VMware인증 VCAP5-DCD시험을 패스하기 위하여 잠을 설쳐가며 시험준비 공부를 하고 계신 분들은 이 글을 보는 즉시 공부방법이 틀렸구나 하는 생각이 들것입니다. ITExamDump의VMware인증 VCAP5-DCD덤프는 실제시험을 대비하여 제작한 최신버전 공부자료로서 문항수도 적합하여 불필요한 공부는 하지 않으셔도 되게끔 만들어져 있습니다.가격도 착하고 시험패스율 높은ITExamDump의VMware인증 VCAP5-DCD덤프를 애용해보세요. 놀라운 기적을 안겨드릴것입니다.
ITExamDump을 선택함으로 100%인증시험을 패스하실 수 있습니다. 우리는VMware VCAP5-DCD시험의 갱신에 따라 최신의 덤프를 제공할 것입니다. ITExamDump에서는 무료로 24시간 온라인상담이 있으며, ITExamDump의 덤프로VMware VCAP5-DCD시험을 패스하지 못한다면 우리는 덤프전액환불을 약속 드립니다.
VMware VCAP5-DCD인증시험에 응시하고 싶으시다면 좋은 학습자료와 학습 가이드가 필요합니다.VMware VCAP5-DCD시험은 it업계에서도 아주 중요한 인증입니다. 시험패스를 원하신다면 충분한 시험준비는 필수입니다.
여러분이 우리VMware VCAP5-DCD문제와 답을 체험하는 동시에 우리ITExamDump를 선택여부에 대하여 답이 나올 것입니다. 우리는 백프로 여러분들한테 편리함과 통과 율은 보장 드립니다. 여러분이 안전하게VMware VCAP5-DCD시험을 패스할 수 있는 곳은 바로 ITExamDump입니다.
VMware인증 VCAP5-DCD시험은 IT업종종사분들에게 널리 알려진 유명한 자격증을 취득할수 있는 시험과목입니다. VMware인증 VCAP5-DCD시험은 영어로 출제되는만큼 시험난이도가 많이 높습니다.하지만 ITExamDump의VMware인증 VCAP5-DCD덤프만 있다면 아무리 어려운 시험도 쉬워집니다. 오르지 못할 산도 정복할수 있는게ITExamDump제품의 우점입니다. ITExamDump의VMware인증 VCAP5-DCD덤프로 시험을 패스하여 자격증을 취득하면 정상에 오를수 있습니다.
시험 번호/코드: VCAP5-DCD
시험 이름: VMware (VMware Certified Advanced Professional 5 - Data Center Design (VCAP5-DCD))
당신이 구입하기 전에 시도
일년동안 무료 업데이트
100% 환불보장약속
100% 합격율 보장
Q&A: 279 문항
업데이트: 2014-02-18
VMware인증 VCAP5-DCD시험은 IT인증자격증중 가장 인기있는 자격증을 취득하는 필수시험 과목입니다. VMware인증 VCAP5-DCD시험을 패스해야만 자격증 취득이 가능합니다. ITExamDump의VMware인증 VCAP5-DCD는 최신 시험문제 커버율이 높아 시험패스가 아주 간단합니다. VMware인증 VCAP5-DCD덤프만 공부하시면 아무런 우려없이 시험 보셔도 됩니다. 시험합격하면 좋은 소식 전해주세요.
ITExamDump의 도움으로 여러분은 많은 시간과 돈을 들이지 않으셔도 혹은 여러학원등을 다니시지 않으셔도 우리 덤프로 안전하게 시험을 통과하실 수 있습니다.VMware VCAP5-DCD시험자료는 우리 ITExamDump에서 실제시험에 의하여 만들어진 것입니다. 지금까지의 시험문제와 답과 시험문제분석 등입니다. ITExamDump에서 제공하는VMware VCAP5-DCD시험자료의 문제와 답은 실제시험의 문제와 답과 아주 비슷합니다.
VCAP5-DCD 덤프무료샘플다운로드하기: http://www.itexamdump.com/VCAP5-DCD.html
NO.1 You are a virtualization consultant working on a DR project. You have proposed a solution that
uses SAN replication technology to replicate production virtual machine files. This meets the cold
standby requirement.
Which of the following could be a design constraint?
A. The hardware currently being used in the datacenter is out of support.
B. The company is undecided about the choice of centralized storage to be used in the enterprise.
C. The company is at the end of year 1 of a 3-year contract for the point-to-point link between Site A
and Site
D. This link is currently 10 MB.
Answer: C
VMware인증 VCAP5-DCD VCAP5-DCD pdf VCAP5-DCD
Explanation:
An item from the current state analysis that would restrict or change a design choice is potentiallya
constraint. Such factors can limit a design and in some cases prevent the realization of a project
vision. Chapter 2, Gathering Information and Spotting the Gaps
NO.2 Based on the information in the high-level design extract for question 2, which type of data
store would be required?
A. VMFS
B. NFS
Answer: A
VMware VCAP5-DCD dump VCAP5-DCD VCAP5-DCD
Explanation:
Because fault tolerance would be the only VMware technology that would meet the
technicalrequirements, VMFS is the only choice here. Chapter 4, Storage Design - The Logical &
Physical Approaches
NO.3 In the project life cycle, the ____________ defines the vision.
A. IT architect
B. software vendor
C. business
Answer: C
VMware dumps VCAP5-DCD자료 VCAP5-DCD기출문제 VCAP5-DCD dumps VCAP5-DCD
Explanation:
By reviewing the current configuration of a system and mapping the final status of components
asdescribed in the vision, the business identifies the gap between the two. A gap state analysis is a
review of theitems or tasks that are required to progress between the stages. Such an analysis is
useful in creatingmilestone plans, implementation orders, and so on. Chapter 2, Gathering
Information and Spotting the Gaps
NO.4 Storage DRS can be enabled and can balance I/O levels based on _______________
A. real-time stats
B. historical stats
Answer: B
VMware VCAP5-DCD자료 VCAP5-DCD VCAP5-DCD VCAP5-DCD덤프
Explanation:
Storage DRS can balance I/O by using storage vMotion. This would be based on historical valuesfor a
period of time.
Storage DRS would make decisions based on these figures. If the system were using realtimestats,
the machines could potentially migrate a lot more. This could have an effect on the latency
figuresfor some systems. The larger historical sampling in storage DRS allows the system to make a
decision withlimited risk of impacting I/O-unlike moving a virtual machine over and over again.
Chapter 4, Storage Design - The Logical & Physical Approaches
NO.5 You are a technical consultant designing a solution for an online retail company. The project
vision is to deploy a hybrid cloud, with the internal team developing the website on internal
infrastructure and migrating production-ready applications to a hosting provider. The project is
expected to ease deployment and require less infrastructure capital expenditure-without lowering
application quality.
Which of the following is a risk to the project?
A. The solution must adhere to ISO 27001.
B. Change control of the hosting vCloud platform is not under full control of the internal business.
C. The hosting provider outsources the platform support to the platform vendor.
D. The applications to be deployed on the production hosts are not fully developed, although a beta
exists.
Answer: B
VMware VCAP5-DCD인증 VCAP5-DCD VCAP5-DCD VCAP5-DCD
Explanation:
The technical design process enables the platform designer to work in a methodical way and
withothers who have similar objectives. A risk is that a project item could potentially prevent the
vision or aspectsof it (requirements) from being created. Chapter 1, The Technical Design Process
NO.6 When designing a storage platform, which of the following should be considered as part of
the overall design?
A. Capacity
B. I/O requirements of the applications to be supported
C. Disk latency tolerance
D. Growth rate
E. All of the above
Answer: E
VMware dumps VCAP5-DCD자료 VCAP5-DCD
Explanation:
A storage platform logical design requires in-depth analysis of factors that can affect applications. In
the case of storage, aspects that relate to the physical layer-such as the amount of usable space
requiredfor services; the size, number, and speed of disks; and how fast the data is being
produced-could have asubstantial impact to the storage platform. Chapter 4, Storage Design - The
Logical & Physical Approaches
NO.7 A project requirement _______________
A. must be achieved
B. can be set as aspirational but may never be achieved
Answer: A
VMware VCAP5-DCD최신덤프 VCAP5-DCD
Explanation:
A project requirement is a specific deliverable that the business has said must be provided at
theend of a project.
It must always be achieved. Chapter 4, Storage Design - The Logical & Physical Approaches
NO.8 Only a software vendor develops a standard process or configuration.
A. True
B. False
Answer: B
VMware덤프 VCAP5-DCD dump VCAP5-DCD
Explanation:
A best practice is based on experience with delivering a solution.
A new product will have limitedbest-practice information except for vendor- or
vendor-partner-based recommendations.
The longer atechnology is used in a community, the more potential success; therefore, best
practices may berecommended by non-vendor-related people.
It is up to a designer to validate this information rather thanignore it straightaway. Chapter 6,
Validation, Thoughts, and Processes
19. A logical diagram shows vendor-specific information.
A. True
B. False
Answer: B
VMware덤프 VCAP5-DCD시험문제 VCAP5-DCD자격증
Explanation:
A logical diagram shows the high-level components of a design or platform. It may
includedescriptions such as data flow and entity relationships.
However, it does not show specific vendors (such asDell or HP). Chapter 2, Creating the design
20. Which of the following vSphere cluster technologies would meet the application
requirements specified in the high-level design extract for question 2?
A. FT
B. HA
Answer: A
VMware VCAP5-DCD VCAP5-DCD VCAP5-DCD자료 VCAP5-DCD
Explanation:
vSphere HA would need to wait at least 10 seconds before a restart would be possible. Thiswould
not meet requirements. In the event of a restart, it could be possible to be without the application
feeddatabase for about 15 minutes. VMware FT would enable the service to be provided without
additionalredevelopment. Chapter 4, Storage Design - The Logical & Physical Approaches
NO.9 A logical design can contain which of the following? (Choose three)
A. BIOS settings
B. Data flow
C. Key component relationships
D. High-level diagrams
E. Server host names
Answer: B,C,D
VMware VCAP5-DCD자료 VCAP5-DCD기출문제 VCAP5-DCD VCAP5-DCD
Explanation:
A logical diagram can be used to show service components and how they relate to each other.
Alogical diagram is high level in nature and is independent of the hardware used for a solution.
Chapter 2, Presenting the Data Gathered
NO.10 You are a VMware architect employed to design and build application environments and the
underlying platform for a software development company. The company is using a "devops"
approach and has engaged with you at the beginning of the first planning meeting/pre-sprint.
The software has yet to be written. However, you have some high-level specifications that are
subject to change at each of the early meetings.
The ______ is more logical for virtual machine sizing.
A. predictive sizing approach based on current software
B. adaptive sizing approach
Answer: B
VMware기출문제 VCAP5-DCD기출문제 VCAP5-DCD인증 VCAP5-DCD dump
Explanation:
There are two types of scaling approaches in virtual platforms: adaptive and predictive.
Bothapproaches are usable; however, a designer must work out which is the best approach for
each project.
The adaptive approach to guest virtual machine design is a major advantage that virtualization
technologybrings to a datacenter. It allows a guest virtual machine to be created initially on a few
metrics or high-levelrequirements (such as a limited budget) and scaled (that is, grown, not shrunk)
through the virtual machine lifecycle. In many cases, this scaling can be performed hot/live without
outage/downtime to the runningapplications. The predictive approach, on the other hand, requires
more planning and research, and you must know themetrics before deployment. The advantage
here is that once the virtual machine has been deployed, onlyapplication maintenance is required.
The application requirements are known. Chapter 5, Design Approaches
NO.11 You are the technical designer for a vSphere platform transformation project. After
conducting SME interviews and using various platform information-gathering methods, you have
created a high-level design document.
This document specifies the following:
Requirements:
R1. The solution must not have a single point of failure.
R2. Production applications must not have an outage of more than 10 seconds.
R3. Data must be based in the UK.
R4. There is a 7-year retention policy for contracts.
R5. Applications should support existing and developing workloads for the next 3 years' growth.
Spec of servers:
Web 1 vCPU, 2 GB RAM, 100 GB storage App 1 vCPU, 4 GB RAM, 100 Gb storage
DB 2 vCPU, 16 GB RAM, 750 Gb storage
At a late stage in the software development life cycle of a production application developed inhouse,
an unfortunate issue was identified when the application was deployed to the production vSphere
cluster. The production core stacked switch has capacity issues, and this is having a serious impact
on all applications for which the switch is providing network services. Within the test system, the
application works as intended in the single test VLAN and with a single-host configuration.
Which of the following could be tried to help in this situation, from a vSphere perspective? (Choose
two)
A. Redevelop the application for a virtual platform
B. Place the application into a single-vApp network
C. Add DRS rules to keep network traffic within the same host, where possible
D. Configure network I/O control
Answer: B,D
VMware VCAP5-DCD VCAP5-DCD VCAP5-DCD
Explanation:
If you limit the application traffic to a specific dedicated network (that is, a separate VLAN) andusing
enforced DRS affinity rules, the application traffic will not traverse the ESXi host's physical
networkinterfaces. This will ensure that the impact of the application is minimized, while also
ensuring that theapplication itself is not limited. The application servers already have vCPU settings.
This suggests that the system has already beingvirtualized in both types of environments. Network
I/O control could be useful in the event of contention, but therole of a designer would be to plan to
prevent contention where possible; other options would be morebeneficial. In addition,
Requirement 5 specifies that the system should work with workloads over the next 3years. Network
I/O control would suggest contention very early in the platform history. Chapter 4, NetWork -
Logical and Physical Design to allow applications to flow
NO.12 You are working on a hybrid cloud project, where production applications (yet to be fully
developed) are to be deployed. Which of the following is a project requirement?
A. The production data must be in the UK at all times.
B. The hosting partner provides sufficient resources without overcommitment to support
application load.
C. The hosting provider meets uptime expectations.
D. The development team provides the software on time.
Answer: A
VMware기출문제 VCAP5-DCD인증 VCAP5-DCD인증 VCAP5-DCD시험문제
Explanation:
A requirement is a definable and measurable project item. It must be part of the delivery, and
itsremoval cannot be justified. Chapter 2, Definitions of Key Terms
NO.13 The vCenter database is powered off ungracefully, along with a three cluster nodes in a
separate cluster.
Will the failed existing ESXi host nodes restart correctly using Auto Deploy?
A. Yes
B. No
Answer: A
VMware VCAP5-DCD pdf VCAP5-DCD dumps VCAP5-DCD VCAP5-DCD
Explanation:
Auto Deploy enables an untrained IT professional to increase capacity while ensuring quality
andconsistency within a cluster.
However, there is a dependency on the vCenter server and Auto Deploy serverroles at different
times.
In this case, the ESXi hosts have already booted successfully.
This means that allsubsequent reboots will be controlled using configuration from the Auto Deploy
server, not vCenter.
If thevCenter database is impacted, the ESXi hosts will automatically restore.
Even in the event of no vCenteravailability, hosts will use the last-known copy of a distributed switch
or the configured vSphere switch.
Chapter X, Putting it all together
NO.14 Storage DRS is enabled by default.
A. True
B. False
Answer: B
VMware최신덤프 VCAP5-DCD VCAP5-DCD VCAP5-DCD덤프 VCAP5-DCD자격증
Explanation:
Chapter 4, Storage Design - The Logical & Physical Approaches
NO.15 A DR project requires a recovery time objective (RTO) of 4 hours and has a recovery point
objective (RPO) of 2 hours. The system fails at 8 p.m. on a Sunday evening. At what time is the
application expected to be available to the end users?
A. Midnight
B. 10 p.m.
C. 2 a.m.
D. 11 p.m.
Answer: A
VMware최신덤프 VCAP5-DCD VCAP5-DCD자격증 VCAP5-DCD VCAP5-DCD시험문제
Explanation:
The recovery time objective (RTO)-also known as the return to operation-is the amount of timeit
takes to restore a service after a failure has taken place. The recovery point objective (RPO) is the
point intime to which the system needs to be restored following a failure.
Chapter 3, RTO, RPO, and All That Stuff?
NO.16 A best practice can change over time.
A. True
B. False
Answer: A
VMware자료 VCAP5-DCD자료 VCAP5-DCD자격증
Explanation:
A best practice is based on experience with delivering a solution.
A new product will have limitedbest-practice information except for vendor- or
vendor-partner-based recommendations.
The longer atechnology is used in a community, the more potential success; therefore, best
practices can change overtime.
Chapter 6, Validation, Thoughts, and Processes
NO.17 A(n) _____________ is an item that is taken to be true in the design phases but has not been
tested prior to execution.
A. requirement
B. constraint
C. assumption
D. risk
Answer: C
VMware VCAP5-DCD인증 VCAP5-DCD VCAP5-DCD자료 VCAP5-DCD
Explanation:
An assumption could impact your design. It is good to ensure that project team and widerbusiness
are aware of assumptions and that they are agreed and validated as part of the design
considerationprocess. Chapter 2, Gathering Information and Spotting the Gaps
NO.18 Based on the information in the high-level design extract from question 2, what storage
protocol is unsuitable?
A. NFS
B. iSCSI
C. FC
Answer: A
VMware자료 VCAP5-DCD VCAP5-DCD VCAP5-DCD
Explanation:
The requirements state that the application uptime requirements would not be met if using vSphere
HA alone. vSphere HA would invoke a restart of guest virtual machines after at least 10 seconds.
VMware fault tolerance would meet the uptime requirements; a failover would result in zero
downtime of theapplication. This technology can be used only with VMFS; therefore, NFS cannot be
used in this design. Chapter 4, NetWork - Logical and Physical Design to allow applications to flow
ITexamdump의 00M-654덤프의 VCE테스트프로그램과 000-456덤프는 한방에 시험을 패스하도록 도와드립니다. ITexamdump 에서는 최신버전의 3107시험에 대비한 고품질 덤프와 70-461시험 최신버전덤프를 제공해드립니다. 최고품질 HP2-N42시험자료는 100% 간단하게 시험패스하도록 최선을 다하고 있습니다. IT인증시험패스는 이토록 간단합니다.
댓글 없음:
댓글 쓰기