Microsoft 자격증 070-683 시험문제와 답

ITExamDump의 Microsoft인증 070-683시험덤프는 실제시험의 기출문제와 예상문제를 묶어둔 공부자료로서 시험문제커버율이 상당히 높습니다.IT업계에 계속 종사하려는 IT인사들은 부단히 유력한 자격증을 취득하고 자신의 자리를 보존해야 합니다. ITExamDump의 Microsoft인증 070-683시험덤프로 어려운 Microsoft인증 070-683시험을 쉽게 패스해보세요. IT자격증 취득이 여느때보다 여느일보다 쉬워져 자격증을 많이 따는 꿈을 실현해드립니다.

Microsoft 070-683인증시험도 어려울 뿐만 아니라 신청 또한 어렵습니다.Microsoft 070-683시험은 IT업계에서도 권위가 있고 직위가 있으신 분들이 응시할 수 있는 시험이라고 알고 있습니다. 우리 ITExamDump에서는Microsoft 070-683관련 학습가이드를 제동합니다. ITExamDump 는 우리만의IT전문가들이 만들어낸Microsoft 070-683관련 최신, 최고의 자료와 학습가이드를 준비하고 있습니다. 여러분의 편리하게Microsoft 070-683응시하는데 많은 도움이 될 것입니다.

ITExamDump에서는 가장 최신이자 최고인Microsoft인증 070-683시험덤프를 제공해드려 여러분이 IT업계에서 더 순조롭게 나아가도록 최선을 다해드립니다. Microsoft인증 070-683덤프는 최근 실제시험문제를 연구하여 제작한 제일 철저한 시험전 공부자료입니다. Microsoft인증 070-683시험준비자료는 ITExamDump에서 마련하시면 기적같은 효과를 안겨드립니다.

IT업계 취업 준비생이라면 국제적으로도 승인받는 IT인증자격증 정도는 몇개 취득해야 하지 않을가 싶습니다. Microsoft인증 070-683시험을 통과하여 인기 자격증을 취득하시면 취업경쟁율이 제고되어 취업이 쉬워집니다. ITExamDump의Microsoft인증 070-683덤프는 많은 시험본 분들에 의해 검증된 최신 최고의 덤프공부자료입니다.망설이지 마시고ITExamDump제품으로 한번 가보세요.

ITExamDump 의 Microsoft인증 070-683시험에 도전장을 던지셨나요? 현황에 만족하지 않고 열심히 하는 모습에 박수를 보내드립니다. Microsoft인증 070-683시험을 학원등록하지 않고 많은 공부자료 필요없이ITExamDump 에서 제공해드리는 Microsoft인증 070-683덤프만으로도 가능합니다. 수많은 분들이 검증한Microsoft인증 070-683덤프는 시장에서 가장 최신버전입니다.가격도 친근하구요.

시험 번호/코드: 070-683

시험 이름: Microsoft (TS: Windows 7, Preinstalling for OEMs )

070-683 덤프무료샘플다운로드하기: http://www.itexamdump.com/070-683.html

NO.1 You attempt to capture an image to a Windows Deployment Services (WDS) server as shown in the
exhibit. (Click the Exhibit button.) You need to capture the image to the WDS server. What should you do?
A.Start the reference computer from Windows Preinstallation Environment (Windows PE), and then run
sysprep.exe /audit. Restart the computer by using Pre-Boot eXecution Environment (PXE).
B.Start the reference computer from Windows Preinstallation Environment (Windows PE), and then run
sysprep.exe /generalize. Restart the computer by using Pre-Boot eXecution Environment (PXE).
C.Start Windows 7 on the reference computer, and then run sysprep.exe /audit. Restart the computer by
using Pre-Boot eXecution Environment (PXE).
D.Start Windows 7 on the reference computer, and then run sysprep.exe /generalize. Restart the
computer by using Pre-Boot eXecution Environment (PXE).
Answer: D

Microsoft   070-683자료   070-683자격증   070-683자격증

NO.2 You have Windows Image (WIM) file that contains an image of Windows 7. You plan to deploy the
image to computers that have a third-party hardware component. The device driver for the hardware
component can only be installed by using an executable provided by the hardware vendor. You need to
ensure that the device driver is installed when you deploy the image. What should you do first?
A.On a reference computer, run Drvload.exe.
B.On a reference computer, run Imagex.exe and specify the /apply parameter.
C.On a technicians computer, run Imagex.exe and specify the /mount parameter.
D.On a technicians computer, run Dism.exe and specify the /add-driver parameter.
Answer: B

Microsoft   070-683자격증   070-683 dump

NO.3 You deploy a generalized image on a computer. You need to start Windows 7 on the computer. Your
solution must prevent Windows Welcome from completing. What should you do?
A.Start the computer, and then press SHIFT+F10.
B.Start the computer, and then press CTRL+SHIFT+F3.
C.Start the computer from the Windows 7 installation media, and then select Repair computer.
D.Start the computer from Windows PE, and then run Dism.exe and specify the /add-package parameter.
Answer: B

Microsoft   070-683자료   070-683인증   070-683

NO.4 You have a Windows Image (WIM) file named Image.wim that contains a Windows 7 image. The
default compression settings were used when creating the WIM file. You create a new image. You need to
ensure that both images are stored by using maximum compression. What should you do?
A.Append the new image to Image.wim.
B.Export the existing image, and then append the new image to Image.wim.
C.Run Compact.exe and specify the /c parameter. Run Dism.exe and specify the /remount-WIM
parameter.
D.Run Imagex.exe and specify the /mountrw parameter. Run Dism.exe and specify the /cleanup-WIM
parameter.
Answer: B

Microsoft   070-683   070-683   070-683자료

NO.5 You have a Windows 7 image. You mount the image, add additional files to the image, and then
successfully unmount the image. You notice that the additional files are not in the image. You need to
ensure that the additional files are saved in the image. What should you do?
A.Run imagex.exe and specify the /mount parameter.
B.Run imagex.exe and specify the /commit parameter.
C.Run dism.exe and specify the /scratchdir parameter.
D.Run dism.exe and specify the /cleanup-wim parameter.
Answer: B

Microsoft   070-683   070-683   070-683최신덤프

NO.6 You are preparing a Windows 7 image. You install several out-of-box drivers. You plan to generalize the
image, and then deploy the image to computers that have the exact same hardware as the reference
computer. You need to ensure that when the image is deployed, that hardware devices are not
re-detected during the specialize configuration pass. What should you do before you generalize the
computer?
A.Set the DriverPaths value in the Oobe.xml file.
B.Set the DriverPaths value in the Unattend.xml file.
C.Set the PersistAllDeviceInstalls value in the Oobe.xml file.
D.Set the PersistAllDeviceInstalls value in the Unattend.xml file.
Answer: D

Microsoft   070-683최신덤프   070-683자료   070-683 pdf

NO.7 You mount a Windows 7 image. You need to add a text file to the image. Which tool should you use?
A.Dism.exe
B.ImageX.exe
C.Windows Explorer
D.Windows System Image Manager
Answer: C

Microsoft   070-683   070-683   070-683 dump   070-683시험문제

NO.8 You have a computer that runs Windows 7. You start a capture of the computer to an image and get the
following error message. The process cannot access the file because it is being used by another process.
You need to create an image of the computer. What should you do before you capture the image?
A.Disable the paging file.
B.Stop the Windows Search service.
C.Start the command prompt by using elevated privileges.
D.Start the Computer by using Windows Preinstallation Environment (Windows PE).
Answer: D

Microsoft   070-683   070-683   070-683   070-683   070-683 pdf

NO.9 You deploy a generalized image of Windows 7 to a computer. You start the computer in audit mode.
You need to ensure that Windows Welcome runs when you restart the computer. What should you do?
A.Start the computer, and then press F12.
B.Start the computer, and then press CTRL+SHIFT+F3.
C.Run Sysprep.exe and specify the /oobe parameter.
D.Run Dism.exe and specify the /cleanup-image parameter.
Answer: C

Microsoft최신덤프   070-683 dump   070-683

NO.10 You prepare a Windows 7 image. You need to ensure that the system clock is automatically set to the
Central Time (UTC -6.00) time zone when the image is deployed. Your solution must prevent time zone
customizations during Windows Welcome. What should you do?
A.On the reference computer, modify the Time Zone. Generalize and capture the image.
B.Generalize and capture the image. Create an Oobe.xml file that specifies the time zone.
C.Generalize and capture the image. Create a Winpeshl.ini file that specifies the time zone.
D.On the reference computer, run Dism.exe and specify the /set-timezone parameter. Generalize and
capture the image.
Answer: B

Microsoft최신덤프   070-683   070-683   070-683자료

ITExamDump선택으로Microsoft 070-683시험을 패스하도록 도와드리겠습니다. 우선 우리ITExamDump 사이트에서Microsoft 070-683관련자료의 일부 문제와 답 등 샘플을 제공함으로 여러분은 무료로 다운받아 체험해보실 수 있습니다. 체험 후 우리의ITExamDump에 신뢰감을 느끼게 됩니다. ITExamDump에서 제공하는Microsoft 070-683덤프로 시험 준비하세요. 만약 시험에서 떨어진다면 덤프전액환불을 약속 드립니다.