IT인증시험이 다가오는데 어느 부분부터 공부해야 할지 망설이고 있다구요? 가장 간편하고 시간을 절약하며 한방에 자격증을 취득할수 있는 최고의 방법을 추천해드립니다. 바로 우리ITExamDump IT인증덤프제공사이트입니다. ITExamDump는 고품질 고적중율을 취지로 하여 여러분들인 한방에 시험에서 패스하도록 최선을 다하고 있습니다. 3COM인증3M0-250시험준비중이신 분들은ITExamDump 에서 출시한3COM인증3M0-250 덤프를 선택하세요.
ITExamDump에서는 소프트웨어버전과 PDF버전 두가지버전으로 덤프를 제공해드립니다.PDF버전은 구매사이트에서 무료샘플을 다움받아 체험가능합니다. 소프트웨어버전은실력테스트용으로 PDF버전공부후 보조용으로 사용가능합니다. 3COM 인증3M0-250덤프 무료샘플을 다운받아 체험해보세요.
3COM인증 3M0-250시험에 도전하고 싶으시다면 최강 시험패스율로 유명한ITExamDump의 3COM인증 3M0-250덤프로 시험공부를 해보세요. 시간절약은 물론이고 가격도 착해서 간단한 시험패스에 딱 좋은 선택입니다. 3COM 인증3M0-250시험출제경향을 퍼펙트하게 연구하여ITExamDump에서는3COM 인증3M0-250시험대비덤프를 출시하였습니다. ITExamDump제품은 고객님의 IT자격증 취득의 앞길을 훤히 비추어드립니다.
시험 번호/코드: 3M0-250
시험 이름: 3COM (3Com Certified Enterprise LAN Post-Sales Expert version 1.0)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 50 문항
업데이트: 2013-12-09
ITExamDump의3COM인증 3M0-250시험덤프 공부가이드는 시장에서 가장 최신버전이자 최고의 품질을 지닌 시험공부자료입니다.IT업계에 종사중이라면 IT자격증취득을 승진이나 연봉협상의 수단으로 간주하고 자격증취득을 공을 들여야 합니다.회사다니면서 공부까지 하려면 몸이 힘들어 스트레스가 많이 쌓인다는것을 헤아려주는ITExamDump가 IT인증자격증에 도전하는데 성공하도록3COM인증 3M0-250시험대비덤프를 제공해드립니다.
3M0-250 덤프무료샘플다운로드하기: http://www.itexamdump.com/3M0-250.html
NO.1 Which best defines the mechanism of IEEE 802.1X Network Login?
A.An authenticator requests access to network services; the authentication server enforces authentication
before allowing access to the network and validates the supplicant on behalf of the authenticator
B.A supplicant requests access to network services; the authenticator enforces authentication before
allowing access to the network; the authentication server validates the supplicant on behalf of the
authenticator
C.A supplicant requests access to network services; the authentication server enforces authentication
before allowing access to the network; the authenticator validates the supplicant on behalf of the
authentication server
Answer: B
3COM 3M0-250 3M0-250 3M0-250 3M0-250 3M0-250자격증
NO.2 Which Switch 5500 model(s) does not support Distributed Resilient Routing (DRR)?
A.Switch 5500-EI
B.Switch 5500-SI
C.Switch 5500G-EI
D.All of the above
Answer: B
3COM 3M0-250기출문제 3M0-250기출문제 3M0-250 3M0-250 dump
NO.3 What is the effect of the Simple Network Management Protocol (SNMP) switch command snmp-agent
target-host trap address udp-domain 129.102.149.23 udp-port 5000 params securityname 3comprivate?
A.Configures the switch with a default community string name of 3comprivate
B.Enables the SNMP trap functions on a switch with IP address 129.102.149.23
C.Configures the switch SNMP agent to send traps to the network management station at IP address
129.102.149.23
D.Enables the SNMP trap functions and sets the default community string name of 3compublic on a
switch with IP address 129.102.149.23
Answer: C
3COM 3M0-250 3M0-250 3M0-250 3M0-250자격증
NO.4 How would you view the configuration information that is running on a switch?
A.Use the display startup command
B.Use the display version command
C.Use the display saved-configuration command
D.Use the display current-configuration command
Answer: D
3COM 3M0-250시험문제 3M0-250기출문제 3M0-250 dump 3M0-250
NO.5 What is the reason to connect the up port on the bottom Switch 5500 in the stack to the down port of
the top Switch 5500 in the same stack?
A.Reliability - creates a resilient topology
B.Security - prevents an unauthorized user from connecting to the switch stack
C.Performance - creates the 48-Gbps eXpandable Resilient Networking (XRN) Fabric
D.Management - enables Distributed Resilient Routing (DRR) on the Switch 5500-SI
Answer: A
3COM덤프 3M0-250 3M0-250 3M0-250 pdf
NO.6 You have issued the switch debugging command debugging rip packets from the management terminal,
but you are not receiving any debug output. What is the reason you are not getting any debug output from
the switch?
A.RIP has not been enabled, and therefore there is no debug output
B.Output from the debugging command only goes to the syslog server
C.You forgot to issue the enable debugging command at the System View
D.You forgot to issue the terminal debugging command, directing the output to your management terminal
Answer: D
3COM 3M0-250 3M0-250자격증 3M0-250자료 3M0-250
NO.7 Which three are Switch 5500 configuration requirements when creating an eXpandable Resilient
Networking (XRN) Fabric? (Choose three.)
A.All units in the stack must have the same sysname
B.All units in the stack must be running the same software version
C.A mixture of switch models can be used to create a single XRN Fabric
D.Switch 5500-SI/EI up/down ports must be enabled for fabric mode
E.A switch must be initialized after it has been added to an existing XRN Fabric
Answer: ABD
3COM 3M0-250기출문제 3M0-250
NO.8 You have already configured and enabled individual switch ports for IEEE 802.1X Network Login.
What is required for authentication to be activated on the ports?
A.From the System View, enable 802.1X Network Login
B.From the Ethernet Port View, set the port access control mode
C.From the System View, configure the authentication method for 802.1X users
D.From the Ethernet Port View, configure the authentication method, i.e., chap, pap, eap, etc.
Answer: A
3COM dumps 3M0-250 3M0-250 3M0-250최신덤프 3M0-250
NO.9 How must the MAC Radius Authenticated Device Access (RADA) address be configured on the
Switch 5500?
A.Hexadecimal IP address only
B.Hexadecimal MAC address only
C.Binary or hexadecimal IP or MAC address
D.Binary, decimal or hexadecimal MAC address
Answer: B
3COM인증 3M0-250 3M0-250 3M0-250 3M0-250
NO.10 Which security standard is defined by IEEE 802.1X Network Login?
A.Encryption standard for network authorization
B.Port-based Network Access Control protocol standard
C.Extensible Authentication Protocol (EAP) standard for network authorization
D.Authentication, Authorization and Accounting (AAA) standard for network access
Answer: B
3COM dump 3M0-250 3M0-250최신덤프
NO.11 How does the network administrator configure the up/down Switch 5500-EI/SI ports to operate in fabric
mode?
A.By default, the up/down ports are enabled for fabric mode
B.Execute the command xrn-fabric authentication-mode simple
C.Execute the command resilient-arp enable x/x/x where x/x/x identifies the unit and port number
D.Execute the command fabric-port gigabit x/x/x enable where x/x/x identifies the unit and port number
Answer: D
3COM 3M0-250 3M0-250최신덤프
NO.12 Which two are general Link Aggregation (LA) configuration rules that must be followed when creating
an LA group? (Choose two.)
A.A member link port can only belong to one LA group
B.Aggregated links are mutually exclusive with roving analysis and mirror ports
C.A port must be configured for resilient links before it can be configured as a member of an LA group
D.LA ports can only be configured if Link Aggregation Control Protocol (LACP) is enabled on the switches
Answer: AB
3COM 3M0-250 3M0-250 3M0-250 3M0-250
NO.13 Which Switch 5500 PWR LED condition indicates the switch is powered-up and operating normally?
A.Off
B.Green
C.Green flashing
D.Solid green when not transmitting user data and flashing green when transmitting user data
Answer: B
3COM 3M0-250 3M0-250자료 3M0-250 pdf
NO.14 Click on the exhibit button.
Which Switch 7700 command shows all the hardware and software information on the modules (review
the output shown in the exhibit)?
A.[SW7700] display device
B.[SW7700] display version
C.[SW7700] display interfaces
D.[SW7700] display current-configuration
Answer: B
3COM 3M0-250 dump 3M0-250 3M0-250최신덤프
NO.15 GARP VLAN Registration Protocol (GVRP) maintains and distributes Virtual LAN (VLAN) registration
information only about the dynamically created VLANs using GARP.
A. True
B. False
Answer: B
3COM 3M0-250 3M0-250 3M0-250 3M0-250
NO.16 Which switch command shows what is installed in the switch and the current operational status?
A.[SW8800-14slot] display device
B.[SW8800-14slot] display system
C.[SW8800-14slot] display startup
D.[SW8800-14slot] display current-configuration
Answer: A
3COM자료 3M0-250 3M0-250기출문제 3M0-250 3M0-250 3M0-250인증
NO.17 An IP address must be configured on a switch before it can be managed using Telnet.
A. True
B. False
Answer: A
3COM기출문제 3M0-250자료 3M0-250
NO.18 What is the result of the command boot boot-loader file-url?
A.Reboots the switch using the file-url for the operational code
B.Updates the switch BootROM with the file-url on the system flash
C.Reboots the switch fabric only using the file-url for the operational code
D.Specifies the switch to use file-url for the operational code on the next boot
Answer: D
3COM 3M0-250최신덤프 3M0-250 3M0-250시험문제
NO.19 Which two are functions of Extensible Authentication Protocol (EAP)? (Choose two.)
A.Provides a framework and transport for the exchange of authentication information between the
authenticator and the supplicant
B.Provides encapsulation for the exchange of information between the authenticator and authentication
server
C.Provides the mechanism for locking/unlocking a switch port based on the results of the supplicants
authentication
D.Provides the mechanism for defining what network resources a user may access based on the
authentication information
Answer: AB
3COM기출문제 3M0-250 3M0-250 3M0-250기출문제
NO.20 You have configured multiple OSPF areas on your network. How do the different OSPF areas
communicate with each other?
A.The Designated Router (DR) uses multicast routing to broadcast advertisements to the other area DRs
B.The Designated Router (DR) connects each OSPF area to the main backbone network and
communicates with the other areas
C.The Area Border Router (ABR) connects each OSPF area to the main backbone network and
communicates with the other areas
D.The Autonomous System Border Router (ASBR) connects each OSPF area to the main backbone
network and communicates with the other areas
Answer: C
3COM 3M0-250 3M0-250시험문제 3M0-250
ITexamdump의 DC0-260덤프의 VCE테스트프로그램과 MB5-700덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 74-338시험에 대비한 고품질 덤프와 70-480시험 최신버전덤프를 제공해드립니다. 최고품질 HP2-H29시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기