XML Master인증 I10-002시험을 등록하였는데 시험준비를 어떻게 해애 될지 몰라 고민중이시라면 이 글을 보고ITExamDump를 찾아주세요. ITExamDump의XML Master인증 I10-002덤프샘플을 체험해보시면 시험에 대한 두려움이 사라질것입니다. ITExamDump의XML Master인증 I10-002덤프는XML Master인증 I10-002실제시험문제를 마스터한 기초에서 제작한 최신시험에 대비한 공부자료로서 시험패스율이 100%입니다. 하루 빨리 덤프를 마련하여 시험을 준비하시면 자격증 취득이 빨라집니다.
만약ITExamDump를 선택하였다면 여러분은 반은 성공한 것입니다. 여러분은 아주 빠르게 안전하게 또 쉽게XML Master I10-002인증시험 자격증을 취득하실 수 있습니다. 우리ITExamDump에서 제공되는 모든 덤프들은 모두 100%보장 도를 자랑하며 그리고 우리는 일년무료 업데이트를 제공합니다.
ITExamDump의XML Master인증 I10-002덤프의 인지도는 아주 높습니다. 인지도 높은 원인은XML Master인증 I10-002덤프의 시험적중율이 높고 가격이 친근하고 구매후 서비스가 끝내주기 때문입니다. ITExamDump의XML Master인증 I10-002덤프로XML Master인증 I10-002시험에 도전해보세요.
ITExamDump는 여러분을 성공으로 가는 길에 도움을 드리는 사이트입니다. ITExamDump에서는 여러분이 안전하게 간단하게XML Master인증I10-002시험을 패스할 수 있는 자료들을 제공함으로 빠른 시일 내에 IT관련지식을 터득하고 한번에 시험을 패스하실 수 있습니다.
ITExamDump의XML Master인증 I10-002시험덤프공부가이드 마련은 현명한 선택입니다. XML Master인증 I10-002덤프구매로 시험패스가 쉬워지고 자격증 취득율이 제고되어 공을 많이 들이지 않고서도 성공을 달콤한 열매를 맛볼수 있습니다.
시험 번호/코드: I10-002
시험 이름: XML Master (XML Master: Professional V2)
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 80 문항
업데이트: 2014-02-18
I10-002 덤프무료샘플다운로드하기: http://www.itexamdump.com/I10-002.html
NO.1 Push the Exhibit Button to load the referenced "XML Document 1" and "XML Document 2," and process
XML using "DOM Processing."
Select which of the following is the most appropriate expression of the results under XML 1.0. Line feeds
and/or indents are not reflected in the results.
A. <root2 xmlns="urn:xmlmaster:EX2">
<data xmlns= " urn:xmlmaster:EX1 " >string value</data>
</root2>
B. <root2 xmlns="urn:xmlmaster:EX2">
<data>string value</data>
</root2>
C. <root2 xmlns="urn:xmlmaster:EX2">
<data xmlns= " urn:xmlmaster:EX1 " />
</root2>
D. <root2 xmlns="urn:xmlmaster:EX2">
<data/>
</root2>
Answer: A
XML Master I10-002 I10-002
NO.2 Select which of the following correctly describes WSDL. (WSDL 1.1)
A. WSDL assumes SOAP as the message transmission form
B. When WSDL is defined by a combination of style="rpc" and use="encoded", then
encodingStyle="http://schemas.xmlsoap.org/soap/encoding/" must be designated
C. When WSDL is defined by a combination of style="rpc" and use="encoded", then the encodingStyle
attribute cannot be designated
D. WSDL may be defined by a combination of style="rpc" and use="literal"
Answer: D
XML Master pdf I10-002 dump I10-002 I10-002
NO.3 Push the Exhibit Button to load the referenced "XML document".
[XML Document]
<root><data>lmnop</data></root>
Assume that the "XML Document" is changed to the "Results XML Document." Select which XSLT style
sheet correctly performs the transformation.
Note that the XSLT processor can output transformation results as a document.
[Results XML Document]
<ZZZ><YYY>lmnop</YYY></ZZZ>
A. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:include href="exam.xsl" />
<xsl:template match= " / " >
<xsl:apply-templates select= " root " />
</xsl:template>
<xsl:template match= " root " >
<AAA><BBB><xsl:value-of select= " data " /></BBB></AAA>
</xsl:template>
</xsl:stylesheet>
[exam.xsl]
<xsl:stylesheet version= " 1.0 " xmlns:xsl= " http://www.w3.org/1999/XSL/Transform " >
<xsl:template match= " //root " >
<ZZZ><YYY><xsl:value-of select= " data " /></YYY></ZZZ>
</xsl:template>
</xsl:stylesheet>
B. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:import href="exam.xsl" />
<xsl:template match= " / " >
<xsl:apply-templates select= " root " />
</xsl:template>
<xsl:template match= " root " >
<AAA><BBB><xsl:value-of select= " data " /></BBB></AAA>
</xsl:template>
</xsl:stylesheet>
[exam.xsl]
<xsl:stylesheet version= " 1.0 " xmlns:xsl= " http://www.w3.org/1999/XSL/Transform " >
<xsl:template match= " //root " >
<ZZZ><YYY><xsl:value-of select= " data " /></YYY></ZZZ>
</xsl:template>
</xsl:stylesheet>
C. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:include href="exam.xsl" />
<xsl:template match= " / " >
<xsl:apply-templates select= " root " />
</xsl:template>
<xsl:template match= " root " >
<AAA><BBB><xsl:value-of select= " data " /></BBB></AAA>
</xsl:template>
</xsl:stylesheet>
[exam.xsl]
<xsl:stylesheet version= " 1.0 " xmlns:xsl= " http://www.w3.org/1999/XSL/Transform " >
<xsl:template match= " root " >
<ZZZ><YYY><xsl:value-of select= " data " /></YYY></ZZZ>
</xsl:template>
</xsl:stylesheet>
D. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:import href="exam.xsl" />
<xsl:template match= " / " >
<xsl:apply-templates select= " root " />
</xsl:template>
<xsl:template match= " root " >
<AAA><BBB><xsl:value-of select= " data " /></BBB></AAA>
</xsl:template>
</xsl:stylesheet>
[exam.xsl]
<xsl:stylesheet version= " 1.0 " xmlns:xsl= " http://www.w3.org/1999/XSL/Transform " >
<xsl:template match= " root " >
<ZZZ><YYY><xsl:value-of select= " data " /></YYY></ZZZ>
</xsl:template>
</xsl:stylesheet>
Answer: A
XML Master시험문제 I10-002기출문제 I10-002
NO.4 Push the Exhibit Button to load the referenced "XML Document".
[XML Document]
<TestML xmlns="urn:xmlmaster:testml">
<record level="1" data="100" />
<record level="2" data="250" />
</TestML>
Choose the XML Schema Document that does not correctly define the structure of the "XML Document".
A. <xs:schema
xmlns:xs="http://www.w3.org/2001/XMLSchema"
targetNamespace="urn:xmlmaster:testml"
xmlns:tns="urn:xmlmaster:testml" >
<xs:element name="TestML" type=" tns:testmlType " />
<xs:complexType name="testmlType">
<xs:sequence>
<xs:element ref=" tns:record " maxOccurs="unbounded" />
</xs:sequence>
</xs:complexType>
<xs:element name="record" type=" tns:recordType " />
<xs:complexType name="recordType">
<xs:attribute name="level" type="xs:int" />
<xs:attribute name="data" type="xs:int" />
</xs:complexType>
</xs:schema>
B. <xs:schema
xmlns:xs="http://www.w3.org/2001/XMLSchema"
targetNamespace="urn:xmlmaster:testml"
xmlns="urn:xmlmaster:testml" >
<xs:element name="TestML" type=" testmlType " />
<xs:complexType name="testmlType">
<xs:sequence>
<xs:element ref=" record " maxOccurs="unbounded" />
</xs:sequence>
</xs:complexType>
<xs:element name="record" type=" recordType " />
<xs:complexType name="recordType">
<xs:attribute name="level" type="xs:int" />
<xs:attribute name="data" type="xs:int" />
</xs:complexType>
</xs:schema>
C. <xs:schema
xmlns:xs="http://www.w3.org/2001/XMLSchema"
targetNamespace="urn:xmlmaster:testml" >
<xs:element name="TestML" type=" testmlType " />
<xs:complexType name="testmlType">
<xs:sequence>
<xs:element ref=" record " maxOccurs="unbounded" />
</xs:sequence>
</xs:complexType>
<xs:element name="record" type=" recordType " />
<xs:complexType name="recordType">
<xs:attribute name="level" type="xs:int" />
<xs:attribute name="data" type="xs:int" />
</xs:complexType>
</xs:schema>
D. <schema
xmlns="http://www.w3.org/2001/XMLSchema"
targetNamespace="urn:xmlmaster:testml"
xmlns:tns="urn:xmlmaster:testml">
<element name="TestML" type="tns:testmlType" />
<complexType name="testmlType">
<sequence>
<element ref="tns:record" maxOccurs="unbounded" />
</sequence>
</complexType>
<element name="record" type="tns:recordType" />
<complexType name="recordType">
<attribute name="level" type="int" />
<attribute name="data" type="int" />
</complexType>
</schema>
Answer: C
XML Master I10-002 dumps I10-002자료
NO.5 What must you write in XSLT style sheet (1) to process the following "XML Document" and obtain the
following "transform results"? Select the correct answer below. Note that "#" indicates a line feed, and "=*"
indicates a tab.
Assume that the XSLT processor can output transformation results as a document.
A. Nothing needs to be written.
B. <xml:space="preserve"/>
C. <xsl:preserve-space elements="content"/>
D. <xsl:strip-space elements="doc body"/>
Answer: D
XML Master자격증 I10-002 dumps I10-002 I10-002
NO.6 Push the Exhibit Button to load the referenced "XML Document".
[XML Document]
<root><data>lmnop</data></root>
Assume that the "XML document" is changed to the "Results XML Document." Select which XSLT style
sheet correctly performs the transformation.
Note that the XSLT processor can output transformation results as a document.
[Results XML Document]
<lmnop/>
Or
<lmnop></lmnop>
A. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " root/data " />
</xsl:template>
<xsl:template match= " data " >
<xsl:element name="<xsl:value-of select='.'/>"/>
</xsl:template>
</xsl:stylesheet>
B. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " root/data " />
</xsl:template>
<xsl:template match= " data " >
<xsl:element name="{ . }"/>
</xsl:template>
</xsl:stylesheet>
C. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " root/data " />
</xsl:template>
<xsl:template match= " data " >
<xsl:element name="."/>
</xsl:template>
</xsl:stylesheet>
D. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " root/data " />
</xsl:template>
<xsl:template match= " data " >
<xsl:text disable-output-escaping="no"><</xsl:text>
<xsl:value-of select="."/>
<xsl:text disable-output-escaping="no">/></xsl:text>
</xsl:template>
</xsl:stylesheet>
Answer: B
XML Master덤프 I10-002자격증 I10-002 I10-002덤프 I10-002
NO.7 Push the Exhibit Button to load the referenced "XML Document".
Select which of the following correctly describes the output results of an XSLT transformation of the "XML
Document" using the "XSLT Style Sheet".
Note that the XSLT processor can output transformation results as a document. Line feeds and indents
are not reflected.
A. <record>
<data>100</data>
</record>
B. <record xmlns="urn:xmlmaster:test">
<data>100</data>
</record>
C. <record xmlns="urn:xmlmaster:test">
<data xmlns= "" >100</data>
</record>
D. <record>
<data>100</data>
<data>70</data>
</record>
E. <record xmlns="urn:xmlmaster:test">
<data>100</data>
<data>70</data>
</record>
F. <record xmlns="urn:xmlmaster:test">
<data xmlns= "" >100</data>
<data xmlns= "" >70</data>
</record>
Answer: F
XML Master I10-002최신덤프 I10-002 I10-002자료 I10-002 I10-002최신덤프
NO.8 Which of the following describes the most correct call order of the ContentHandler interface methods
when parsing the following "XML Document" using a non-validating SAX parser? This question reflects
line feeds within the XML document.
[XML Document]
<a>
<b>
c
</b>
</a>
A. startDocument - startElement - characters - startElement - characters - characters - characters -
endElement - characters - endElement - endDocument
B. startDocument - startElement - ignorableWhitespace - startElement - ignorableWhitespace -
characters - ignorableWhitespace - endElement - ignorableWhitespace - endElement - endDocument
C. startDocument - startElement - startElement - characters - endElement - endElement - endDocument
D. startDocument - startElement - startElement - characters - characters - endElement - endElement -
endDocumentW
Answer: A
XML Master기출문제 I10-002기출문제 I10-002 I10-002 I10-002
NO.9 Push the Exhibit Button to load the referenced "XML Document".
Assume that the character "3" is obtained from the "XML document". Select which XSLT style sheet
correctly performs the transformation. (Multiple answers possible. Select two.)
A. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " //data[x='1'][y='2'] " />
</xsl:template>
</xsl:stylesheet>
B. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " //data[(attribute::x='1') and (text()='3')] " />
</xsl:template>
</xsl:stylesheet>
C. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " //data[self='3'] " />
</xsl:template>
</xsl:stylesheet>
D. <xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform">
<xsl:template match= " / " >
<xsl:apply-templates select= " //data[self::*='3'] " />
</xsl:template>
</xsl:stylesheet>
Answer: BD
XML Master I10-002기출문제 I10-002 I10-002기출문제
NO.10 Which of the following correctly describes the DOM (Level 2) Node interface?
A. The Node interface can be used to change the value (nodeValue) of the DOM element node (Element)
B. The Node interface can be used to change the name (nodeName) of the DOM element node (Element)
C. The Node interface can be used to change the value (nodeValue) of the DOM attribute node (Attr)
D. The Node interface can be used to change the name (nodeName) of the DOM attribute node (Attr)
Answer: C
XML Master dumps I10-002 I10-002 I10-002 I10-002덤프
ITexamdump의 C_TFIN22_64덤프의 VCE테스트프로그램과 644-068덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 156-915.76시험에 대비한 고품질 덤프와 00M-503시험 최신버전덤프를 제공해드립니다. 최고품질 HP0-J62시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기