2013년 7월 29일 월요일

EMC 자격증 E20-822 E20-475 E20-465 E22-315 E20-520 E20-597 시험덤프

ITExamDump는 전문적인 IT인증시험덤프를 제공하는 사이트입니다.E20-822 E20-475 E20-465 E22-315 E20-520 E20-597인증시험을 패스하려면 아주 현병한 선택입니다. ITExamDump에서는E20-822 E20-475 E20-465 E22-315 E20-520 E20-597관련 자료도 제공함으로 여러분처럼 IT 인증시험에 관심이 많은 분들한테 아주 유용한 자료이자 학습가이드입니다. ITExamDump는 또 여러분이 원하도 필요로 하는 최신 최고버전의E20-822 E20-475 E20-465 E22-315 E20-520 E20-597문제와 답을 제공합니다.


EMC 인증 E20-822 E20-475 E20-465 E22-315 E20-520 E20-597시험대비덤프를 찾고 계시다면ITExamDump가 제일 좋은 선택입니다.저희ITExamDump에서는 여라가지 IT자격증시험에 대비하여 모든 과목의 시험대비 자료를 발췌하였습니다. ITExamDump에서 시험대비덤프자료를 구입하시면 시험불합격시 덤프비용환불신청이 가능하고 덤프 1년 무료 업데이트서비스도 가능합니다. ITExamDump를 선택하시면 후회하지 않을것입니다.


E20-822 E20-475 E20-465 E22-315 E20-520 E20-597인증시험은EMC사의 인중시험입니다.EMC인증사의 시험을 패스한다면 it업계에서의 대우는 달라집니다. 때문에 점점 많은 분들이EMC인증E20-822 E20-475 E20-465 E22-315 E20-520 E20-597시험을 응시합니다.하지만 실질적으로E20-822 E20-475 E20-465 E22-315 E20-520 E20-597시험을 패스하시는 분들은 너무 적습니다.전분적인 지식을 터득하면서 완벽한 준비하고 응시하기에는 너무 많은 시간이 필요합니다.하지만 우리ITExamDump는 이러한 여러분의 시간을 절약해드립니다.


IT인증시험문제는 수시로 변경됩니다. 이 점을 해결하기 위해ITExamDump의EMC인증 E20-822 E20-475 E20-465 E22-315 E20-520 E20-597덤프도 시험변경에 따라 업데이트하도록 최선을 다하고 있습니다.시험문제 변경에 초점을 맞추어 업데이트를 진행한후 업데이트된EMC인증 E20-822 E20-475 E20-465 E22-315 E20-520 E20-597덤프를 1년간 무료로 업데이트서비스를 드립니다.


네트웨크시대인 지금 인터넷에 검색하면 수많은EMC인증 E20-822 E20-475 E20-465 E22-315 E20-520 E20-597시험공부자료가 검색되는데 그중에서도ITExamDump에서 출시한 EMC인증 E20-822 E20-475 E20-465 E22-315 E20-520 E20-597덤프가 가장 높은 인지도를 지니고 있습니다. EMC인증 E20-822 E20-475 E20-465 E22-315 E20-520 E20-597덤프에는EMC인증 E20-822 E20-475 E20-465 E22-315 E20-520 E20-597시험문제의 기출문제와 예상문제가 수록되어있어 덤프에 있는 문제만 잘 공부하시면 시험은 가볍게 패스가능합니다. EMC인증 E20-822 E20-475 E20-465 E22-315 E20-520 E20-597시험을 통과하여 자겨증취득하는 꿈에 더욱 가까이 다가가세요.


시험 번호/코드: E20-822

시험 이름: EMC (CLARiiON Solutions Expert Exam for Storage Administrators)

시험 번호/코드: E20-475

시험 이름: EMC (Content Management Systems Architecture Exam)

시험 번호/코드: E20-465

시험 이름: EMC (Content Management System Administration)

시험 번호/코드: E22-315

시험 이름: EMC (Disk Library and Backup to Disk Technologies)

시험 번호/코드: E20-520

시험 이름: EMC (Calriion solutions specialist exam)

시험 번호/코드: E20-597

시험 이름: EMC (Backup and Recovery Specialist Exam for Storage Administrators)

E20-597 덤프무료샘플다운로드하기: http://www.itexamdump.com/E20-597.html


NO.1 What is the backup command specified in the EMC NetWorker client resource for EMC Centera
backups?
A.savepnpc
B.nsrdasv
C.nsrndmp_save
D.nsrsnap_vss_save.exe
Answer: C

EMC dumps   E20-597 pdf   E20-597자격증

NO.2 What is a characteristic of VCB backups in EMC NetWorker?
A.Supports image and file-based backups
B.Requires a NetWorker client on each virtual machine
C.Requires a storage node on the VCB backup proxy
D.Does not support LAN-free backup
Answer: A

EMC   E20-597   E20-597

NO.3 You have an EMC NetWorker server with one storage node. There is an autoloader with four tape drives.
Two drives each are dedicated to the server and storage node. A new Celerra has been added to the
network with 500 GB of data. What must be done to back up the data on the Celerra?
A. Create a storage node on the Celerra and select NDMP in the "type of storage node" field.
B. Configure a device on the NetWorker server as an NDMP device and back up the Celerra to this
device.
C. Configure a client for the Celerra to use DSA and back up its data to either the NetWorker server or
storage node.
D. Create an NDMP backup pool and add this pool to a save group with other clients.
Answer: C

EMC   E20-597자료   E20-597인증   E20-597최신덤프   E20-597

NO.4 A customer using EMC NetWorker Power edition attempts to set server parallelism to 96. When saving
the changes they notice that the server parallelism reverts back to 64.
What action needs to be taken to set server parallelism to 96.?
A. Set device max sessions to 96.
B. Configure group parallelism to 96.
C. Enable diagnostic mode.
D. Add NetWorker Storage Node Enabler Code.
Answer: D

EMC덤프   E20-597자격증   E20-597   E20-597 pdf   E20-597   E20-597

NO.5 Refer to the exhibit. In an EMC NetWorker environment, the storage node sn1 is down for maintenance.
According to the client properties, what happens when the backup of the client starts?
A. The backup data will be sent to the storage node sn2.
B. The backup will fail as the storage node sn1 is not available.
C. The backup data will be sent to any available storage node.
D. The backup data will be sent to the NetWorker server.
Answer: A

EMC   E20-597   E20-597최신덤프   E20-597 dumps   E20-597 dumps

NO.6 Refer to the exhibit. An EMC NetWorker customer has two data zones, A and B, with autochanger AC1
and AC2, respectively, with four drives each. AC1 is configured as a dedicated autochanger and AC2 is
configured as a shared autochanger.
Two drives of AC2 are statically assigned. How many drives of AC2 can be shared in Zone A?
A. 2
B. 0
C. 4
D. 6
Answer: B

EMC   E20-597   E20-597   E20-597

NO.7 A backup administrator is configuring an EMC NetWorker embedded storage node within an EMC Disk
Library. To ensure that the embedded storage node is used to read the data during clone operations, what
is required?
A.Add the Disk Library engine's hostname to the "Read hostname" field in the device properties.
B.Set the clone storage node value for the embedded storage node client resource to itself.
C.Create a client for the embedded storage node.
D.Create a clone pool and assign the appropriate rights to it.
Answer: A

EMC   E20-597   E20-597   E20-597자격증   E20-597

NO.8 An EMC NetWorker customer wants to perform a complete backup of a SQL server with three
databases. Which save set name should be used?
A.MSSQL:DB
B.MSSQL:*
C.MSSQL:ALLDB
D.MSSQL:
Answer: D

EMC dump   E20-597덤프   E20-597최신덤프   E20-597덤프

NO.9 Which Microsoft VSS component is responsible for creation and maintenance of a shadow copy?
A. Requestor
B. Provider
C. Writer
D. Interceptor
Answer: B

EMC   E20-597 dump   E20-597인증   E20-597 dump   E20-597자격증

NO.10 When adding an EMC NetWorker server's name into the /nsr/res/servers file of a client, which service
must be restarted on the client for the change to take effect?
A. nsrd
B. nsrexecd
C. nsrindexd
D. nsrdb
Answer: B

EMC dump   E20-597   E20-597   E20-597시험문제

NO.11 What is a characteristic of how the EMC NetWorker modules integrate with native applications?
A. The developer of the native application provides a NetWorker module to allow for protection of their
application with NetWorker.
B. The NetWorker module runs on the NetWorker server and acts as an intermediary for data coming
from the NetWorker client module.
C. The NetWorker module acts as an intermediate layer between NetWorker and the native application.
D. The NetWorker module always takes the place of the standard NetWorker client allowing for backup of
applications and file systems.
Answer: C

EMC dump   E20-597   E20-597

NO.12 What is a characteristic of EMC NetWorker SnapImage module backups?
A.Block-level backups of dense file systems
B.Fast block-level backups of a file system mounted on a proxy server
C.Immediate recovery of a file system from a persistent snapshot
D.SAN-based image-level backup and recovery of file systems
Answer: A

EMC시험문제   E20-597최신덤프   E20-597

NO.13 A customer has the following EMC NetWorker configuration:
How many nsrlcpd processes are running on the NetWorker server?
A. 4
B. 12
C. 16
D. 0
Answer: D

EMC dump   E20-597기출문제   E20-597   E20-597 pdf

NO.14 What is a characteristic of cloud volumes in EMC NetWorker?
A.Infinitely appendable
B.Recyclable
C.Space cannot be reclaimed.
D.Data cannot be compressed or encrypted.
Answer: A

EMC   E20-597자료   E20-597자료

NO.15 You have successfully configured three SQL servers for backup with the EMC NetWorker Module for
SQL. These servers are configured as follows:
Scheduled backup of the group shows that all SQL data from the three servers was successfully backed
up. However, when you attempt to recover the SQL data using the standard NetWorker user GUI, you
only see file system data to recover.
What must you do to recover the SQL data backed up with the NetWorker module?
A. Modify the browse time within the NetWorker user GUI to show the period for which you want to
recover.
B. Use the Microsoft SQL Server native tools to recover the data from NetWorker.
C. Modify the save set to include an instance or database name after MSSQL:.
D. Launch the NetWorker User for SQL.
Answer: D

EMC dump   E20-597 pdf   E20-597

댓글 없음:

댓글 쓰기