시험에 도전해볼 생각은 없으신지요? IT 인증자격증 취득 의향이 있으시면 저희. ITExamDump의 HP인증 HP0-Y18덤프로 시험을 준비하시면 100%시험통과 가능합니다. ITExamDump의 HP인증 HP0-Y18덤프는 착한 가격에 고품질을 지닌 최고,최신의 버전입니다. ITExamDump덤프로 가볼가요?

HP0-Y18 덤프무료샘플다운로드하기: http://www.itexamdump.com/HP0-Y18.html

NO.1 What purpose does the second software image on the ProCurve AP 420 serve?
A. It allows you to choose two different images to load onto the AP.
B. It allows you to keep the last software image that was loaded onto the AP.
C. It provides a failsafe image in the event the primary image becomes corrupted.
D. It provides an alternate software version in the event the primary does not support your configuration.
Answer: C

HP자료   HP0-Y18최신덤프   HP0-Y18

NO.2 When can a station no longer communicate with an AP?
A. when the received signal falls below 0 dBm
B. when the received signal falls below the background noise
C. when the received signal falls below the station's receiver sensitivity
D. when the received signal falls below the fade margin for the wireless cell
Answer: C

HP자료   HP0-Y18   HP0-Y18인증   HP0-Y18시험문제   HP0-Y18

NO.3 What does Spanning Tree Protocol (STP) on the ProCurve AP 530 prevent?
A. loops over connections to stations in the wireless network
B. loops over the APs Ethernet and wireless bridge connections
C. loops over connections between stations in the wireless and the wired network
D. loops over connections between only wireless stations associated with multiple APs
Answer: B

HP   HP0-Y18   HP0-Y18기출문제

NO.4 Which security option was part of the original 802. 11 standard?
A. 802. 1X
B. Shared-key WEP
C. Dynamic Wired Equivalent Privacy (WEP)
D. Wi-Fi Protected Access with preshared keys (WPA-PSK)
Answer: B

HP인증   HP0-Y18   HP0-Y18   HP0-Y18

NO.5 What is a function of ProCurve Identity Driven Manager (IDM)?
A. It identifies which wireless users must associate to the wireless network.
B. It enables you to load different configuration files onto your ProCurve Mobility Infrastructure devices.
C. It guides you in creating policies that can be applied, through RADIUS, to either wired or wireless
users.
D. It adds special features to ProCurve Manager (PCM) for configuring radio and wireless security
settings.
Answer: C

HP dumps   HP0-Y18   HP0-Y18자료

NO.6 How many configuration files can be stored on the ProCurve AP 420?
A. 2: the startup-config and the factory default config
B. 3: the startup-config, the factory default config, and one custom config
C. 3: the factory default config, the startup-config, and the backup startup-config
D. 4: the factory default config, the startup-config, the backup startup-config, and one custom config
Answer: A

HP pdf   HP0-Y18   HP0-Y18 pdf   HP0-Y18   HP0-Y18 dumps

NO.7 The ProCurve AP 420 radio has one Basic Service Set Identifier (BSSID), and each of the two AP 530
radios has 16 BSSIDs.What is the implication of this difference?
A. The AP 420 can advertise only 1 WLAN, but the AP 530 can advertise 16.
B. The AP 420 can support only 1 WLAN, but the AP 530 can support 32.
C. The AP 420 can support only 1 WLAN, but the AP 530 can support 16.
D. The AP 420 can advertise only 1 WLAN, but the AP 530 can advertise 32.
Answer: A

HP dump   HP0-Y18   HP0-Y18

NO.8 Your company has a branch office down the street from your main office.You want to connect the
networks between the two offices, and physical cabling is not an option.Which wireless devices should
you select for this environment?
A. two ProCurve AP 420s
B. two ProCurve AP 530s
C. two RP 230s and a Wireless Edge Services xl Module
D. two RP 220s with Yagi antennas and a Wireless Edge Services zl Module
Answer: B

HP   HP0-Y18   HP0-Y18기출문제   HP0-Y18자료

NO.9 Wireless networks present certain challenges.Which wireless network challenge does ProCurve
Mobility Infrastructure Solutions help you address?
A. Users are less productive when using a wireless connection.
B. 802. 11 standards do not provide any guidelines for Layer 2 roaming.
C. 802. 11 standards do not provide any encryption, so you must create VPN tunnels to each end station.
D. Multiple users connect to the network through the same AP, but access must be authorized for each
user.
Answer: D

HP   HP0-Y18   HP0-Y18   HP0-Y18

NO.10 You are configuring a ProCurve AP 530.You configure two WLANs.What is one reason to enable the
first WLAN only on radio 1 and the second WLAN only on radio 2?
A. to overcome environmental obstacles
B. to double the capacity of each WLAN by using two radios
C. to separate different types of wireless traffic into different collision domains
D. to allow users to choose their radio but still connect to the same Basic Service Set (BSS)
Answer: C

HP   HP0-Y18   HP0-Y18

NO.11 What does the slot time determine?
A. the number of seconds the AP waits between sending beacons
B. the length of time the station waits between detecting a transmission and sending a frame
C. the beginning of the 802. 11 frame, which enables the AP and the station to synchronize their
transmissions
D. how long the station can "sleep" before it must become active and check the AP to see if there are any
transmissions waiting for it
Answer: B

HP자격증   HP0-Y18 dump   HP0-Y18   HP0-Y18최신덤프   HP0-Y18   HP0-Y18자격증

NO.12 Which Quality of Service (QoS) mechanism do both the ProCurve AP 420 and the ProCurve AP 530
support?
A. Wi-Fi Multimedia (WMM)
B. SpectraLink Voice Priority (SVP)
C. Differentiated Services (DiffServ)
D. Wi-Fi Multimedia Extensions (WME)
Answer: B

HP dumps   HP0-Y18덤프   HP0-Y18

NO.13 The ProCurve Mobility Manager (PMM) site-planning tool provides an Auto Placement tool.What does
this tool take into account as it places devices on the floor plan?
A. the existing RF interference
B. the obstacles that you have defined
C. other devices already placed on the floor plan
D. the floor plan dimensions and desired capacity
Answer: D

HP   HP0-Y18최신덤프   HP0-Y18 dumps   HP0-Y18

NO.14 You need to provide a wireless network for a small area that will require two access points.For this
wireless network, you want to support both 802. 11b/g and 802. 11a radios throughout the entire
coverage area.What would you choose?
A. two ProCurve AP 420s
B. two ProCurve AP 530s
C. ProCurve Wireless LAN System with two Radio Port (RP) 210s
D. ProCurve Wireless LAN System with one RP 230 and one RP 210
Answer: B

HP   HP0-Y18   HP0-Y18   HP0-Y18   HP0-Y18

NO.15 What is the default management username and password on the ProCurve AP 530?
A. The username is admin, and the password is admin.
B. The username is admin, and the password is procurve.
C. The username is manager, and the password is procurve.
D. The username is admin, and there is no default password.
Answer: A

HP   HP0-Y18최신덤프   HP0-Y18   HP0-Y18   HP0-Y18시험문제

NO.16 You want ProCurve Radio Port (RP) 1's radio to function as a neighbor for RP 2's radio.RP 1 will
monitor RP 2 and take action if RP 2 becomes unavailable.You configure RP 1's radio to take which
action if RP 2 becomes unavailable? (Select two. )
A. Open its data rates.
B. Change the radio's channel.
C. Increase the radio's transmit power.
D. Order stations associated with RP 2 to roam.
E. Change the radio mode from 802. 11a to 802. 11b/g.
Answer: AC

HP   HP0-Y18   HP0-Y18시험문제   HP0-Y18

NO.17 Your company wants to use the 2. 4GHz frequency on both of your ProCurve AP 530 radios.What
must you do so that both radios can use this frequency?
A. Set both radios to either 802. 11g or 802. 11b.
B. Set both radios to either 802. 11g or 802. 11b, and install an external antenna for radio 2.
C. Install an 802. 11b/g card on radio 2, and set both radios to either 802. 11g or 802. 11b.
D. Set one radio to 802. 11g and one radio to 802. 11b, install an external antenna for radio 1, and
configure radio 1 to use an external antenna.
Answer: B 18. Which ProCurve AP 530 feature is most beneficial for a small to medium business that has
strong security needs?
A. It monitors for excessive probes to detect possible intrusion attempts.
B. Its internal RADIUS server provides standalone support for 802. 1X authentication.
C. Unlike the ProCurve AP 420, it can operate all 16 of its wireless LANs in closed system.
D. It supports 802. 11a, and hackers generally do not check for networks on this frequency.
Answer: B

HP dumps   HP0-Y18   HP0-Y18시험문제   HP0-Y18   HP0-Y18   HP0-Y18
19. A network administrator accesses the Marketing WLAN, which is assigned to VLAN 32 on the
ProCurve AP 530.When the AP 530 submits the administrator's login credentials to the RADIUS server,
the RADIUS server returns a dynamic VLAN assignment of 10 to the AP 530.The AP 530 is using the
default settings for dynamic and static VLAN support. In which VLAN does the AP 530 place the network
administrator's traffic?
A. 32, because dynamic VLANs are disabled by default
B. the default management VLAN, because there is a VLAN conflict
C. 10, because dynamic VLAN assignments override static VLAN assignments
D. 32, because static VLAN assignments override dynamic VLAN assignments
Answer: C

HP   HP0-Y18   HP0-Y18인증   HP0-Y18
20. You are configuring a WLAN on the ProCurve AP 420.When students, faculty members, and
administrators associate to the WLAN, you want them to receive the dynamic VLAN assignment for their
particular group.However, when staff members associate to the WLAN you want their traffic to be placed
in the VLAN that is assigned to the WLAN. How do you configure the AP 420 to support these VLAN
assignments?
A. You select the Dynamic VLAN option for the WLAN.Static VLANs are supported by default.
B. You select both the Static and Dynamic VLAN options.These global options apply to the entire AP 420.
C. You select the Enable VLAN option for the WLAN.This option enables support for both static and
dynamic VLANs on this WLAN only.
D. You select the Dynamic VLAN option, which enables both static and dynamic VLANs.This global
option applies to the entire AP 420.
Answer: D

HP자료   HP0-Y18   HP0-Y18   HP0-Y18자격증

ITexamdump의 JN0-730덤프의 VCE테스트프로그램과 200-120덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 3107시험에 대비한 고품질 덤프와 70-463시험 최신버전덤프를 제공해드립니다. 최고품질 250-407시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.

시험자료링크: http://www.itexamdump.com/HP0-Y18.html

댓글 없음:

댓글 쓰기